All
Product keywords
Favorites
Please enter the email address account
FULCRUM MINIBOT 1.0 Mini Educational Full Assembled FDM 3D Printer 2.8 inch Touch Screen ±0.1mm High Precision 1.75mm for Children Education
Share to:

FULCRUM MINIBOT 1.0 Mini Educational Full Assembled FDM 3D Printer 2.8 inch Touch Screen ±0.1mm High Precision 1.75mm for Children Education

- White US Plug (3-pin)
466344401

75 x 70 x 70mm Printing Size, Removable Magnetic Platform, Low Noise, 0.4mm Nozzle
5 9 Customer Reviews
139.99 $170.38 18% OFF
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Jun 03 - Jun 05, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • White
  • US Plug (3-pin) EU Plug

  • － +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Add to Favorites (171)
 
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance Exclusive Launch
Recommended for You
Customers also shopped for

Posts About FULCRUM MINIBOT 1.0

More
Selected
Fulcrum Minibot 3D Printer is The Best Educational Tools For Kids.
The Importance of the Hands-on Ability to the Growth of ChildrenHands-on experience is the process of learning by doing and experiencing something. The term “hands-on” is commonly used in any activities that are using the physical use of both hands. If you want to teach the best lesson for your children, you can teach them about some hands-on experience. Here are some benefits that you can get fro
Fun in DIY
8

FULCRUM MINIBOT 1.0 Youtube Video Reviews

FULCRUM MINIBOT 1.0 Descriptions

Children's Best Enlightenment Education Partner
The future world belongs to children, how to protect kids' imagination? MINIBOT 1.0 would be a good choice, the small size does not take up too much space, the printing process has low noise and easy operation. It is very suitable for cultivating children's three-dimensional cognitive ability, so that they can feel the objective existence of the world, continuously improve their creativity, practical work ability, problem solving ability, etc. It is undoubtedly the market the best mini 3D printer for children and students.

●Small Size
Exquisite appearance design, mini and portable, 210 x 210 x 220 mm, you can carry it or place it anywhere to start creation.

●2.8 inch Color Touchscreen
Humanized 45-degree viewing angle operation, and the interaction is simple and friendly. Touch the screen to experience the interaction from your fingers. 7 language operation interface: Chinese, English, French, German, Japanese, Russian, Spanish.

●Intelligent Education
Allow children to use their fancy idea to make unique toys, thereby stimulating children's imagination and creativity, and enhancing their ability to deal with various problems such as three-dimensional

●Removable Magnetic Platform
Disassemble the magnetic platform to facilitate the pick-and-place model at any time to achieve humanized care.

●Ultra-transparent Window for Secure Printing
The transparent window prevents children from touching the hot nozzle during printing and ensures clear observation. This upgraded security measure make this 3D printer particularly suitable for children.

●Resume Printing Function
MINIBOT 1.0 can resume printing from the last recorded position after suffering unexpected power outages or any other unexpected stoppage.

●Low Noise
Brings you the quiet printing experience, can used in office, residential areas, and other environments requiring quiet standards.

●Simple Operation
No installation required, can be used out of the box to avoid inaccurate assembly during assembly and affect accuracy.

● Support WiFi connect (WiFi module needs to be purchased separately).

Specification

General

 Brand: FULCRUM
Model: MINIBOT 1.0
Type: Complete Machine
Material (Frames): ABS
Platform board: Aluminum Alloy
Engraving Accuracy: ± 0.1mm
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: 0 to 260 degree
Layer thickness: 0.1-0.4mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: <100mm/s, the normal print speed 30 ~ 60MM/S
Supporting material: PLA
Material diameter: 1.75mm
Language: Chinese,English,French,German,Japanese,Russian,Spanish
File format: OBJ,STL
Model supporting function: Yes
XY-axis positioning accuracy: 0.05mm
Z-axis positioning accuracy: 0.0025mm
Voltage: 110V/220V
Working Power: Input: AC-220V, output: 24V, 2.5A
Host computer software: Cura,Simplify3D
Packing Type: Assembled packing
System support: windows7 / 8/10 / vista mac os10.1
Connector Type: TF card,USB,Wi-Fi

