Alfawise U30 2.8 inch Touch Screen DIY Desktop 3D Printer
Share to:

Alfawise U30 2.8 inch Touch Screen DIY Desktop 3D Printer

- BLACK EU PLUG 342625701

220 x 220 x 250mm Build Volume Filament Run-out Detection Power Outage Resume Function
179.99 $245.99 Discount : 27% OFF
  • FREE SHIPPING Ship between: Dec 19 - Dec 21, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer Repair Warranty Report item
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought

Description:
Alfawise U30 is an incredible 3D printer designed for professionals and amateurs alike. It trains hands-on ability, and only 1 hour is required to finish the assembly. It boasts high cost-performance ratio - any DIY enthusiast will not be unable to resist. U30 has a large build volume - 220 x 220 x 250mm for most challenges. More importantly, printing with Alfawise U30 is hassle-free because the two resume functions prevent any imperfection and failure due to power outage and filament run-out. Control the process and set parameters on the touchscreen. Enjoy easier and more successful 3D printing!

Main Features:
0.1 - 0.4mm precision printing
With standard 0.4mm diameter nozzle, accurate alignment, and up to 120mm/s speed
Filament run-out protectionandpower outage protection
More successful 3D printing, 100 percent completion on every print
2.8'' full color touchscreen
The display can be installed on the left or right side to provide more intuitive control, especially great for the left-handed
Built-in power supply, under the build platform to avoid the electric shock
Quick assembly only 1 hour needed
Great for any beginners to train hands-on ability
● Reinforced aluminum alloy construction, durable, in classical black and red colors
● Powerful heat bed using safety voltage for fast heating. With heat-resistant heat bed sticker, easier to use and clean
● 100 Deg.C max. heat bed temperature, 250 Deg.C max. nozzle temperature for various filaments, such as PLA, ABS, wood filled, etc.

Pleaseclick here to download the user manual, and click here to download the firmware
Join the discussion, find technical support, up-to-date information, and share your experiences in the Facebook group

Tip: the power outage recovery functions well when you print more than 0.5mm in height. If the height is less than 0.5mm, it is recommended to print again.

Reminder:
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.

Specification

General

Brand: Alfawise
Type: DIY
Model: U30
Engraving Area: 220 x 220 x 250mm
Frame material: Aluminum Alloy
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: Room temperature to 250 degree
Layer thickness: 0.1-0.4mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: 120mm/s (max.), 30 - 70mm/s ( recommended )
Platform temperature: Room temperature to 100 degree
Supporting material: ABS,PLA,Wood Filled
Material diameter: 1.75mm
File format: G-code,OBJ,STL
XY-axis positioning accuracy: 0.0125mm
Z-axis positioning accuracy: 0.0025mm
Voltage: 24V
Host computer software: Cura,Repetier-Host,Simplify3D
Packing Type: unassembled packing
System support: Windows / Mac / Linux
Connector Type: TF card,USB

Dimensions and Weight

Product weight: 7.8000 kg
Package weight: 8.6000 kg
Product size: 42.50 x 40.20 x 50.50 cm / 16.73 x 15.83 x 19.88 inches
Package size: 46.70 x 41.20 x 18.70 cm / 18.39 x 16.22 x 7.36 inches

Packing Contents

Packing Contents: 1 x 3D Printer Kit ( Semi-assembled ), 1 x English Manual
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug


Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug




Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug


Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black EU Plug

Notice:
1. Please read the user manual carefully before installation and operation
2. Please adjust the voltage on the power supply of printer according to your local voltage
3. Keep the printer away from flammable, explosive and such objects with high heat source

Guess you like

Customer Reviews

5 out of 5
  • 14
  • 0
  • 0
  • 0
  • 0
See all 14 reviews Write a Review
  • Karl
    The best budget FDM 3D printer
    I bought Alfawise U30 after comparing all the 3D printers that I can afford on Gearbest, and I thought highly of the resume functions that other printers didn't have. My old 3D printer doesn't have the resume functions, I left my prints unattended and found a mess many times. It was too difficult to save them so I quitted for a while until I installed a camera and WiFi controller to it. They cost me about $50, but the problem is that I also need to check the process from time to time. In comparison, the filament detector and the memory function are fantastic, a perfect solution to the problems that might occur. The build size of U30 is 220 x 220 x 250mm, enough for most projects, with these resume functions, the value of U30 is higher than the price. I found the tutorials on YouTube about assembling Alfawise U30, and followed it step by step. The assembly is not difficult at all. But it took me about twenty minutes to unbox and check the parts included.

