SparkMaker SLA UV 3D Printer

- RED EU PLUG 268267802

Creative Portable Resin 98 x 55 x 125mm
  • FREE SHIPPING Ship between: Aug 21 - Aug 24, Estimated Shipping Time: business days goods.buiness_days_tip
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer

Recommended Products for You

Customers Who Bought This Item Also Bought

Main Features
● Easy to use, suitable for UV 3D printing beginners
● Adopt 4.5 inch LCD screen scheme ( 845 x 480 resolution )
● Designed for printing small objects within 98 x 55 x 125mm
● Support offline SD card print, no connection problems
● LED indicator shows the printing status



Brand: SparkMaker
Type: Complete Machine
Print speed: 8 - 15 s/layer
Supporting material: Resin
XY-axis positioning accuracy: 0.01mm
Z-axis positioning accuracy: 0.002 mm
Voltage: 24V
Working Power: 48W
Packing Type: Assembled packing
Connector Type: SD card

Dimensions and Weight

Product weight: 2.0000 kg
Package weight: 3.0000 kg
Product size: 17.00 x 17.00 x 27.50 cm / 6.69 x 6.69 x 10.83 inches
Package size: 34.00 x 34.00 x 34.00 cm / 13.39 x 13.39 x 13.39 inches

Packing Contents

Packing Contents: 1 x 3D Printer, 1 x Cable

1. Please read the user manual carefully before installation and operation
2. Please adjust the voltage on the power supply of printer according to your local voltage
3. Keep the printer away from flammable, explosive and such objects with high heat source

Guess you like

FAQ for SparkMaker SLA UV 3D Printer

  • Can the firmware of SparkMaker SLA UV 3D Printer be upgraded?

    You can upgrade the firmware.
  • How to Clean the prints?

    The Prints should be cleaned using alcohol up to the purity up to 99%.
  • What should do if printing is interrupted?

    Remove residual adhesive on the building platform with a knife or spade and take out residual adhesive from the tank with tweezers. Remember to check the building platform and resin tank, residual adhesive will cause printing failure could damage LCD screen.
  • Is SparkMaker resin can be used in other SLA printer?

    The SparkMaker resin can be used in LCD-SLA 3D printer use PEFT film or FEP film resin tank, and its curing wavelength between 355 - 420 nm.
  • Why does the light turn red but turn green soon after when I insert the SD card and push the button to print?

    1. The SD card is not be recognized, and you need change a new SDHC card.

    2. The way or position you inserted the SD card is not right, and you should adjust the way or the position.

  • Why bottom of a model can't stick to the platform or drops out when printing?

    1. Add more bottom layer exposure time, especially for dark colored resin.(Use 200s)

    2. Leveling the platform.

  • Why are some parts of a model deformed or some characteristic disappeared?

    1. The problem area needs added support.

    2. Check the FEP film of resin tank and LCD screen, see if something shielded the UV light.

  • How to debug the heatbed of 3D printer without auto leveling?

    You can refer to the post below: How to debug 3D printer’s heating platform
  • How to stop 3D prints from warping?

    You can refer to this post: How to stop 3D prints from warping
  • How to choose the right filament?

  • How to choose a 3D printer?

  • How to using Cura 3D slicing software?

  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

  • why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

Customer Qusetions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

0 Questions & Answers View All>

Sponsored Products Related to This Item

Customer Reviews

5 goods.goods_customer
  • 3
  • 0
  • 0
  • 0
  • 0
  • Thomas
    Mini SLA 3D Printer for High-precision 3D Prints
    Color:Red Size:EU Plug
    FDM 3D printers do not produce prints with such high accuracy - the surfaces are rough. SLA printers are different, but they are much more expensive.
    The SparkMaker SLA UV 3D Printer makes SLA printing available for all. My son and I like to use it to print little toys and play with them.

    Jun 14,2018


  • Brian Smith
    Mini SLA 3D Printer
    Color:Red Size:EU Plug
    High-precision SLA printing;
    98 x 55 x 125mm build volume;
    Supports SD card printing;
    Resin filament supported.
    Summary: a nice mini SLA 3D printer

    Jun 10,2018


  • Noah
    Excellent printing quality
    Color:Red Size:EU Plug
    SLA 3D printing, 98 x 55 x 125mm build volume, offline SD card printing support great for building small things.

    Jun 07,2018


Your Recently Viewed Items

See personalized recommendations

New customer? Start here