All
Product keywords
Please enter the email address account
Alfawise U20 Plus 2.8 inch Touch Screen Large Scale DIY 3D Printer
Share to:

Alfawise U20 Plus 2.8 inch Touch Screen Large Scale DIY 3D Printer

- Black U20 Plus EU Plug
266721404

400 x 400 x 500mm Output Device
369.99 $440.35 16% OFF
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Aug 26 - Aug 28, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item

Recommended for You

Customers also shopped for

Alfawise U20 Plus is a bigger version of Alfawise U20 3D printer, the 400 x 400 x 500mm bigger printing size brings more possibilities to build bigger models with fewer limits. It is the ideal affordable desktop 3D printer for amateurs, designers, architects, design studios, small / medium-sized businesses, etc.
With the 3D prototyping, you are able to present a nearly complete product. Instead of displaying it on a computer monitor or a drawing, you can quickly bring it to life. U20 plus boasts a high cost-performance ratio and it can pay for itself very soon. Besides the features inheritance from the hot-selling U20, including power outage and filament run-out resume functions, U20 Plus has a large build volume - 400 x 400 x 500mm. It is specially designed for bigger models, perfect for architects and design studios. It requires the least effort to set up, you will be able to finish assembly in just 5 minutes, no special skills are needed.
Make prototypes by yourself, no need to worry about your idea being stolen. Control the process and set parameters on the touchscreen. Enjoy easier and more successful 3D printing!

Main Features:
400 x 400 x 500mm big build volume to print more exciting models, fewer size restrictions
● Precision printing with standard 0.4mm diameter nozzle, accurate alignment and up to 150mm/s speed
● More successful in 3D printing with filament run-out and power outage resume printing
● 100 Deg.C max. heat bed temperature, 250 Deg.C max. nozzle temperature for various filaments, such as PLA, ABS, PVA, PP, wood filled, etc.
2.8-inch full-color touchscreen for more intuitive control
● Fast and easy assembly, only 5 minutes needed to get started
● Reinforced aluminium alloy construction, wear-resistant and durable
● Automatic levelling function improving the work efficiency and easy to operate
● No trembling and low noise during printing because of the special structure design and material selection

Join the discussion, find technical support, up-to-date information, and share your experiences in the Facebook group.
Pleaseclick here to download the firmware

Tips:
● The power outage recovery functions well when you print more than 0.5mm in height. If the height is less than 0.5mm, it is recommended to print again.
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.
● Due to different batches of products, the appearance of the rack has minor adjustments but not affect of using. Please be informed.

Specification

General

Brand: Alfawise
Model: U20 Plus
Type: DIY
Engraving Area: 400 x 400 x 500mm
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: Room temperature to 250 degree
Layer thickness: 0.1-0.4mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: 20 - 150mm / s
Supporting material: ABS,PLA,PP,PVA,Wood Filled
Material diameter: 1.75mm
Language: Chinese,English
File format: G-code,OBJ,STL
XY-axis positioning accuracy: 0.0125mm
Z-axis positioning accuracy: 0.0025mm
Voltage: 24V
Host computer software: Cura
Packing Type: unassembled packing
System support: Windows / Linux / MAC
Connector Type: SD card,USB

Dimensions and Weight

Product weight: 14.1000 kg
Package weight: 18.6000 kg

Package Contents

Packing Contents: 1 x Unassembled Alfawise U20 Plus 3D Printer
Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug
Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug
Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug
Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug
Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug
Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug
Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug
Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug
Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug


Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug




Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug

Alfawise U20 Plus 2.8 inch Touch Screen Aluminium Alloy DIY Large Scale 3D Printer- Black U20 Plus EU Plug

Suggested Products

Customer Reviews

4.78 out of 5
  • 461
  • 103
  • 2
  • 1
  • 4
See all 571 reviews Write a Review
  • Levon Turaç
    Yes (7) Color: Black Size: U20 EU Plug
    Bu fiyata En Kaliteli 3D Yazıcı CREALITY CR-10 Katili resmen :)
    İlk yazıcım JGAurora A5 Modeldi. Ve o modelide deneme amaçlı almıştım. Sonrasında dedim biraz daha uygun modelleride deneyeyim. yaklaşık 1000tl daha ucuz bir yazıcı buldum ve karşıma AŞFAVISE U20 denk geldi. İlk başlarda tereddütlüydüm fakat yazıcı geldiğinde ve ilk baskıyı yazdırdığımda zaten şok oldum.
    1 ay sonra Alfawise U10 modelinide satın alacağım.:) Daha ne diyim yani.:) Detaylı baskısı videoda mevcut. Videomu youtube dan açıp izlerseniz görebilirsiniz. Ve almak isteyen olursa video altındaki bağlantı üzerinden alırsa çok sevinirim.