Dimensions and Weight

 Product weight: 3.5000 kg
Package weight: 4.0000 kg
Product size (L x W x H): 21.00 x 21.00 x 22.00 cm / 8.27 x 8.27 x 8.66 inches
Package size (L x W x H): 26.10 x 26.10 x 32.00 cm / 10.28 x 10.28 x 12.6 inches

Package Contents

 Packing Contents: 1 x 3D Printer
FULCRUM MINIBOT 1.0 Precision 3D Printer Children's Best Enlightenment Education Partner
FULCRUM MINIBOT 1.0 Precision 3D Printer Main Features
FULCRUM MINIBOT 1.0 Precision 3D Printer Small Size
FULCRUM MINIBOT 1.0 Precision 3D Printer Intelligent Education and Development
FULCRUM MINIBOT 1.0 Precision 3D Printer 2.8 inch Touch Screen Removable Magnetic Platform
FULCRUM MINIBOT 1.0 Precision 3D Printer Transparent Windows
FULCRUM MINIBOT 1.0 Precision 3D Printer Resumption After Power-off
FULCRUM MINIBOT 1.0 Precision 3D Printer Low Noise
FULCRUM MINIBOT 1.0 Precision 3D Printer Simple Operation


FULCRUM MINIBOT 1.0 Precision 3D Printer Machine with 2.8 inch Touch Screen 75 x 70 x 70mm Printing Size for Children Education - White US Plug (3-pin)




FULCRUM MINIBOT 1.0 Precision 3D Printer Machine with 2.8 inch Touch Screen 75 x 70 x 70mm Printing Size for Children Education - White US Plug (3-pin)

FULCRUM MINIBOT 1.0 Precision 3D Printer Machine with 2.8 inch Touch Screen 75 x 70 x 70mm Printing Size for Children Education - White US Plug (3-pin)

Suggested Products

Customer Reviews

5 out of 5
  • 9
  • 0
  • 0
  • 0
  • 0
See all 9 reviews Write a Review
  • Lily Madison
    Yes (0) Color: White Size: EU Plug
    Everything is well
    My son is very happy with this printer, it’s his first 3D printer and the very first print worked perfectly.
    The quality of the printer is excellent and the software for slicing is surprisingly good with convenient operation, he learns to use it very quickly, The color screen UI is easy enough to use. If you’re considering a purchase I think you’ll be very satisfied, this mini 3D printer as a gift to the child is generally perfect.

    May 06,2020

  • Liam
    Yes (0) Color: White Size: US Plug (3-pin)
    Recommended product
    The product is packed well without damage. Special thanks to the seller, he's just fine! Always in touch, ready to help. The goods are quality, I was pleased. An excellent printer for small modeling and mastering this direction, as a children education tool is perfect! I recommend the product and website!

    May 05,2020

  • Noah
    Yes (0) Color: White Size: US Plug (3-pin)
    High quality
    The quality, design, assembly dimensions of this printer make it stand out from its competitors since, compared to others, it is a very quiet printer, the magnetic platform is wonderful.

    May 07,2020

  • Isabella
    Yes (0) Color: White Size: EU Plug
    Perfect gift
    I bought this printer as a birthday gift for my daughter, she was very happy to receive it and use it to printing a small toy immediately.

    May 04,2020

  • Ava
    Yes (0) Color: White Size: US Plug (3-pin)
    Save The Space
    The minimalist design makes it one of the best options if you do not have a large space to place it.

    May 05,2020

FAQ for FULCRUM MINIBOT 1.0

  • After boot, the word "ERROR" appears in the upper right corner of the screen.

    The screen displays the word error, indicating that the thermistor is not connected. Try to reinsert the interface cable on the back of the machine and restart the printer. If you confirm that the word error still appears after being plugged in, please contact customer service.

  • Consumables cannot be inserted into the feed pipe.

    Such a problem indicates that the head of the consumable is not straightened. Please try to straighten the head of the consumable as much as possible, or use scissors to cut a bevel in the head of the consumable, and then try to feed in.

  • During the printing process, the extruded consumables cannot be glued to the platform.

