Ramps 1.4 Endstop Switch

- RED 170406201

3D Printer Component for RepRap

$1.62
Save an extra for using the App

Scan the QR code to buy:

  • 1.Download our FREE app on Google play or App Store.
  • 2.Launch the app and scan the QR code to buy directly.

Follow the below steps:

  • 1.Sign in to GearBest.com
  • 2.Add product(s) marked with to your Cart.
  • 3.Open our app, and go to your Cart.
  • 4.Pay for your order for an immediate discount!
  • Ship between: May 28 - May 31
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
  • FREE SHIPPING
;   
Tax Info Price Protection Price Disclaimer

BoMinH

4.9/5.0
  • 5 Star 87%
  • 4 Star 12%
  • 3 Star 1%
  • 2 Star 0%
  • 1 Star 0%
%

Recommended Products for You

Customers Who Bought This Item Also Bought

Ramps 1.4 Endstop Switch 3D Printer Component for RepRap

Description:
The red line should be connected to VCC, black should be connected to GND and the green should be connected to SIGNAL. It's easy to install.

Main Features:
● It uses 22AWG wire, the copper wire inside of it is very thick, it can be resistant to 2A current and 300V voltage.
● The temperature range of insulating layer is wide, up to 80 degrees.
● It's not easy to pull off.
● Convenient to plug and use.

Specification

General

Suitable for: Mainboard Control

Weight and Size

Package size: 6.000 x 4.000 x 1.700 cm / 2.362 x 1.575 x 0.669 inches
Package weight: 0.060 kg
Product size: 4.000 x 2.000 x 0.700 cm / 1.575 x 0.787 x 0.276 inches
Product weight: 0.010 kg

Package Contents

Package Contents: 1 x Ramps 1.4 Endstop Switch, 1 x Cable


Guess you like

FAQ for Ramps 1.4 Endstop Switch

  • How to debug the heatbed of 3D printer without auto leveling?

    You can refer to the post below: How to debug 3D printer’s heating platform
  • How to stop 3D prints from warping?

    You can refer to this post: How to stop 3D prints from warping
  • How to choose the right filament?

  • How to choose a 3D printer?

  • How to using Cura 3D slicing software?

  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

  • why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

  • Why stringing or oozing when printing?

    1. Retraction distance;

    2. Retraction speed;

    3. Temperature is too high;

    4. Long movements over open spaces;

    5. Movement speed.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

Customer Qusetions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

0 Questions & Answers View All>

Customer Reviews

Overall Customer Rating:
Share your thoughts with other customers Write a Review
  • Kris
    Bien
    Color:Red
    Pros:
    Avec une LED rouge lorsque le contact se ferme pratique pour les réglages.
    Le câble est suffisamment long (environ 50cm) pour la majorité des machines.
    Le câble est terminé par un connecteur à chaque extrémité.
    Peut être utilisé directement avec une carte RAMP1.4
    Cons:
    Les trous de fixation sont très proches du switch ce qui rend difficile l'utilisation d'écrou ou de vis à tête hexagonale (les vis à tête fendue, cruciforme ou 6 pans creux ne posent pas de problème)

    Jan 09,2018

    Is this helpful? Yes (0) No (0)
  • Dirk.
    Micro endschalter
    Color:Red
    Pros:
    Ersatz endschalter fuer meinen 3d Drücker komplett mit Steckern und Kabel.
    Gute Qualität sehr guter Preis.
    Bin sehr zufrieden kann ich nur empfehlen!
    Cons:
    Nichts bei dem Preis

    Nov 25,2016

    Is this helpful? Yes (0) No (0)
  • RafaOctoBoot
    Ramps 1.4 Endstop Switch
    Color:Red
    Pros:
    bien empaquetados y funcionan todos perfectamente
    Cons:
    no encontré ningún inconveniente

    May 18,2017

    Is this helpful? Yes (0) No (0)
  • Michal Janik
    Mr
    Color:Red
    Pros:
    Very good quality for that price
    Cons:
    non

    Feb 02,2018

    Is this helpful? Yes (0) No (0)
  • Tiago
    Mr.
    Color:Red
    Pros:
    everything in order
    Cons:
    none so far

    Mar 21,2017

    Is this helpful? Yes (0) No (0)
  • clem
    conforme
    Color:Red
    Pros:
    conforme à la description
    Cons:
    ras

    Feb 01,2017

    Is this helpful? Yes (0) No (0)

Your Recently Viewed Items

See personalized recommendations

New customer? Start here