    Dec 01,2018 04:21:13

  • Henry_0m
    I've been following U20 and the Facebook group for a while...
    I've been following U20, and the Facebook group on which many people show their printed models and get technical support. When the group name was added '&U30', I was trying my best to find out what is the difference between this two 3D printer. I bought U30 on the very first day when it was on sales, and received it three days ago.U30 and U20 differ in the price and time required in assembly. Not very much difference for me in other aspects. In other words, U30 is like another version of U20. I really appreciate the new 3D printer, it has a smaller build volume, but with advantageous features, including the color touch screen and useful resume functions. The printing quality is as the same as that of U20 with the same motor, motherboard, cooling fan, extruder...I believe U30 is much better than all its competitors and I've already recommended it to all my friends interested in 3D printing.

    Dec 03,2018 04:27:31

  • Pierre
    Amazing performance, low price, and good service
    The videos are helpful for me to know the product. I've already seen some people discuss the new printer on the supportive Facebook group of Alfawise 3D printers. My first impression about Alfawise U30 is that the 3D printer is attractive, easy to build, and of excellent quality, and convenient to use. It does not disappoint me at all. I use Alfawise U20 when I need to print big models, and use Alfawise U30 when small ones are needed. The latter works as well as the former, and they are of the same quality, both are great! I am sure it will be more popular than Alfawise U20, because of the price. However, the main difference between the two printers is that a man cannot assemble U30 in about 10 minutes. I managed to do it within an hour, which is great.

    Dec 06,2018 04:23:42

  • coco
    Mon bon assistant, cette imprimante 3D de qualité!
    J'ai souvent besoin de l'impression 3D dans ma vie. J'ai appris par des amis que l'imprimante d'Alfawise était bonne, j'en ai commandé un en ligne. Permettez-moi de parler de ma première impression de cette imprimante 3D: son apparence est très simple, sa couleur me convient parfaitement, elle a l’air très solide et doit pouvoir être utilisée longtemps. De plus, j'ai trouvé que cette imprimante était très facile à installer, et il m'a fallu moins d'une heure pour l'installer. En ce qui concerne l'opération, je me sens très bien à utiliser. J'ai essayé d'imprimer une petite fleur et le résultat était très bon. Mes enfants l'aiment beaucoup. Il semble que je n'ai pas à m'inquiéter du travail manuel des enfants à l'avenir. En un mot, j'aime beaucoup cette imprimante et la recommande à tout le monde!

    Nov 27,2018 06:40:13

  • Emile
    Alfawise U30 is to be another best-selling 3D printer
    It is wonderful to get Alfawise U30 at the end of 2018. Although the printer cannot build as big as U20, it has all the features I want, and I am satisfied with the precision printing, 0.1mm layer with 0.4mm nozzle. The touchscreen can be installed on the left side, which is great! I can operate it with my left hand. Indeed, more convenient for the left-handed! I really like the user interface, silky operation, and want to have the touchscreen on other printers! By the way, the firmware is on the TF card that comes with Alfawise U30.

    Dec 05,2018 04:22:14

  • Wolfgang
    Daumen hoch! :)
    Die Lieferung des Alfawise U30 ging sehr schnell von statten. Der Aufbau selbst ist sehr leicht und machte keine Probleme. Das Leveln des Hotbed ist auch sehr angenehm und ging auch recht zügig dahin. Ich habe die ganze Prozedur 5x gemacht, um ein sauberes Ergebnis zu erzielen.Was mir sehr gefällt ist auch die Filament Halterung. Das Touch Panel ist sehr gut zu bedienen und reagiert wunderbar auf die Eingaben. Aktuell drucke ich mit PLA und experimentiere noch etwas mit den Einstellungen. erster Testdruck waren die Testeulen :P die sehr schön geworden sind.Prinzipiell habe ich nichts auszusetzen. Ich bin vollkommen zufrieden mit dem Gerät. Daumen hoch! :)

    Nov 03,2018 05:34:39

  • SIMONE
    For the science class
    3D printing is hot in every school, and children are very interested in it. Alfawise U30 allows them to learn everything from scratch, how to build, model, set the parameter, print... The size is smaller, but it is perfect for the desk. It is more budget-friendly, so we’re planning to buy more, so everyone has the same opportunity to learn better. The technical support on Facebook is soooooo great! I hope my students will ask more questions about it and improve their skills.

    Dec 05,2018 04:25:39

  • Pilar
    Muy buena calidad
    Quería tener mi primera impresora 3D, y esta era perfecta según todas las críticas. Bajo coste, facil montaje, buena calidad de impresión. Estoy encantado con el funcionamiento de ésta impresora, se consiguen unos excelentes resultados, de muy buena calidad teniendo en cuenta que se trata de una impresor en el entorno de precio bajo. La capacidad de interrumpir y volver a reanudar la impresión, así como la cama caliente son detalles de impresoras mucho más caras, y la calidad de los resultados de las piezas impresas es también muy sorprendente. Totalmente recomendable.

