Product keywords
Please enter the email address account
Tronxy 255X255X260MM XY-2 Pro 24V Quick Install 3d-printer  3.5inch Full Color Touch Screen
Share to:

Tronxy 255X255X260MM XY-2 Pro 24V Quick Install 3d-printer 3.5inch Full Color Touch Screen


Tronxy Official Store more offers push
225.99 $389.99 42% OFF
Save an extra for using the App

Scan the QR code to buy:

  • 1.Download our FREE app on Google play or App Store.
  • 2.Launch the app and scan the QR code to buy directly.

Follow the below steps:

  • 1.Sign in to
  • 2.Add product(s) marked with to your Cart.
  • 3.Open our app, and go to your Cart.
  • 4.Pay for your order for an immediate discount!
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Aug 09 - Aug 13, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Recommended for You

Youtube Video Reviews


Main Features

XY-2 PRO print size 255*255*260MM (using conventional extruder)
XY-2 PRO Titan print size 255*255*245MM (using Titan extruder, can print flexible consumables)

Tronxy XY-2 PRO description
XY-2 PRO is an incredible 3D printer for professionals and amateurs. It requires the least installation work, so you only need 5 minutes to complete the assembly. It has a high cost performance, and any DIY enthusiast can't resist it. The volume of XY-2 PRO-255 x 255 x 260mm-is designed for challenges. More importantly, there is no trouble in printing with XY-2 PRO, because these two recovery functions can prevent any defects and malfunctions caused by power failure and exhaustion of the filament. Control the process and set the parameters on the touch screen. Enjoy easier and more successful 3D printing!

main feature:
●The large volume of 255 x 255 x 260mm can print more exciting models
●Use standard 0.4mm diameter nozzle for precise printing, precise alignment, speed up to 100mm/s
●With filament exhaustion protection and power-off protection, greater success in 3D printing
●3.5-inch full-color touch screen, more intuitive control
●Quick and easy assembly, it only takes 5 minutes to get started
●Strengthen aluminum alloy structure, wear-resistant and durable
●Maximum 110 degrees heating bed temperature, maximum 275°C nozzle temperature of various filaments, such as PLA, ABS, PVA, PP, wood filling, etc.
●Automatic leveling function to improve work efficiency and easy operation

Tip: When the printing height exceeds 0.5mm, the power failure recovery function will be good. If the height is less than 0.5mm, it is recommended to print again.

●Please read and follow the user manual carefully before assembling or operating the 3D printer.
●Always use the AC voltage suitable for your area.
●Do not place the 3D printer near flammable/combustible materials or any heat source.
●Use the 3D printer only in a well-ventilated area. Keep a safe distance from the printer.
●Due to different product batches, the appearance of the rack is not adjusted much, but it does not affect the use. please inform.


Brand: Tronxy
Model: XY-2 PRO
Type: DIY
Material (frame): Aluminum
Platform board: aluminum alloy glass fiber board
Engraving area: 255 x 250 x 260mm
Number of nozzles: single
Nozzle diameter: 0.4mm
Nozzle temperature: room temperature to 275 degrees
Layer thickness: 0.1-0.4mm
Memory card offline printing: SD card
LCD screen
Printing speed: 20-100mm / s
Support material: ABS, PLA, PP, PVA, solid wood filling
Material diameter: 1.75mm
Language: Chinese, English
File format: G code, STL
XY axis positioning accuracy: 0.0125mm
Z axis positioning accuracy: 0.02mm
Voltage: 24V
Host software: Cura, Repetier-Host, Tronxy
Packing type: special custom box packing
System support: Windows / Mscos / Linux
Connector type: SD card, USB
Dimensions and weight

Product weight: 8.5000 kg
Package weight: 12.0000 kg
Product size (length x width x height): 47.80 x 45.50 x 52.00 cm / 18.82 x 17.91 x 20.47 inches
Packing size (length x width x height): 52.00 x 49.00 x 25.00 cm / 20.47 x 19.29 x 9.84 inches

Package Contents:
Package content: 1 x unassembled Tronxy XY-2 PRO 3D printer


Package Size(L x W x H)
Package Weights
Package Contents
Upper bracket,Base,Touch screen,Filament bracket,Specification,HM5*50 4PCS,Tools,Shovel ,Power line,USB cable,Sticker,Fiberglassboard,reader and SD card,Sample filament 0.25KG,0.4mm nozzle,clips,quick connector M6 ,Tie
View More

Suggested Products

Customer Reviews

4.89 out of 5
  • 17
  • 2
  • 0
  • 0
  • 0
See all 19 reviews Write a Review
  • Andreas
    Kleine Mängel
    +Die Maschine liefert im allgemeinen gute Drucke.

