Description: The mini-sized Smokjoy AIR 50 TC box mod, smaller than half of the iPhone 6S, is the first mod that uses conformal coating on the surface of PCB, which makes it moistureproof, shockproof and durable. Besides, equipped with the USA imported CPU, it is certain that the mod will perform well during use.
Main Features: Smokjoy AIR 50 TC box mod Use conformal coating on the surface of PCB Provided with USA imported CPU Material: aluminium alloy Built-in 1200mAh long-life battery Wattage range: 7 - 50W Support Ni / Ti / SS TC modes Temperature control range: 212 - 600 Deg.F / 100 - 315 Deg.C Resistance range: 0.2 - 3 ohm ( VW mode ), 0.15 - 1 ohm ( Ni / Ti / SS TC mode ) Ergonomics arc design, comfortable to use 510 spring loaded thread connection Screwed battery cover
Please Note: The phone showed in the picture is not included in the package.
Type: Electronic Cigarettes Accessories
Accessories type: MOD
Model: AIR 50
Material: Aluminum Alloy
Mod: Temperature Control Mod,VV/VW Mod
APV Mod Wattage Range: 31-50W
APV Mod Wattage: 7-50W
Temperature Control Range: 212 - 600F / 100 - 315C
Battery Capacity: 1200mAh
Battery Cover Type: Screwed
510 Connector Type: Spring Loaded
Atomizer Connector Diameter: 23mm
Dimension and Weight
Product weight: 0.073 kg
Package weight: 0.210 kg
Product size (L x W x H): 3.40 x 2.25 x 5.80 cm / 1.34 x 0.89 x 2.28 inches
Package size (L x W x H): 6.30 x 4.00 x 11.30 cm / 2.48 x 1.57 x 4.45 inches
Package Contents: 1 x Smokjoy AIR 50 TC Box Mod, 1 x USB Cable
Why does the device always go back automatically to the VW mode from TC mode?
Please make sure that your resistance is correct, otherwise the device will detect itself and will be allowed to be used only in VW mode. You can also try to take out the atomizer and switch to TC mode in room temperature.
Why does the device always show “Device too hot” when I press the fire button?
Please let the device cool down for a while. The higher the wattage, the bigger the current, so as the temperature, causing more heat. You can try to use TCR mode and set the TCR value according to your coil’s material. If the value is not correct, the device will detect itself and give a wrong judgment and output.
Why does the LED start flashing while using?
It means that you have to charge your battery.
What if the device can’t turn on after charging?
Put a new battery in it then turn on;
If the device support upgrade, you can try as follows:
1. Take out the batteries;
2. Plug on the USB to connect to your computer;
3. Open the software on the computer to upgrade.
What if the device keeps showing “Check Battery”/ “Low Battery”/ “Weak Battery”?
We suggest you to change to another set of batteries first. It is recommended to use high-rate batteries.
Please note: the standard and expedited shipping costs are only estimates; the actual shipping price will be shown on the order page.
72 Hour Price Protection Program
At Gearbest we work hard to ensure we can offer our customers high quality products at the lowest possible price. If you purchase a Gearbest product and find that the price has dropped within 72 hours of paying the order, we will refund the difference - no questions asked. Simply contact our Customer Service team at our Support Center with the details. Please note that our 72 hours Price Protection Program does not apply to Flash Deal products.
Prices may fluctuate due to page caches, updates or sales ending; the most up-to-date price takes priority.