Available shipping methods:
Please note: the standard and expedited shipping costs are only estimates; the actual shipping price will be shown on the order page.
Dispatch: Ships on Jun 23
| Model: GZDY06
Weight and Size
| Product weight: 1.131 kg
Package weight: 1.350 kg
Product Size(L x W x H): 18.00 x 18.00 x 7.50 cm / 7.09 x 7.09 x 2.95 inches
Package Size(L x W x H): 21.00 x 21.00 x 9.50 cm / 8.27 x 8.27 x 3.74 inches
|Package Contents: 1 x Printer Filament|
Frequently Asked Questions
1) Filament not extruding properly?
A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5 deg.C until properly extruded. Please note this will vary with each 3D printer.
2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.
3) Won't the print stick to the build platform?
A: First, review FAQ 1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use ABS Sludge a little goes a long way. You can use this on the build platform on top of kapton tape.
When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.
From kandil ibrahim Jun 08,2017
Nothing missing, Shipping fast and arrived on time, Low price products Overall amazing experiment.
the filament described as ABS, But in fact, it's PLA
Ease of Use 4
Build Quality 4
Overall Rating 4
From Yoni Sep 20,2016
Verey good gives consistent resolts
Ease of Use 5
Build Quality 5
Overall Rating 5