Hi, rainbow
Register on GearBest: Earn 10 points
Register
1.5KW 24000RPM Electric Spindle Motor Water Cooling Permanent Torque 220V 65mm CNC Engraving
Main Features:
● Maximum speed: 24000rev/min
● Maximum operating frequency: 400Hz
● Radial runout: 0.01mm (10 microns or less that a wire)
● Coaxial degree: 0.025mm (2.5 micron)
● Dimensions: 65mm x 195mm
● Clamping diameter: ER11 chuck, standard 6mm
● Nut model: ER11-A type
● Speed mode: By adjusting the inverter output voltage and operating frequency, can achieve stepless 0-24000
● Cooling: Water cooling mode
● Power interface: Use GX16 waterproof air interfaces, there are 1,234 mark, 123 are connected to the inverter power supply (U, V, W), 4 connected inverter ground
● Lubrication: High temperature grease
General | Suitable for: Heating/Cooling |
---|---|
Weight and Size | Package size: 21.00 x 15.00 x 8.00 cm / 8.27 x 5.91 x 3.15 inches Package weight: 4.0980 kg Product size: 19.50 x 6.50 x 6.50 cm / 7.68 x 2.56 x 2.56 inches Product weight: 3.0000 kg |
Package Contents | Package Contents: 1 x 1.5KW Spindle Electric Motor |
Get GB Points! Be the FIRST to Write a Review!
How does 3D printer work?
How to debug the heatbed of 3D printer without auto leveling?
How to stop 3D prints from warping?
How to choose the right filament?
How to choose a 3D printer?
How to using Cura 3D slicing software?
Why not extruding at start of print?
1. Extruder was not primed before beginning the print;
2. Nozzle starts too close to the bed;
3. The filament has stripped against the drive gear;
4. The extruder is clogged.
Why not extruding enough plastic?
1. Incorrect filament diameter;
2. Increase the extrusion multiplier.
why there are holes and gaps in the top layers?
1. Not enough top solid layers;
2. Infill percentage is too low;
3. Under extrusion.
Why the 3D printer always overheating?
1. Insufficient cooling;
2. Printing at too high of a temperature;
3. Printing too fast;
4. Try printing multiple parts at once.
How to deal with the 3D printer nozzle jam?
How to solve cracking or breaking of layers during 3D printing
Why 3D printer details can not be printed out?
Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!
Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!
Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!
Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!
Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!
Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!
0 Questions & Answers View All>
See personalized recommendations
New customer? Start here