    ++ Alles was ich gedruckt habe, kam mit einer hohel Qualität von der Maschine.

    Doch es gab einige kleine Mängel.

    -Eines der Laufräder an der X-Führung scheint ein angeschlagenes Kugellager zu haben.
    Doch das scheint die Qualität der Drucke nicht zu beeinflussen.

    --Ein etwas größerer Mangel ist, dass die Maschine in der Z-Achse ein Spiel von etwa 0,3 mm hat.
    Das merke ich beim Z-Leveln. Wenn ich 0,1 mm schritte nach unten fahre, bis das Papier klemmt, dann muss ich mindestens 0,3 mm wieder nach oben fahren, biss es wieder leichter verschiebbar ist.

    --Die Kabel und Filamentzuführung von Extruder zum Hotend ist nicht richtig durchdacht.
    Die Maschine hat einen Arbeitsraum in der Z-Achse von 260 mm. Heute habe ich etwas Gedruckt, das 220 mm hoch war und die Kabel und Filamentzuführung schien schon zwischen der oberen verstrebung und Schlitten gefährlich gebogen zu werden.

    -Das einfädeln des Filaments durch den Sensor und dann in den Extruder, kann teilweise schwierig sein, wenn man das Filament nicht zuvor sehr gerade biegt.

    ---Der größte Mangel den ich festgestellt habe, ist die ungünstige Positionierung des unteren Kühlventilators, der die Elektronik kühlt. So dicht über der Tischplatte wirkt das wie ein Staubsauger und saugt den kleinsten Schmutz sofrt auf.

    Trotz all dieser Mängel, ist die Qualität der Maschine so hoch, dass es mir 4 Sterne wert ist.
    Beseitigt noch die kleinen Designfehler, die das Arbeiten mit der Maschine erschweren und die Lebensdauer mancher TTeile mindern und ihr werdet ein top Produkt haben.

    Aug 07,2020

  • Biker Budy
    Great printer for the Money
    Ok so let’s start out with saying this is not my first 3d printer that being said it was the easiest to put together. From the time I opened the box to the start of the first print was one hour and 20 mins. Part of that was unboxing and making sure I had everything. It took about 20-30 min to put it together. Then leveling the bed wow this has to the easiest bed I have ever leveled. Then I started the first print. Of course I pick one off the micro-SD card provided with the printer and it was a 10hr print. In this print I used the power-loss and resume feature it worked great. I also used the filament out feature and it worked great. I use the filament out feature a couple of times to change colors on the print was so easy to do. I did have a problem I had to contact tech support on and they got back to me in a couple of hours, on my other printers it would have been days or weeks so this is great.
    Prints up to 100mm/s
    Touch screen32bit control board with resume on powerloss
    Filament out detection
    Heated bed
    All metal build
    Easy to get parts for if you want to modEasy to assemble

    Jun 06,2019

  • Laurent Rouchairoles
    Great printer for the price.
    My first printer was a Delta and gosh was it a pain to assemble than get it to work. However the Tronxy is remarkably easy to assemble. There are many YouTube videos available online for people who are total newbies. For me due to my schedule it took a couple of days to get it up and running but for a beginner it should take no more than 3-6 hours.

    After the first print of traffic cone that got messed up due to some reason I started using tape on the build plate and that has worked out much better for me.

    Plenty of videos online for newbies.
    Few steps of assembly
    Touch screen - very easy and quick functioning
    Support email is responsive.
    Spare screws given.

    Instructions on the sheet aren't greatest for someone who's vanilla to 3D printing.

    I would certainly recommend this printer. Great for the price

    Jun 20,2019

  • Aidan McCarthy
    great printer, lots of fun!
    When I first ordered this 3d printer there was a mix up at the distribution center, I didnt recieve it in the mail.

    After contacting tronxy they swiftly assisted me and got another one sent out. They also included some extra filament for my troubles.

    I had a few issues with cooling the controller and when I brought this concern to their staff they sent me a small fan that cools it down.

    This printed has its little quirks but if you're willing to tinker around with it, it's a great 3d printer for the money!

    If you ever have any troubles with it shoot their team an email, I would always get a response back in about 10 minutes!
    One person found this helpful

    Jun 20,2019

  • Jason
    What an incredible value, this is my third 3d printer, the assembly was incredibly easy, the material quality is great with a solid aluminum chassis for great rigidity that holds level and true, the auto leveling and filament detection system, the removable flexible build plate.
    I can honestly say IMPRESSED, and an incredible value.
    Thanks guys this changes my whole 3d printer outlook for entry level printers that provide so much value at an affordable price. Also shipping and customer service was excellent.
    Couldn't be happier.

    Sep 01,2020

Sponsored Products Related to This Item
Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service