All
Product keywords
Please enter the email address account
Alfawise U30 2.8 inch Touch Screen High Precision DIY Desktop FDM 3D Printer
Share to:

Alfawise U30 2.8 inch Touch Screen High Precision DIY Desktop FDM 3D Printer

- Black U30 EU Plug
342625701

Easy to Operate, Medium Color Touch Screen; Safe to Use, Power Outage Resume, Filament Run-out Protection
205.99 $291.18 29% OFF
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Jul 16 - Jul 18, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance
Recommended for You
Customers also shopped for

Alfawise U30 Youtube Video Reviews

Alfawise U30 Descriptions

Description:
Alfawise U30 is an incredible 3D printer designed for professionals and amateurs alike. It trains hands-on ability, and only 1 hour is required to finish the assembly. It boasts high cost-performance ratio - any DIY enthusiast will not be unable to resist. U30 has a large build volume - 220 x 220 x 250mm for most challenges. More importantly, printing with Alfawise U30 is hassle-free because the two resume functions prevent any imperfection and failure due to power outage and filament run-out. Control the process and set parameters on the touchscreen. Enjoy easier and more successful 3D printing!

Main Features:
0.1 - 0.4mm precision printing
With standard 0.4mm diameter nozzle, accurate alignment, and up to 120mm/s speed
Filament run-out protectionandpower outage protection
More successful 3D printing, 100 percent completion on every print
2.8'' full color touchscreen
The display can be installed on the left or right side to provide more intuitive control, especially great for the left-handed
Built-in power supply, under the build platform to avoid the electric shock
Quick assembly only 1 hour needed
Great for any beginners to train hands-on ability
● Reinforced aluminum alloy construction, durable, in classical black and red colors
● Powerful heat bed using safety voltage for fast heating. With heat-resistant heat bed sticker, easier to use and clean
● 100 Deg.C max. heat bed temperature, 250 Deg.C max. nozzle temperature for various filaments, such as PLA, ABS, wood filled, etc.

Pleaseclick here to download the user manual, and click here to download the firmware
Join the discussion, find technical support, up-to-date information, and share your experiences in the Facebook group

Tip: the power outage recovery functions well when you print more than 0.5mm in height. If the height is less than 0.5mm, it is recommended to print again.

Reminder:
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.

Specification

General

Brand: Alfawise
Model: U30
Type: DIY
Material (Frames): Aluminum
Platform board: Aluminum Base
Engraving Area: 220 x 220 x 250mm
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: Room temperature to 250 degree
Layer thickness: 0.1-0.4mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: 120mm/s (max.), 30 - 70mm/s ( recommended )
Platform temperature: Room temperature to 100 degree
Supporting material: ABS,PLA,Wood Filled
Material diameter: 1.75mm
File format: G-code,OBJ,STL
XY-axis positioning accuracy: 0.0125mm
Z-axis positioning accuracy: 0.0025mm
Voltage: 24V
Host computer software: Cura,Repetier-Host,Simplify3D
Packing Type: unassembled packing
System support: Windows / Mac / Linux
Connector Type: TF card,USB

Dimensions and Weight

Product weight: 7.8000 kg
Package weight: 8.6000 kg
Product size (L x W x H): 42.50 x 40.20 x 50.50 cm / 16.73 x 15.83 x 19.88 inches
Package size (L x W x H): 46.70 x 41.20 x 18.70 cm / 18.39 x 16.22 x 7.36 inches

Package Contents

Packing Contents: 1 x 3D Printer Kit ( Semi-assembled ), 1 x English Manual
Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug
Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug
Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug
Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug
Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug
Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug
Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug
Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug
Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug


Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug




Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug

Alfawise U30 2.8 inch Touch Screen High Precision DIY FDM 3D Printer - Black U30 EU Plug

Notice:
1. Please read the user manual carefully before installation and operation
2. Please adjust the voltage on the power supply of printer according to your local voltage
3. Keep the printer away from flammable, explosive and such objects with high heat source

Suggested Products

Customer Reviews

4.71 out of 5
  • 452
  • 145
  • 3
  • 1
  • 5
See all 605 reviews Write a Review
  • M**k
    Yes (1) Color: Black Size: U30 EU Plug
    Budget Alfawise U30 3D Printer
    I absolutely love it. It came super fast, the package is very good. It comes semi-assembled. there are printed assembly instructions but they are not always clear, so I recommend to use the instructions that come on TF card with the printer - there are photos of the assembly process. Also there are a lot of videos on youtube. The quality is very fine, rigid aluminium frames, glass stage with teflon(?) layer, good quality motors and pooleys. Everything comes in its' place and I succeeded to assemble it with my son in an hour or so. It comes with a piece of PLA filament so I was able to test it and calibrate settings. Touch screen is super convenient and user interface is very neat and clear. It is very quiet during the work. I suppose that printing volume is ok for home needs. TF card slot located on the back so it is less approachable, but this can be easily tweaked. During the work it generates vibrations a little so better to put it on very steady surface. It's really fun. Print quality is good, extruder and loader work smooth. Bottom line: I think it is very good value for its price.

