All
Product keywords
Please enter the email address account
Alfawise TL Smoother Add-on Module for 3D Printer
Share to:

Alfawise TL Smoother Add-on Module for 3D Printer

- Blue Ivy 404232801

Smoothen Every Print Improve Quality
6.91
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer Repair Warranty Report item
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought

Main Features:
● TL Smoother is an add-on module for 3D printer stepper motor drivers
● Greatly improve the print quality at a low cost
● Lower vibration and lower noise for smoother results, effectively avoiding "salmon skin"
● The board provides flyback diodes ( freewheeling diodes ) for the motor outputs
● Plug-and-play, no extra software needed

Note: the main board in the picture is not included.

Specification

General

Brand: Alfawise
Materials: PCB
Suitable for: Accessory
Type: Stepper Motor

Weight and Size

Package size: 8.00 x 6.00 x 1.50 cm / 3.15 x 2.36 x 0.59 inches
Package weight: 0.0280 kg
Product size: 4.00 x 2.50 x 1.00 cm / 1.57 x 0.98 x 0.39 inches
Product weight: 0.0080 kg

Package Contents

Package Contents: 1 x TL Smoother, 1 x Cable
Alfawise TL Smoother Add-on Module for 3D Printers  - Blue Ivy
Alfawise TL Smoother Add-on Module for 3D Printers  - Blue Ivy
Alfawise TL Smoother Add-on Module for 3D Printers  - Blue Ivy
Alfawise TL Smoother Add-on Module for 3D Printers  - Blue Ivy
Alfawise TL Smoother Add-on Module for 3D Printers  - Blue Ivy
Alfawise TL Smoother Add-on Module for 3D Printers  - Blue Ivy

Guess you like

Customer Reviews

4.83 out of 5
  • 24
  • 5
  • 0
  • 0
  • 0
See all 29 reviews Write a Review
  • Les Thodore
    Yes (0) Color: Blue Ivy
    Good for 3d printers
    These modules are great. I was looking for something to smooth out the moire patterns, and it just worked as my expected. Most "salmon skin" of my artifacts are gone and the ones that are not are now just barely visible. Super easy to install and the cables are wired properly so you don’t have to waste anytime correcting that. Once I plugged them into the printer I was able to get printing again. The prints have seemed to be more smooth.
    Such a small price to pay for improving the stability and quality of my prints. Highly recommend.

    Mar 06,2019

  • Greg Isaiah
    Yes (0) Color: Blue Ivy
    Amazing
    I used to be very upset about the salmon skin of my prints, and I tried a lot but nothing good came of it. One of my printer friend told me that the ugly "salmon skin" is due to the instability of alternating current, because the clipping causes vibration of stepper motors, so I need to by a add-on module. I searched on Gearbest and find this, not too expensive, so I quickly decided to buy it. What’s more, it doesn’t need the installation, very convenient, the success is very remarkable, thanks to my friends, thanks to this small product!!

    Jan 12,2019

  • Omar Adela
    Yes (0) Color: Blue Ivy
    A success try
    As the description, this add-on module is plug-and-play setup, no extra software needed, I put it into use in one hour after I received it. It works well with my 3D printer and surely do a good improvement, greatly improved the print quality on my 3D printer. The difference is like night and day. Amazing.
    Quick shipping, they will help eliminate salmon skin if you cant eliminate it with settings. No need to doubt, it worth the cash, can't ask for more than that. It’s an excellent product, recommend it to you all!!

    Apr 01,2019

  • Ddo
    Yes (2) Color: Blue Ivy
    Parfait, Mais...
    Les tl-smoother fonctionne très bien mais attention.
    Au 1er montage, le déplacement des axes de l'imprimante était inversé. Cela n'est pas du au module en lui même mais a la connectique livré avec qui est pour je ne sait quelle raison câblée à l'envers.
    Après avoir remis les connecteurs correctement, cela fonctionne parfaitement.
    Qualité de l'impression améliorée sur une alfawise u30.
    A voir la durée des modules dans le temps.

    Jan 28,2019

  • wack
    Yes (0) Color: Blue Ivy
    These are working well so far
    I put a set of these on my delta printer and so far they are working great. I bought them more for the EMF protection since I sometimes need to move the axis and I don't want to harm the drivers, but they may have made some slight difference in print quality also.

    Jan 06,2019

  • Jey
    Yes (0) Color: Blue Ivy
    Not for me, but may help your delta.
    The boards arrived in working condition, but ultimately failed to improve my prints. This is not a fault of the boards, they just didnt suit my needs, so back they went.

    Jan 15,2019

  • R Kiever
    Yes (0) Color: Blue Ivy
    Doesn't seem to improve anything on PrintrBoards
    I did side by side comparisons with this connected / disconnected and couldn't tell the differences in the prints. It doesn't seem to do anything for my PrintrBoard.

    Jan 09,2019

  • Mail
    Yes (0) Color: Blue Ivy
    Salmon Skin.....GONE!
    These things worked wonders to get rid of the salmon skin problem I was having with my Tevo Tornado. Smooth prints from here on out!

    Dec 19,2018

  • Wilbur Milton
    Yes (0) Color: Blue Ivy
    recommend!
    I bought to see if it would help eliminate the "salmon skin" patterning in my prints. It did exactly that, so five stars.

    Dec 30,2018

  • StefB
    Yes (0) Color: Blue Ivy
    Bien mais ....
    Les modules fonctionnent bien, mais je confirme, les cables sont croisés.
    En effet, une fois en place, toutes les commandes sont inversées.
    Il suffit d'un petit trombone pour sortir les broches du connecteur et inverser l'ordre.

    Feb 22,2019

FAQ for Alfawise TL Smoother Add-on Module for 3D Printer

  • How does 3D printer work?

    In fact, although there are many different brands of 3D printers, they all basic working principle is same: How does 3D printer work?
  • How to debug the heatbed of 3D printer without auto leveling?

    There are many 3D printers that do not have automatic leveling,the platform leveling is very important. Let's talk about how to debug heating platform: How to debug 3D printer’s heating platform
  • How to stop 3D prints from warping?

    When using a 3D printer, the first layer always fails to print, and warps when print several layers. It is really make people desperation, this post will help you to fix the problem: How to stop 3D prints from warping
  • How to choose the right filament?

    When choosing a proper 3D printer filament, we need to consider the different features of its materials:

    Pick the right 3D printer filament

    3D printer filament comparison

  • How to choose a 3D printer?

    We take a look at the key factors to consider when purchasing a 3D printer: 7 things you need to know before buying a 3D printer
  • How to using Cura 3D slicing software?

    Cura is an open source 3D printer slicing application, it is widely used in 3D printing. Let's talk about how to install Cura 3D slicing software and operate it: Cura 3D slicing software installation and operation
  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

  • why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

  • How to deal with the 3D printer nozzle jam?

    We will introduce a couple of single steps to help you dealing with this problem: How to deal with the 3D printer nozzle jam
  • How to solve cracking or breaking of layers during 3D printing

    We will discuss some typical reasons and corresponding solutions: How to solve cracking or breaking of layers during 3D printing
  • Why 3D printer details can not be printed out?

    There are several options that allow you to successfully print this subtle detail: Why 3D printer details can not be printed out?
  • View more

Customer Questions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

0 Questions & Answers View all>

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service