The VapeDroid C1D2 is a box mod that utilizes Evolv DNA75 chipset. It features stable temperature control, a magnetic battery cap and can be used with both an 18650 or a bigger capacity 26650 cell. With the advanced chip, it allows for a maximum output power of 75 watts and can fire atomizers all the way down to 0.1 ohm in power mode or 0.05 ohm with a nickel head in temperature control mode.
Equipped with Evolv DNA75 chip
Temperature coefficient of resistance mode supports Ni, Ti, and SS wire
Come with an 18650 adapter, support both LI-MN 18650 and 26650 battery ( not included ), bigger capacity
Power range: 1 - 75W
Temperature control range: 100 - 300 Deg.C / 200 - 600 Deg.F
Resistance: 0.05 - 0.35 ohm ( NI coil ), 0.1 - 0.6 ohm ( TI coil ), 0.2-1.0 ohm ( SS coil ), 0.1 - 4.0 ohm ( regular coil )
Input voltage: 3 - 4.2V
Input current: 0.5 - 28.0A ( 32A pulse)
0.91 inch OLED screen
Screen display: watt setting, battery indication, temperature display, volts display, ohms display
510 spring loaded connection
With magnetic battery cap, more convenient
Made of zinc alloy
The DNA 75 directly measures and limits the temperature of the heating coil during operation. By preventing the coil from becoming too hot regardless of fluid, wicking or airflow, a variety of undesirable situations can be prevented. For example, appropriate temperature settings will prevent the wicking material from charring, which compromises taste and introduces unintended chemicals into the vapor. Appropriate temperature settings will also reduce the breakdown of flavoring and base liquid components, which could impact taste or safety.
Temperature protection is most helpful if the atomizer begins to dry out, the user pauses during a puff, the beginning or end of the puff, or if the wattage setting is inappropriate for the attached atomizer.
When the DNA 75 is used with a temperature sensing atomizer, an additional feature called Preheat is activated. No vapor is produced when the temperature is below the boiling point of the liquid. Preheat applies extra power until the heating coil is up to operating temperature to shorten the delay between pressing the fire button and generating vapor. Because preheat is temperature based, it will not overheat or burn the vapor.
Escribe is a software package used to configure and modify the operation of your DNA 75. It installs on a Windows PC and connects to your DNA 75 using the USB port.
When you connect your DNA 75 to the PC, press the "Connect and Download Settings" button to download the settings presently on your device to Escribe. After you make changes, press the "Upload Settings to Device" to save the new settings to the device.
The atomizers and batteries showed in the pictures are not included in the package.