Available shipping methods:
Please note: the standard and expedited shipping costs are only estimates; the actual shipping price will be shown on the order page.
Dispatch: Ships between Apr 29 - May 1
You Save:$ 36.85
| Type: Hexacopter
Features: WiFi FPV
Motor Type: Brushed Motor
Functions: 3D rollover,Camera,Forward/backward,FPV,Headless Mode,One Key Automatic Return,Sideward flight,Speed up,Trim,Turn left/right,Up/down,WiFi Connection,With light
Night Flight: Yes
Built-in Gyro: Yes
Material: Electronic Components,Plastic
Kit Types: RTF
Level: Intermediate Level
| Remote Control: 2.4GHz Wireless Remote Control
Mode: Mode 2 (Left Hand Throttle)
Radio Mode: Mode 2 (Left-hand Throttle)
Detailed Control Distance: About 100m
Transmitter Power: 4 x 1.5V AA battery(not included)
Model Power: Rechargeable Battery
|Flying Time: 9~10mins|
Dimension and Weight
| Package weight: 1.300 kg
Product size (L x W x H): 36.50 x 36.50 x 8.00 cm / 14.37 x 14.37 x 3.15 inches
Package size (L x W x H): 41.00 x 11.00 x 32.00 cm / 16.14 x 4.33 x 12.6 inches
|Package Contents: 1 x Hexacopter, 1 x Transmitter, 4 x Propeller, 1 x Screwdriver, 1 x USB Cable, 1 x Camera, 1 x Phone Holder|
1. Battery power is insufficient, recharge the battery; 2. Check whether the blades are installed correctly.
1. Check the tightness of the blades; 2. Remove the blade that does not spin to see if the motor is working properly; 3. If the motor does not work, check whether the motor gear is connected properly; 4. Remove the body shell, check if the motor cable is connected to the mainboard appropriately.
First turn on the quadcopter power switch, place it on a horizontal position, then turn on the transmitter. Push the left throttle lever to the highest position, and then pull it back to the lowest position. You will hear a clear “di, di” sound and the indicator light will stop flashing and just stay lit, meaning the frequency adjustment is completed and your quadcopter is ready to take off.
1. The quadcopter is not bind to the transmitter correctly, please refer to the user manual to re-modulate the frequency; 2. Battery power is insufficient, recharge the battery.
1. Check the tightness of the blades ; 2. Adjust the trim key ; 3. Re-modulate the frequency, the quadcopter must be put on a flat ground; 4. Re-calibrate gyroscope.
Blades are usually marked with A , B or R; A refers to forward blade, B means inverted blade. Blades with R mark are forward blades, inverted blades are without R mark. Diagonal direction blades have the same steering, adjacent blades have opposite steering.
1. Usually, motor with red and blue wires is usually a forward motor, while the reversed motor presents black and white wires; Diagonal direction motors have the same steering, adjacent motors have opposite steering. 2. On the motor surface sometimes you can find CW or CCW. CW stands for forward motor, while CCW refers to reversed motor.
1. Check and make sure that the batteries are installed by the right polarity. 2. Battery power is insufficient, please full charge the battery, or replace with a full charge battery.
Single battery cell voltage imbalance is a normal phenomenon. Large current discharge will usually lead to voltage difference.This may be caused by poor contact between battery and charger, and the customer should adopt balance charge mode to charge the battery.
By Emare Dec-22/2016 09:12:47
Hello, does it have "air pressure hold" ? thanks regards, Emare
Please kindly note it has no "air pressure hold".
Have a nice day.
By angel isai Mar-02/2016 07:03:28
so fluid that is FPV?
Thank you for your inquiry,that is FPV.Have a nice day.
From Julian Apr 12,2017
Ligero para exteriores
Ease of Use 4
Build Quality 3
Overall Rating 4
muy bueno y divertido
From angel isai Apr 13,2016
fpv muy fluido con el celular
me vino con una elice doblada pero se pudo componer creo que fue error de correos
Ease of Use 4
Build Quality 5
Overall Rating 5