    Nov 26,2018 06:49:46

  • Andreas Spitzer
    Für uns perfekt
    Wie jeder andere haben wir uns durch die Bewertungen geklickt. Es waren zahlreiche, weitaus teuere Druckerdabei, aber uns gefielen die Bewertungen für den Alfawise U30 am besten. Um es kurz zu machen: Installation, Einrichten bis zum ersten Druck etwa 30 Minuten, dann Druck über 15 Stunden und das Ergebnis konnte gleich zum Kunden.Für uns perfekt und hat auf jeden Fall 5 Sterne verdient. Wir warten jetzt natürlich auf den A9 :o)

    Dec 01,2018 06:35:17

  • Michela
    Ottima Qualità
    Ottimo rapporto qualità prezzo. Ottima assistenza pre acquisto e post acquisto. Possibilità di trattare da subito vari materiali come i più utilizzati PLA e ABS o meno utilizzati come carbonfill Woodfill e altri. Il montaggio risulta semplice e la stampante funziona subito senza problemi. La struttura è abbastanza rigida e tutte le parti mobili scorrono facilmente.

    Dec 02,2018 06:36:21

FAQ for Alfawise U30 2.8 inch Touch Screen DIY Desktop 3D Printer

  • How to update the firmware of Alfawise U30 DIY 3D Printer?

    1. Copy firmware to the SD card;

    2. Then restart the machine and wait for the machine progress bar to complete before the firmware is refreshed.

    3. Then the user needs to delete firmware in the SD card to be used normally, otherwise the firmware will be refreshed every time the printer is turned on.

  • What if the filament does not discharge from the machine?

    1. After the machine nozzle is heated, the consumables are normally fed into the feeding mechanism by hand, and then passed through the Teflon tube to enter the nozzle.

    2. When it is found that the gear of the feeding mechanism emits a "beep" sound, it can first check whether the consumables are wound, causing the extrusion mechanism to pull the material.

    3 If this is not the reason, raise the machine nozzle and use the 0.4mm needle in the toolbox to insert it from below the copper nozzle and rotate while inserting.

    4. Under normal circumstances, this needle can be used to open the copper nozzle, so that the feed is smooth. The reason for this blocking is generally that there are impurities in the consumables, which leads to plugging.

  • When the machine returns the filament, it can't be returned. What should I do when stuck in the pneumatic joint?

    1. Before returning the material, please heat the nozzle first, and then withdraw the consumables as soon as possible. If you can't pump it, you can re-feed the material with the advanced material, and melt the extruded block formed at the end of the consumable in the nozzle.

    2. When withdrawing the consumables, before the end of the consumables reaches the pneumatic joint, we will usually pull the Teflon directly from the Teflon and cut the end of the consumables.

    3. Because the end of the consumables in the nozzle will be deformed by heat, if the end deformed consumables are directly pulled out, it may be stuck to the pneumatic joint or the limit switch for damage detection. (The limit switch for the broken material detection is single Towards).

  • What should I do if I cannot resume printing after power shutdown?

    If the power is suddenly turned off when the part is first printed, the machine will not save the print data. Unless the height of the print exceeds 0.5mm, the power failure will be supported. If the height is less than 0.5mm, it is recommended to reprint directly.
  • When the machine is leveling, the nozzle moves to the left, it can be leveled normally. When the nozzle moves to the right, it is found that the distance between the nozzle and the heated bed are very far or very close. If the spring is adjusted to the extreme position, it still cannot be leveled.What should I do?

    If this happens, the X-axis beam is generally loose. At this time, the hex socket on the right side of the machine can be adjusted with a wrench to adjust the tightness.
  • After the machine heats up, the filament is discharged normally. However, when the printing is performed for the first time, the curling occurs on the platform. After printing several layers, the filaments get out of the platform. What can I do?

    1. After the user gets the 3D printer, if the leveling is found to be curled on the first layer of silk, it feels like it is gently falling on the platform. It can be judged that the leveling is not adjusted, and the nozzle is too high from the hot bed.

    2. At this point we need to re-level, the quality of the leveling can largely determine the success rate of the part printing.

    3. In addition, in order to ensure good contact between the model and the platform, we can set the larger plane of the model face down when slicing, and can also be set in the slicing software to add Raft to the model, which can make the model stick to the platform firm.

  • How does 3D printer work?

    You can find answer here: How does 3D printer work?
  • How to debug the heatbed of 3D printer without auto leveling?

    You can refer to the post below: How to debug 3D printer’s heating platform
  • How to stop 3D prints from warping?

    You can refer to this post: How to stop 3D prints from warping
  • How to choose the right filament?

  • How to choose a 3D printer?

  • How to using Cura 3D slicing software?

  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

  • why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

  • How to deal with the 3D printer nozzle jam?

    You can refer to this post: How to deal with the 3D printer nozzle jam
  • How to solve cracking or breaking of layers during 3D printing

  • Why 3D printer details can not be printed out?

  • View More

Customer Questions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

0 Questions & Answers View All>

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here