    Kademe kademe anlatmak gerekirse:
    1- Kaliteli metal profile sahip ve hiç titreşim yapmıyor. (En çok korktuğum noktaydı )
    2- Montajı kolaydı (Kablolama kısmında biraz karşık gelebilir ama aslında bilen için çok basit. Fakat yeni alanlar yarım saat uğraşabilir :)
    3- Isıtmalı tabla olması çok iyi hatta diğer şık hemen altta :)
    4- Isıtmalı tablanın cam değişimi dahada iyi. Diğer yazıcılarda malesef cam ile ısıtma yüzeyi yapışık oluyor ve bu sebeple değişimi çok sıkıntılı ama bunda öyle değil.
    5- Cam tabla yüzeyi gerçekten çok iyidi. Kalitesiz dursada baskı alınca filamentin yapıştığını görünce sizinde fikriniz değişebilir. :)
    6- Filament sensörü olması da gerçekten büyük artı. Çünkü bundan pahalı olan creality markasında o yok şahsen.
    7- Filament bittiğinde veya değiştirmek gerektiğinde baskı kaldığı yerden devam edebiliyor. Creality cr-10 modelinde o özelli YOK :)
    8- Extruder küçük görünse bile işini çok iyi yapıyor.
    9- Nozzle Isınma süresi gayet hızlı 20-30 saniye gibi kısa bir sürede nozzle baskıya hazır ısıda oluyor. Tabla daha geç ısınıyor.
    10- Z Ekseni yüksekliğinin 40cm olması zaten bu fiyata muazzam ötesi. Bundan daha pahalıya satılan creality de 30cm malesef. Güncellenmiş versiyonu bununla aynı ölçüde fakat oda bundan 1000 tl daha pahalı.
    11- Yüksek çözünürlüklü baskı alabilmeside çok iyi. İlk baskı 0.2mm ile denedim ikinci baykuş baskısını 0.1mm de bastı ve muazzam ötesi kaliteli ve hızlıydı.
    12- Güncelleme ile 0.05mm çözünürlüğe kadar baskıya müsaade ediyor. Hatta eğer uğraşırsanız daha altında bile baskı verebilir.
    13- Dokunmatik kontrol paneli işte en büyük artısı. Kolay kullanım arayüzü ve sorunsuz ayarlama imkanı sağlıyor. Creality de dokunmatik özelliğide yok :)
    14- Tabla ayarı çok rahat ve kolaydı. Dokunmatik ekranda gerekli leveling ayarını yapabiliyorsunuz ve tablanın altına eliniz rahatça girebiliyor.
    15- tek Z Ekseni motoru olmasına bakmayın. Bende ilk baş çok şüphe ettim çünki JGaurora da dual z eksen motoru mevcuttu ve memnundum. Ama bunda hiç bir sıkıntı yok. O konudada beni çok şaşırttı.
    16- Nozzle ve Filament soğutmasıda cidden JGaurora dakinden daha iyiydi.
    17- Z Eksen milini tavan kısmına sabitlemeleri zaten baskı kali
    Suggestion
    Aslında çok aşırı eksiği yok. Ki bunlar bu fiyata eksi çzellik olarak değerlendirilmez. Fakat yinede yazalım.

    1- Dual Z step motoru olursa çok daha iyi olur.
    2- Kablo karmaşasısnı biraz daha düzenlemeleri gerekli.
    3- Kabloları biraz daha uzun yapmış olsalar daha iyi olurdu. Ki kullanıcılarında kablo düzeni yapması kolay olabilirdi.
    4- Fiyatı biraz daha arttırıp BL-TOUCH sensörü eklerlerse eğer mükemmel olur. Çünkü artık her yazıcıda Auto level yani Otomatik tabla ayarı olması gerekli diye düşünüyorum.

    Fakat dediğim gibi bu fiyata Creality cr-10 KATİLİ :) Creality bildiğiniz çöp arkadaşlar. Çok satıldı diye havalandılar ve fiyatları çok aşırı pahalandı. İlk başlarda ucuzdu ama şuan hiç değmez.

