Available shipping methods:
Please note: the standard and expedited shipping costs are only estimates; the actual shipping price will be shown on the order page.
IP67 Waterproof Dustproof Shakeproof Android 4.4 7 inch WXGA IPS Screen 2GB RAM 16GB ROM MTK8732VC 64bit Quad Core 1.3GHz
WIFI: 802.11b/g/n wireless internet
Screen type: Capacitive
Camera type: Dual cameras (one front one back)
SIM Card Slot: Dual SIM,Dual Standby
Battery Capacity: 12000mAh
Picture format: BMP,GIF,JPEG,PNG
Additional Features: 3-axis Gyro,3G,Bluetooth,Browser,Calculator,Calendar,E-book,FM,GPS,Gravity Sensing System,Light Sensing System,MP3,MP4,NFC,OTG,Phone,Proximity Sensing System,Sound Recorder,Video Call,WiFi
Product size: 21.60 x 13.80 x 1.70 cm / 8.5 x 5.43 x 0.67 inches
Tablet PC: 1
We can deliver orders to any country. For a detailed explanation about each shipping method, destination and approximate delivery time, please check our website: http://www.gearbest.com/about/shipping-methods.html
Please charge your new device for at least 10 minutes or more before first usage; this ensures normal device boot and optimal operation. For devices with removable batteries, ensure they are properly installed before charging.
It might be because it was not switched off after checking and ran out of power during shipping. Press the power button for 30 seconds to turn it on after you have connected it to the charger. If it doesn’t work, please try to change USB cable and charger. If all the above instructions don’t work and your tablet still won’t charge properly, that might be a trouble of software in your equipment and you need to flash it.
If the systems cannot read the TF card, that might be because the tablet only recognizes some specific kinds of TF card. If only Android can read it and Windows cannot, there must be a problem of BIOS and you need to flash BIOS.
If you want the SD card to be ready on Windows10, you first need to remove your SD card, switch to Windows10, turn off your device and then reboot.
Now all systems are active, so there is no need to ask for an activation code. Your device can be used directly after you connect it to WiFi.
This might happen because of viruses, please try again after scanning and removing viruses by some anti-virus program.
1. You need to make sure whether the keyboard is compatible with the tablet; 2. Make sure you have plugged the cable into the docking slot correctly; 3. You need to reboot your tablet after connecting it to the keyboard.
In usual dual system tablet, there is an Android logo on the mission board, located at the bottom of Windows interface. You can easily switch from Android to Windows by clicking on the logo. If you’re using Android, just swipe down the screen from the top, right side, you will see a changing-to-Windows icon. Tap on it to switch OS.
1. It might be because the battery is empty, we advise you to charge it with the original charger over 10 minutes; 2. Press the power button for 30 seconds to force it to boot; 3. For Android OS there might be a problem of software, so you need to press the power button and volume“+” simultaneously to reset factory /flash; for Windows OS, you should flash.