    This situation shows that the platform leveling of the machine does not meet the requirements, please repeat the leveling work according to the instructions.

  • There is a strong noise after turning on the device.

    The printer will suddenly increase the working noise after reworking for a long time, which is not a fault problem. Please wait for 3 minutes and wait for the machine to return to normal operation. The noise can be eliminated.

  • It is found that the bottom of the machine is hot during the printing process.

    When the machine is working normally, the motor will heat up. If the temperature at the bottom of the machine rises more than 50 ℃, please turn off the printer and check the working environment. If the temperature is still high after returning to room temperature, please contact customer service.

  • Breakage of consumables caused by extruder gnawing.

    First of all, unscrew the quick joint nut connected to the extruder, click the heating button on the frequency screen, heat the temperature of the sprinkler to 200 ℃ ~ 230 ℃, and remove the consumables. Then re-tighten the quick-connect nut and reload the consumables.

  • How do I update the firmware?

    Log in to www.zhidian3d.com to download the latest printed firmware, store it in the TF card, reboot and wait for the firmware refresh to be completed.

  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

    The solution to under-extrusion (not extruding enough plastic)

  • Why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

    The detail you can read this post:

    Solutions to holes and gaps on the top surface during 3D printing

  • How does 3D printer work?

    In fact, although there are many different brands of 3D printers, they all basic working principle is same: How does 3D printer work?

  • How to debug the heatbed of 3D printer without auto leveling?

    There are many 3D printers that do not have automatic leveling,the platform leveling is very important. Let's talk about how to debug heating platform: How to debug 3D printer’s heating platform

  • How to stop 3D prints from warping?

    When using a 3D printer, the first layer always fails to print, and warps when print several layers. It is really make people desperation, this post will help you to fix the problem: How to stop 3D prints from warping

  • How to choose the right filament?

    When choosing a proper 3D printer filament, we need to consider the different features of its materials:

    Pick the right 3D printer filament

    3D printer filament comparison

  • How to choose a 3D printer?

    We take a look at the key factors to consider when purchasing a 3D printer: 7 things you need to know before buying a 3D printer

  • How to using Cura 3D slicing software?

    Cura is an open source 3D printer slicing application, it is widely used in 3D printing. Let's talk about how to install Cura 3D slicing software and operate it: Cura 3D slicing software installation and operation

  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

  • How to deal with the 3D printer nozzle jam?

    We will introduce a couple of single steps to help you dealing with this problem: How to deal with the 3D printer nozzle jam

  • How to solve cracking or breaking of layers during 3D printing

    We will discuss some typical reasons and corresponding solutions: How to solve cracking or breaking of layers during 3D printing

  • Why 3D printer details can not be printed out?

    There are several options that allow you to successfully print this subtle detail: Why 3D printer details can not be printed out?

  • I want to print a large object, which 3D printer is better for me?

    We recommended the TEVO Black Widow 3D Printer Kit, because of it's large printing area (up to 370 x 250 x 300mm).

    The detail tips for choosing a 3D printer, you can read this post:

    3D Printer buying guide

  • How to make my 3D-printed models look smooth and shining?

    Acetone Vapor is an easy way to smooth your ABS prints. Please check the specific steps in this guide:

    Acetone Vapor - A great way to make your 3D-printed models look smooth and awesome

  • View More

Customer Questions

  • All(1)
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others(1)
Q

This looks ideal to help children see that objects on the screen can be made into real world objects. What age range is recommended?

By rdaubney May-06/2020 12:26:23

A
Hello , it is 5-13 years.

1 Questions & Answers View All

Sponsored Products Related to This Item

Shipping

There are two key factors which will affect the time you receive your items.