    Jul 01,2018

  • mark
    Yes (5) Color: Black Size: U20 US Plug
    alfawise u20. it's worth your money.
    I started off with a small printer, to learn how these work before going for larger print volumes.. the u 20 IS THE LARGER PRINT VOLUME. it was easy to assemble, had it together in about 20 minutes. the packaging was great, everything was secured in the box well. I joined the facebook group alfawise u20 and I believe everyone purchasing this printer should, as updates are offered for download to keep your system updated when new things are added... I've had no negative issues with the printer, the heated bed works well and warms quickly.

    I had my first storm power outage and the power resume worked as intended. it simply warmed up the hot end, homed the x and y and continued printing.. that's awesome..

    I would print a spool holder for it as the one provided has trouble with full sized spools of plastic. it works well for the provided spool though..

    I cannot wait to really get some hours under this printers belt and watch the great things it prints for me... I love movie props and statues, so this bed size is going to be fully taken advantage of...

    this is a great printer and the price is nice. join the facebook group, take advantage of the updates and learn from the other nembers, maybe I'll see you there..

    Sep 06,2018

  • Irene
    Yes (1) Color: Black Size: U20 US Plug
    A gift for my son's admission to his favorite university
    My son had asked me to buy an open-frame FDM 3D printer for him, because he loves 3D printing lessons and feels proud of his 3D-printed models. They are something extraordinary. After the admission, I though it might help with his major in the university. Now that my son is interested in 3D printing, he can keep himself occupied before the beginning of the new semester and studied a lot of knowledge. After several long hours prints (about 2 - 3 days), he gave a positive review and put it online.
    According to him, the nozzle will not be clogged and the printing quality is great when the extruder is working at a high speed. Indeed, the details of the models he made are fascinating. What he likes the most is the combination of printing directly from Micro SD card, filament run-out protection and power cutoff protection. Because 3D printing takes much longer time, these three features help to avoid any possible imperfection and restart.
    He thought the problems are not a big deal and many can be easily fixed. For example, he replaced the cooling fan, and ignored the scratches on the gantry caused during the shipment.

    Jun 15,2018

  • Henry
    Yes (0) Color: Black Size: U20 US Plug
    Competitive Large Build Volume 3D Printer
    I waited 2 days to get my first print which takes up the full size of 30 x 30 x 40cm. It is incredibly perfect. Certainly, there exist some noise which is unavoidable for FDM printers. The better the filament you use, the higher printing quality will be. It takes me only 6 minutes to finish connecting the frames and the cables, although I did not have a look at the instruction. This is because there are labels at the end of the cable, so what you need to do is only to match them. It is easy and time-saving! I also like inserting a TF card to print, so I do not need to keep the computer operating for tens of hours.
    As to its disadvantages, the 3D printer had not been packed well, although everything inside is intact. Different parts needed to be separate apart. Evidently, this is something that you should think highly of.

    Jun 05,2018

  • juan carlos rueda
    Yes (0) Color: Black Size: U20 EU Plug
    La mejor impresora calidad/precio actual!
    -Toda la impresora esta construida con piezas metalicas, lo que le da una gran consistencia.
    -Un solo motor en Z, por lo que se evitan desincronizaciones!
    -Electrónica de 32bits con fuente de 24v y pantalla tactil. Electrónica aislada de la impresora.
    -Extrusor de corta distancia, con ventilador de capa incorporado.
    -La cama caliente viene con una plancha de adhesión para las piezas impresas, estilo buildtak.
    -Ruedas Vslot en todos los ejes, por lo que tiene una gran suavidad de movimiento.
    -El extrusor viene ya modificado con un sensor de filamento. Filamento en un soporte para poner encima de la mesa.
    -Viene totalmente equipada, con herramientas, una bobina de 200gr de pla de regalo y una aguja para desatascar el nozzle.
    Suggestion
    -La unica contra es que el firmware es cerrado, a la espera de que se libere.

    Jun 29,2018

FAQ for Alfawise U20 Plus 2.8 inch Touch Screen Large Scale DIY 3D Printer

  • What is the difference between U20 and U20 Plus?

    In order to meet the needs of more people, we developed the U20 Plus. The U20 Plus has a larger print size of 40 x 40 x 50cm. It is more suitable for printing architectural models.
  • Will the U20 Plus 3D printer be unstable when it hits a high point?

    We have redesigned the U20 Plus's large size and large size. We use thickened structural members to optimize the overall structure and increase the stability and non-jitter design. Please feel free to use it.
  • What if there is damage?

    We have considered various situations during the design. Both the U20 and U20 Plus are equipped with a nozzle anti-blocking and anti-corruption design. The motherboard has a safety fuse that prevents burnout. If you accidentally broke the nozzle board or other parts due to incorrect operation, you can purchase the parts replacement separately from our website. Our technical support will help you all the way.
  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

    The solution to under-extrusion (not extruding enough plastic)

  • Why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

    The detail you can read this post:

    Solutions to holes and gaps on the top surface during 3D printing

  • How does 3D printer work?

