Available shipping methods:
Please note: the standard and expedited shipping costs are only estimates; the actual shipping price will be shown on the order page.
3ml / Two Posts Velocity-style Deck / Dual Bottom Adjustable Air Slots / Top Filling System for E Cigarette
Featuring two posts Velocity-style deck with 2.3mm post holes, the Yosta IGVI R2 atomizer can make huge vapor cloud, good taste and pure flavor. With the four heating wires in the package, it will give you a new wonderful vaping experience.
YOSTA IGVI R2 RTA atomizer
3ml juice capacity
Convenient top fill, two big filling holes
14.5mm two posts Velocity-style deck, 2.3mm post holes
Dual adjustable airflow slots ( 2mm x 10mm )
Stainless steel and glass construction
Gold-plated 510 contact pin
Sloped delrin drip tip
While using this RTA, it will be accompanied by vaporization and liquefaction phenomena. You may find it "leaking" which is accurately the liquor condensation. When the condensate reaches to a certain amount, it will flow out from the side air holes. The liquor condensate is an inevitable result of vaporization which is unable to hold back. You are suggested to clean up the condensate before refill.
| Brand: Yosta
Model: IGVI R2
Type: Rebuildable Atomizer,Rebuildable Tanks
Rebuildable Atomizer: RBA,RTA
Available Color: Silver
Material: Glass,Stainless Steel
Tank Capacity: 3.0ml
Coil Quantity: Dual coil,Single coil
Overall Diameter: 22mm
Dimension and Weight
| Product weight: 0.043 kg
Package weight: 0.150 kg
Product size (L x W x H): 2.20 x 2.20 x 5.70 cm / 0.87 x 0.87 x 2.24 inches
Package size (L x W x H): 3.50 x 12.50 x 6.20 cm / 1.38 x 4.92 x 2.44 inches
|Package Contents: 1 x YOSTA IGVI R2 RTA Atomizer, 4 x Heating Wire, 2 x Insulated Ring, 1 x Replacement Glass Tank, 4 x Screw, 4 x O-ring, 1 x English User Manual, 1 x Allen Key, 1 x Glass Drip Tip|
If the liquid is leaking from the mouthpiece, please first make sure the air pipe was not filled e-liquid. Then verify if the sealing O-rings on the atomizer tube and atomizer head are both intact and in good condition. If the liquid is leaking from the atomizer base, please check if the sealing o-rings on the atomizer base is intact and in good condition and make sure the liquid level is between 10-90pct. You must also make sure all parts of the atomizer are tightly assembled.
1. Clean the atomizer; 2. Prime the atomizer, add more e-liquid to the atomizer.
1. Check if the resistance is correct; 2. Heating wire must support TC mode: Ni200, Ti, 316 stainless steel wire.