All
Product keywords
Please enter the email address account
Geeetech® TL-touch 3D-Touch Auto Bed Leveling Sensor
Share to:

Geeetech® TL-touch 3D-Touch Auto Bed Leveling Sensor

- White 286090501

With High Compatibility For 3D Printer
22.62
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: May 24 - May 26, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer Repair Warranty Report item
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought

Main Features:
● This is an auto leveling sensor for 3D printers based on open-source
● Simple, smart, high-precision, it could work with any kinds of bed materials, such as glasses, woods, metals and so on
● It can be operated in the following conditions: one I / O for control ( PWM or software PWM ), One I / O for Zmin( Z Probe ), GND and + 5V power

Cautions:
● Additional power supply will be needed in case your board does not supply enough amperage
● Electronic devices can be damaged or even destroyed if connected to wrongpolarity ( wrong terminal connect to 5V ( + ) and GND ( - ) )
● Pulling / pushing hard on the push-pin can damage 3DTouch and make it less accurate
● Fix push-pin with locking paint after reassembling or adjusting core
● Do not remove or deform elastic material attached on the push-pin

Specification

General

Brand: Geeetech
Materials: PCB
Suitable for: Mainboard Control
Type: DIY Accessories

Dimensions and Weight

Product weight: 0.0190 kg
Package weight: 0.0220 kg
Geeetech® TL-touch 3D-Touch Auto Bed Leveling Sensor With High Compatibility For 3D Printer- White
Geeetech® TL-touch 3D-Touch Auto Bed Leveling Sensor With High Compatibility For 3D Printer- White
Geeetech® TL-touch 3D-Touch Auto Bed Leveling Sensor With High Compatibility For 3D Printer- White
Geeetech® TL-touch 3D-Touch Auto Bed Leveling Sensor With High Compatibility For 3D Printer- White
Geeetech® TL-touch 3D-Touch Auto Bed Leveling Sensor With High Compatibility For 3D Printer- White

Guess you like

Customer Reviews

4.94 out of 5
  • 16
  • 1
  • 0
  • 0
  • 0
See all 17 reviews Write a Review
  • Su
    Very good auto bed leveling system for Ender 3
    This is my second time when I set up BL touch clone device and it went flawlessly as before. Easy to mount on MKS GEN L board, perhaps the original Ender 3 control board need more tweaking to expose the right pins. Works very well to establish leveled bed.

    Apr 05,2019

  • Luis Alvarez
    auto level for 3d printer
    really good sensor, works perfectly with Anet a8 Andrés marlyn software, only do conect correctly the cables in board and calibrate the parameters for never leveling bed manually. I am very satisfied with this product.

    Jan 15,2019

  • Rui
    A simple clone that works
    As a clone I was wary of the quality, but until now it works has expected. And has it works as expected you hardly see it is there.I printed a fan shrowd that could accomodate the mounting screws, because my printer was not natively prepared to mount it.

    Dec 14,2018

  • Davide
    Funziona
    Il sensore arriva provvisto di diversi cavi e raccordi elettronici per fissarlo, alcuni cavi sono però troppo corti, ed il tutto non è proprio semplice da montare, manca anche una spiegazione che però si trova facilmente in internet

    Mar 21,2019

  • HelenAnouk
    Geee, this is good!
    This is the best addition you can buy for your 3D printer. No more fuss with a sheet of paper and manually levelling the printbed. After installation and a simple change in the firmware this levelling sensor does all the work for you.

    Mar 11,2019

  • lr
    Juste parfait
    L'accessoire indispensable pour toute imprimante 3d. Une fois installé les impressions sont simplifiées du tout au tout.

    Apr 30,2019

  • Marto
    A must-have
    I use this on my Anet A8, the wiring can be found on the internet. It is relatively easy to set up. After that bed leveling is not that intimidating and time consuming, it's so easy that you can do it before every print!

    Dec 14,2018

  • Daniel
    Originale? Penso di si.
    Originale? Penso di si.Non capisco perché c'è una resistenza all'interno del kit. Approposito il kit è fornito anche di connettori da collegare/saldare nel bisogno

    Dec 15,2018

  • sakiffi
    Great money
    Installation itself is pretty easy, even without any guidelines - internet is full of them for any specific printer out there. Calibration was total PITA, but what can you expect.

    Dec 25,2018

  • Josh
    great item once you get it to work
    i installed this once i was getting good prints, it was a bit of faff to get it working but once i did it helped my print quality no end

    Jan 15,2019

FAQ for Geeetech® TL-touch 3D-Touch Auto Bed Leveling Sensor

  • Is it compatible with ender3?

    Yes, it is.
  • Does the sensor fit on the Geeetech A30?

    Yes, it does.
  • How does 3D printer work?

    In fact, although there are many different brands of 3D printers, they all basic working principle is same: How does 3D printer work?
  • How to debug the heatbed of 3D printer without auto leveling?

    There are many 3D printers that do not have automatic leveling,the platform leveling is very important. Let's talk about how to debug heating platform: How to debug 3D printer’s heating platform
  • How to stop 3D prints from warping?

    When using a 3D printer, the first layer always fails to print, and warps when print several layers. It is really make people desperation, this post will help you to fix the problem: How to stop 3D prints from warping
  • How to choose the right filament?

    When choosing a proper 3D printer filament, we need to consider the different features of its materials:

    Pick the right 3D printer filament

    3D printer filament comparison

  • How to choose a 3D printer?

    We take a look at the key factors to consider when purchasing a 3D printer: 7 things you need to know before buying a 3D printer
  • How to using Cura 3D slicing software?

    Cura is an open source 3D printer slicing application, it is widely used in 3D printing. Let's talk about how to install Cura 3D slicing software and operate it: Cura 3D slicing software installation and operation
  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

  • why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

  • How to deal with the 3D printer nozzle jam?

    We will introduce a couple of single steps to help you dealing with this problem: How to deal with the 3D printer nozzle jam
  • How to solve cracking or breaking of layers during 3D printing

    We will discuss some typical reasons and corresponding solutions: How to solve cracking or breaking of layers during 3D printing
  • Why 3D printer details can not be printed out?

    There are several options that allow you to successfully print this subtle detail: Why 3D printer details can not be printed out?
  • View more

Customer Questions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

0 Questions & Answers View all>

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service