    In fact, although there are many different brands of 3D printers, they all basic working principle is same: How does 3D printer work?
  • How to debug the heatbed of 3D printer without auto leveling?

    There are many 3D printers that do not have automatic leveling,the platform leveling is very important. Let's talk about how to debug heating platform: How to debug 3D printer’s heating platform
  • How to stop 3D prints from warping?

    When using a 3D printer, the first layer always fails to print, and warps when print several layers. It is really make people desperation, this post will help you to fix the problem: How to stop 3D prints from warping
  • How to choose the right filament?

    When choosing a proper 3D printer filament, we need to consider the different features of its materials:

    Pick the right 3D printer filament

    3D printer filament comparison

  • How to choose a 3D printer?

    We take a look at the key factors to consider when purchasing a 3D printer: 7 things you need to know before buying a 3D printer
  • How to using Cura 3D slicing software?

    Cura is an open source 3D printer slicing application, it is widely used in 3D printing. Let's talk about how to install Cura 3D slicing software and operate it: Cura 3D slicing software installation and operation
  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

  • How to deal with the 3D printer nozzle jam?

    We will introduce a couple of single steps to help you dealing with this problem: How to deal with the 3D printer nozzle jam
  • How to solve cracking or breaking of layers during 3D printing

    We will discuss some typical reasons and corresponding solutions: How to solve cracking or breaking of layers during 3D printing
  • Why 3D printer details can not be printed out?

    There are several options that allow you to successfully print this subtle detail: Why 3D printer details can not be printed out?
  • I want to print a large object, which 3D printer is better for me?

    We recommended the TEVO Black Widow 3D Printer Kit, because of it's large printing area (up to 370 x 250 x 300mm).

    The detail tips for choosing a 3D printer, you can read this post:

    3D Printer buying guide
  • How to make my 3D-printed models look smooth and shining?

    Acetone Vapor is an easy way to smooth your ABS prints. Please check the specific steps in this guide:

    Acetone Vapor - A great way to make your 3D-printed models look smooth and awesome

  • View More

Customer Q&A

  • All(17)
  • Product Information(15)
  • Stock Status
  • Payment
  • About Shipping(1)
  • Others
Q

Hi, what is the inner and outer diameter of the PTFE tube ?

By Antoine May-02/2019 18:42:33

A

Hello Antoine,

The inner and outer diameters of the PTFE tube are 2mm and 4mm respectively (for consumables of 1.75mm)

Q

Is this printer can work with SolidWork software? if not, do i be able to tranfer my SolidWork files that i already made to work with this printer?

By Eli Apr-15/2019 23:43:09

A

Hello Eli,

Can not be used directly, SolidWorks output 3D files need to be converted into STL format files, then import STL files into cura, set parameters and save as gcode files, gcode files can be read and printed by the printer, you can refer to the following video :


https://www.youtube.com/watch?v=zF46WFT8ewI&t=299s


https://www.youtube.com/watch?v=lc-NJaAZQVQ


Q

Can it really do 150mm/s printing speed? Peut-il vraiment faire une vitess de 150mm/s?

By Mike Apr-11/2019 17:33:05

A

Hello Mike,
Print speed: 20 - 150mm / s 

Yes,it is.

Let me know if you need any help.

Q

Motherboard type please !

By Dany Jan-15/2019 13:21:36

A

Hello Dany,

The U20's motherboard is specifically designed for the U20.

Chip is STM32F103 series.


Q

What is the print speed? What is the software it uses? Warranty and part availability?

By frank Dec-15/2018 14:23:13

A

Hello Frank,

1. Precision printing with standard 0.4mm diameter nozzle, accurate alignment, and up to 150mm/s speed

2. Host computer software: Cura,Repetier-Host 

3. Please see our warranty website: http://www.gearbest.com/about/warranty-and-return.html

4. It is availabel. You can place the order now.

Q

hello is it possible to ship the item to Syria? thanks

By nasser Nov-25/2018 13:01:33

A

Hello Nasser, 
We sent this item to Syria. You can add the item to your cart first.

Q

Is it possible to put a lower price in the shipping ticket? To reduces taxes

By carlos alberto avila guzman Nov-23/2018 05:59:54

A

Hello Carlos,


According to customs regulations, we can not declare a lower invoice amount or declare the item as a gift.

