Description: S - BODY Legend DNA75W TC mod is equipped with stable temperature control Evolv DNA75 chip. It supports 8 output settings with decorative ring and ventilation holes design.
Main Features: Equipped with stable temperature control Evolv DNA75 chip Temperature coefficient of resistance mode supports Ni, Ti, and SS wire Support escribe software updated Battery charging time: about 2.5h Resistance: 0.1 ohm ( NI coil, typical ), 0.2 ohm ( Regular coil, typical ) Made of aluminum alloy and resin material Powered by 1 18650 battery ( not included ) Power range: 1 - 75W Adjustable voltage range: 0.2 - 6.2V 510 spring loaded connection Screw battery cover Made of aluminum alloy
Warm Tip The 2 drip tip adapters showed in the picture are not included in the package. The battery is not included in the package.
Brand: S BODY
Type: Electronic Cigarettes Accessories
Accessories type: MOD
Model: Legend DNA75W
Material: Aluminum Alloy
Mod: Temperature Control Mod
APV Mod Wattage Range: 51-100W
Battery Form Factor: 18650
Battery Cover Type: Screwed
Available color: Green,Orange,Purple,Red
Dimension and Weight
Product weight: 0.144 kg
Package weight: 0.640 kg
Product size (L x W x H): 8.50 x 4.60 x 3.10 cm / 3.35 x 1.81 x 1.22 inches
Package size (L x W x H): 11.00 x 6.30 x 4.70 cm / 4.33 x 2.48 x 1.85 inches
Package Contents: 1 x S - BODY Legend DNA75W TC Mod, 1 x Micro USB Cable, 1 x Decorative Ring, 1 x English Manual
Why does the device always go back automatically to the VW mode from TC mode?
Please make sure that your resistance is correct, otherwise the device will detect itself and will be allowed to be used only in VW mode. You can also try to take out the atomizer and switch to TC mode in room temperature.
Why does the device always show “Device too hot” when I press the fire button?
Please let the device cool down for a while. The higher the wattage, the bigger the current, so as the temperature, causing more heat. You can try to use TCR mode and set the TCR value according to your coil’s material. If the value is not correct, the device will detect itself and give a wrong judgment and output.
Why does the LED start flashing while using?
It means that you have to charge your battery.
What if the device can’t turn on after charging?
Put a new battery in it then turn on;
If the device support upgrade, you can try as follows:
1. Take out the batteries;
2. Plug on the USB to connect to your computer;
3. Open the software on the computer to upgrade.
What if the device keeps showing “Check Battery”/ “Low Battery”/ “Weak Battery”?
We suggest you to change to another set of batteries first. It is recommended to use high-rate batteries.
Please note: the standard and expedited shipping costs are only estimates; the actual shipping price will be shown on the order page.
72 Hour Price Protection Program
At Gearbest we work hard to ensure we can offer our customers high quality products at the lowest possible price. If you purchase a Gearbest product and find that the price has dropped within 72 hours of paying the order, we will refund the difference - no questions asked. Simply contact our Customer Service team at our Support Center with the details. Please note that our 72 hours Price Protection Program does not apply to Flash Deal products.
Prices may fluctuate due to page caches, updates or sales ending; the most up-to-date price takes priority.