Click the power button for 5 times in 2 seconds to turn on the mod and enter the standby mode Click the power button for 3 times in 2 seconds to enter the main menu At standby mode, click the "+" / "-" buttons to adjust the output wattage in 1W increments / decrements 0.8 inch display shows battery level, puffs, temperature, atomizer resistance, output power and voltage Two wattage modes supported: Normal mode: 5-80W, super mode: 81-180W (If you want to turn to this mode, please make sure that the battery continuously discharge current could exceed 25A) Input voltage: DC 9.6V-12.6V Output voltage: DC 1.5-10.5V Output power: 5-180W Resistance range: 0.5 - 4.0 ohm Protections: Short circuit (exceeds 30A), reverse polarity, high temperature and low voltage (lower than 9.6V) Over time protection setting: 1 - 10 seconds for 3 wattage ranges (5-29W / 30-79W / 80-180W) Screen display setting: 1 - 99 minutes Powered by 3 x 18650 batteries (batteries sold separately) Removable beauty ring with 4 vent holes Note: The atomizer in the picture is not included
Type: Electronic Cigarettes Accessories
Accessories type: MOD
Mod: VV/VW Mod
APV Mod Wattage: 5-180W
Features: Variable Power / Voltage
Power supply: Built-in rechargeable battery
Charge way: AC charger
Available Color: Blue, Orange, Silver, Black, Red
Dimension and Weight
Product weight : 0.350 kg
Package weight : 0.500 kg
Product size (L x W x H) : 11.9 x 6.9 x 3 cm / 4.6 x 2.7 x 1.18 inches
Package size (L x W x H) : 13 x 8 x 5 cm
Package Contents: 1 x E-cigarette Mod, 1 x Installation Accessories Bag, 1 x User Manual
FAQ for Vapor Mods
Why does the device always go back automatically to the VW mode from TC mode?
Please make sure that your resistance is correct, otherwise the device will detect itself and will be allowed to be used only in VW mode. You can also try to take out the atomizer and switch to TC mode in room temperature.
Why does the device always show “Device too hot” when I press the fire button?
Please let the device cool down for a while. The higher the wattage, the bigger the current, so as the temperature, causing more heat. You can try to use TCR mode and set the TCR value according to your coil’s material. If the value is not correct, the device will detect itself and give a wrong judgment and output.
Why does the LED start flashing while using?
It means that you have to charge your battery.
What if the device can’t turn on after charging?
Put a new battery in it then turn on;
If the device support upgrade, you can try as follows:
1. Take out the batteries;
2. Plug on the USB to connect to your computer;
3. Open the software on the computer to upgrade.
What if the device keeps showing “Check Battery”/ “Low Battery”/ “Weak Battery”?
We suggest you to change to another set of batteries first. It is recommended to use high-rate batteries.
Customer Questions & Answers
By joyce Jun-11/2015 06:06:17
what batteries do i buy to use .03 coil
Hi,joyce! You don't need to purchase a battery for this item. It comes with a built-in rechargeable battery. Thanks for your inquiry.
By steve May-29/2015 03:05:53
is contact tip spring loaded.
Hi,steve! The contact tip is not spring loaded. Thanks for your inquiry.
By joyce May-17/2015 06:05:14
where do i order batteries an charger for the god mod 180
Hi Joyce, for your inquiry, we kindly recommend the 4 PCs of 3.7V 3200mAh 18650 Samsung Rechargeable Li - ion Battery and Nitecore D4 Li-ion NiCd NiMh LCD Smart Intelligent Battery Charger to you. Please check these products at following link:
Thank your for your inquiry. Please feel free to ask further pre-sale questions.
By Robert Apr-18/2015 06:04:54
Will these still be on sale whenever the are back in stock? And when are they going to be back in stock? In the process of checking out, the pages froze up and when it unfroze, the price had drastically went way up.
this item is in stock now, we tried it ourselves and found we can place an order n=but the price did not change, please refresh the page or clear the cache, and restart the browser , in addition, please do not use a promotion code on this model as it is a discounted item already.
By Daniel Hecker Apr-18/2015 03:04:07
is this Firmware V1 or V2?
Thank you for your inquiry.
The IC board is V2
Got 10 units on special under $50 each, that's a deal that allowed me to make a few extra dollars! Takes 3 18650 batteries, easy to navigate menu, more power than I ever need. Came with a cool drip tip and a nice hard cordura case. Overall an outstanding deal and a good powerful machine!
Pretty large, buttons rattle a bit. Inside cover a little paint overspray. One customer complained that the firing button had a bad soldering job that they had to fix themselves, another customer complained that it died after 2 months of regular use (well, that's how it goes sometimes and things do break). Overall decent quality.
Please note: the standard and expedited shipping costs are only estimates; the actual shipping price will be shown on the order page.
72 Hour Price Protection Program
At Gearbest we work hard to ensure we can offer our customers high quality products at the lowest possible price. If you purchase a Gearbest product and find that the price has dropped within 72 hours of paying the order, we will refund the difference - no questions asked. Simply contact our Customer Service team at our Support Center with the details. Please note that our 72 hours Price Protection Program does not apply to Flash Deal products.
Prices may fluctuate due to page caches, updates or sales ending; the most up-to-date price takes priority.