Unfortunately, we have no control over these regulations and potential import duties.


To know more about the tax, consult our F.A.Q and the terms and conditions in the links below:

http://www.gearbest.com/about/faq.html (See Taxes and Fees)

http://www.gearbest.com/about/terms-and-conditions.html


Q

But it also says in the pictures: Assemble it in 5 minutes...I really need to know if it will take me 5 minutes or 15 hours.

By paz Nov-17/2018 06:42:48

A

Hello Paz, 

Thank you for your inquiry.

Fast and easy assembly, only 5 minutes needed to get started.

Q

I don't understand if the printer is already preassembled (only a few minutes to assemble all the elements) because it says DIY in the description...do I have to assemble it from scratch?

By paz Nov-15/2018 22:36:43

A

Hello paz, 

Packing Contents: 1 x Unassembled Alfawise U20 3D Printer

   


Q

Can I upgrade the board, by putting another drivers?

By mic Nov-08/2018 20:36:17

A

Hello Mic,


We are sorry that we can only upgrade the firmware via the sd card.

Let me know if you need any further assistance. 


Q

Hi, what is the inner and outer diameter of the PTFE tube ?

By Antoine May-02/2019 18:42:33

A

Hello Antoine,

The inner and outer diameters of the PTFE tube are 2mm and 4mm respectively (for consumables of 1.75mm)

Q

Is this printer can work with SolidWork software? if not, do i be able to tranfer my SolidWork files that i already made to work with this printer?

By Eli Apr-15/2019 23:43:09

A

Hello Eli,

Can not be used directly, SolidWorks output 3D files need to be converted into STL format files, then import STL files into cura, set parameters and save as gcode files, gcode files can be read and printed by the printer, you can refer to the following video :


https://www.youtube.com/watch?v=zF46WFT8ewI&t=299s


https://www.youtube.com/watch?v=lc-NJaAZQVQ


Q

Can it really do 150mm/s printing speed? Peut-il vraiment faire une vitess de 150mm/s?

By Mike Apr-11/2019 17:33:05

A

Hello Mike,
Print speed: 20 - 150mm / s 

Yes,it is.

Let me know if you need any help.

Q

Motherboard type please !

By Dany Jan-15/2019 13:21:36

A

Hello Dany,

The U20's motherboard is specifically designed for the U20.

Chip is STM32F103 series.


Q

What is the print speed? What is the software it uses? Warranty and part availability?

By frank Dec-15/2018 14:23:13

A

Hello Frank,

1. Precision printing with standard 0.4mm diameter nozzle, accurate alignment, and up to 150mm/s speed

2. Host computer software: Cura,Repetier-Host 

3. Please see our warranty website: http://www.gearbest.com/about/warranty-and-return.html

4. It is availabel. You can place the order now.

Q

hello is it possible to ship the item to Syria? thanks

By nasser Nov-25/2018 13:01:33

A

Hello Nasser, 
We sent this item to Syria. You can add the item to your cart first.

Q

But it also says in the pictures: Assemble it in 5 minutes...I really need to know if it will take me 5 minutes or 15 hours.

By paz Nov-17/2018 06:42:48

A

Hello Paz, 

Thank you for your inquiry.

Fast and easy assembly, only 5 minutes needed to get started.

Q

I don't understand if the printer is already preassembled (only a few minutes to assemble all the elements) because it says DIY in the description...do I have to assemble it from scratch?

By paz Nov-15/2018 22:36:43

A

Hello paz, 

Packing Contents: 1 x Unassembled Alfawise U20 3D Printer

   


Q

Can I upgrade the board, by putting another drivers?

By mic Nov-08/2018 20:36:17

A

Hello Mic,


We are sorry that we can only upgrade the firmware via the sd card.

Let me know if you need any further assistance. 


Q

which one filament i can use? and please give me link or name

By Anatolii Oct-10/2018 18:44:07

A

Hello Anatolii, 

The material name is PLA.

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Q

Is it possible to put a lower price in the shipping ticket? To reduces taxes

By carlos alberto avila guzman Nov-23/2018 05:59:54

A

Hello Carlos,


According to customs regulations, we can not declare a lower invoice amount or declare the item as a gift.

Unfortunately, we have no control over these regulations and potential import duties.


To know more about the tax, consult our F.A.Q and the terms and conditions in the links below:

http://www.gearbest.com/about/faq.html (See Taxes and Fees)

http://www.gearbest.com/about/terms-and-conditions.html


Be the FIRST to Ask a question. Want G Points? Just Write a Review!

17 Questions & Answers View All

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service