1
Item processing time
After receiving your order,we require some time to test the product to ensure its quality.The exact processing time varies depending on the item.The average processing time is 3 working days.but this can also be affected by the item's stock status. For small quantity orders,the processing time is 1-3days while larger quantity orders may require 2-5days.
2
Shipping methods
China Warehouse:
Shipping Type Country or Region Arrive within 1-7 Days Arrive within 8-15 Days Arrive within 16-30 Days Arrive within 31-45 Days Average Time (Days)
Unregistered Air Mail or Registered Air Mail United States 0.52% 44.87% 49.88% 3.5% 18.13
Spain, United Kingdom, Italy, Germany, France & Portugal 5.18% 43.44% 48.34% 1.17% 15
Netherlands, Greece, Poland, Hungary, Slovakia, Czech Republic 2.96% 40.34% 52.54% 3.74% 18.66
Russia 0% 4.45% 84.41% 11.1% 28
Japan, Korea 0% 21.30% 68.80% 9.66% 17.75
Brazil 0% 0% 23.91% 72.09% 38.6
Turkey 0% 37.75% 59.05% 3.1% 20.33
Thailand, Singapore & Malaysia 0% 40.39% 56.12% 2.6% 16.2
Other countries 0.7% 38.79% 47.94% 8.56% 23.57
Priority Line United States 12.28% 79.05% 7.4% 0.52% 11.75
Spain, United Kingdom, Italy, Germany, France & Portugal 8.44% 66.56% 23.45% 0.45% 13.55
Russia 0% 3.48% 75.79% 20.04% 31
Brazil 2.21% 6% 61.29% 25.46% 30
Turkey 20.42% 77% 3% 0.08% 10
Australia 7.67% 86.60% 5.68% 0% 11
Korea 97.54% 1.57% 0.89% 0% 7
Japan 95.80% 2.09% 0% 0% 6.84
Thailand, Singapore & Malaysia 58.96% 41.04% 0% 0% 8.45
Other countries 22.33% 30.8% 27.62% 17.64% 18.65
Expedited Shipping ALL countries(EMS) 3.8% 46.8% 26% 15% 14.8
ALL countries(DHL) 65.8% 25.75% 3.86% 0.37% 6.72
GW Warehouse: Typically 3-5 days to the UK, 3-7 days to other European countries.
USA Warehouse: Generally, 3-7 days to a USA address.
ES Warehouse: Generally, 2-5 days to the Spain, 3-7 days to the Portugal.
Shipping from warehouse nearest to shipping address is faster. Additional charges may apply.
Note: This is a general guide and delays maybe caused force majeure, natural disasters, inclement weather, war, public holidays, and factors outside our control. Generally speaking, we offer free shipping for FULCRUM MINIBOT 1.0 to United States (US, USA), United Kingdom (UK, GB), Germany, Italy, France, Spain, Portugal, Poland, Brazil, Russia, Japan, Greece, Austria, Hungary, Slovakia, Czech Republic, Ireland, Lithuania, Israel, Denmark, Norway, Sweden, Canada, Australia, Netherlands, Korea, Turkey, Mexico, Ukraine, Romania, Columbia, Thailand, Singapore, Malaysia etc. Please choose the shipping methods for the final price.

Payment

Gearbest.com accepts PayPal,Credit Cards,Wire Transfer,Westem Union, YandexMoney,Webmoney,Boleto,OXXO and BKM as secure payment methods.

1
Paypal
The most convenient payment method in the world.
2
Wire transfer
For orders which exceed $1,500,please contact us at support@gearbest.com.
Note: please email us the order number,the amount transferred along with currency type,and the exact date of the wire transfer.
3
Western Union
Please contact us at support@gearbest.com for details.
Note: please email us the following information after you have paid via Westem Union:
· Control Number(10 digits)
· The exact amount sent along with the currency
· Name of sender.
· Address of sender
4
YandexMoney、 Webmoney
With YandexMoney and Webmoney, it is convenient and safe for you to pay via credit card、wallet or cash
5
Boleto
For Brazil customers, we accept Boleto: you only need to fill in the payment information, remember your Boleto Voucher information and pay it within 3 days at any Boleto stores.
6
OXXO
For Mexico customers, we accept OXXO: you can choose OXXO payment on our website, and then remember your OXXO Voucher information and pay it within 3 days at any OXXO stores.

Do you want to bulk buy FULCRUM MINIBOT 1.0 ? Please submit your wholesale FULCRUM MINIBOT 1.0 inquiry below. Please note we usually don’t offer free shipping on wholesale FULCRUM MINIBOT 1.0 orders, but the wholesale price will be a big bargain.

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Sign In
Pre-sale Service