    Jul 19,2019

  • James
    Yes (4) Color: Black Size: U30 US Plug
    Good Printer
    I really like this Printer, it worked right out of the box after about 30 minutes to assemble, mostly took this long because I wanted to make sure everything was right. I have had this printer for about a month now and so far so good. I like how easy it is to use, the bed level feature works pretty well. The one thing I did not like was the existing bed cover, everything stuck too well and would not come off, I tried heating it up a little and it did not help eventually i ruined it by trying to scrape too hard so I ordered some new plate covers after printing on plain glass, and now everything sticks perfect and also releases without issue. I have printed several things and they have all come out nicely. Well, to me they look nice compared to my Tronxy X1. The other day I printed my longest print ever, it was over 30 hours, printed the marble machine. It was pretty cool. See video for some of that print. My camera messed up a couple times so I only got some of it.

    Jan 09,2019

  • Alfawise U30 3D printer
    Yes (1) Color: Black Size: U30 EU Plug
    Alfawise U30 3D printer
    Package arrived from Germany to Poland 4 days after the purchase. Product was packed carefully, thanks to foam buffera no damages are possible during transportation. Printer arrived partly pre-assembled already (main sets). Final assembly took me about hour and a half thanks to clip on youtube (printed manual could be a bit better). Printer works fine. I have another 3D printer for 2 years already and I can tell that I haven't expected quality this high as U30 :-) Alfawise printer is a good quality, properly desgined machine! I have used the Creality Ender 3 profile for Cura slicer (just modifying hot bed dimensions for 220x220). I just simply love it.

    Aug 06,2019

  • Angelo
    Yes (6) Color: Black Size: U30 EU Plug
    Perfect
    Excellent and beautiful 3D printer It is easy to assemble, solid, with an aluminum frame, glass plate, and hidden electronics. In the well-packed box you will find everything you need to assemble it in a short time. I am fully satisfied with this printer with its competitive price and high quality. I recommend it to people like me who want to start with 3D printing without spending too much and without giving up a good product

    Dec 29,2018

  • MariuszEm
    Yes (1) Color: Black Size: U30 EU Plug
    Awesome, best value
    The printer is awesome. Really fast assembly, well made. Good quality parts. I am surprised what I get for such a low price. It's not a budget printer by quality. Idea to use short bowden is genius. It lacks cons of bowden, got all the pros same time. I bought it for fun, but recieved really good printer for work! One word about shippping - nice. Second word - fast. Love you Alfawise, love you GearBest!

    Dec 22,2018

FAQ for Alfawise U30

  • Where to download the firmware of Alfawise U30 DIY 3D Printer?

  • How to update the firmware of Alfawise U30 DIY 3D Printer?

    You can refer to this post: How to update Alfawise 3D printer firmware?
  • Where to download the user manual of Alfawise U30 DIY 3D Printer?

  • What if the filament does not discharge from the machine?

    1. After the machine nozzle is heated, the consumables are normally fed into the feeding mechanism by hand, and then passed through the Teflon tube to enter the nozzle.

    2. When it is found that the gear of the feeding mechanism emits a "beep" sound, it can first check whether the consumables are wound, causing the extrusion mechanism to pull the material.

    3 If this is not the reason, raise the machine nozzle and use the 0.4mm needle in the toolbox to insert it from below the copper nozzle and rotate while inserting.

    4. Under normal circumstances, this needle can be used to open the copper nozzle, so that the feed is smooth. The reason for this blocking is generally that there are impurities in the consumables, which leads to plugging.

  • When the machine returns the filament, it can't be returned. What should I do when stuck in the pneumatic joint?

    1. Before returning the material, please heat the nozzle first, and then withdraw the consumables as soon as possible. If you can't pump it, you can re-feed the material with the advanced material, and melt the extruded block formed at the end of the consumable in the nozzle.

    2. When withdrawing the consumables, before the end of the consumables reaches the pneumatic joint, we will usually pull the Teflon directly from the Teflon and cut the end of the consumables.

    3. Because the end of the consumables in the nozzle will be deformed by heat, if the end deformed consumables are directly pulled out, it may be stuck to the pneumatic joint or the limit switch for damage detection. (The limit switch for the broken material detection is single Towards).

  • What should I do if I cannot resume printing after power shutdown?

    If the power is suddenly turned off when the part is first printed, the machine will not save the print data. Unless the height of the print exceeds 0.5mm, the power failure will be supported. If the height is less than 0.5mm, it is recommended to reprint directly.
  • When the machine is leveling, the nozzle moves to the left, it can be leveled normally. When the nozzle moves to the right, it is found that the distance between the nozzle and the heated bed are very far or very close. If the spring is adjusted to the extreme position, it still cannot be leveled.What should I do?

    If this happens, the X-axis beam is generally loose. At this time, the hex socket on the right side of the machine can be adjusted with a wrench to adjust the tightness.
  • After the machine heats up, the filament is discharged normally. However, when the printing is performed for the first time, the curling occurs on the platform. After printing several layers, the filaments get out of the platform. What can I do?

    1. After the user gets the 3D printer, if the leveling is found to be curled on the first layer of silk, it feels like it is gently falling on the platform. It can be judged that the leveling is not adjusted, and the nozzle is too high from the hot bed.

    2. At this point we need to re-level, the quality of the leveling can largely determine the success rate of the part printing.

    3. In addition, in order to ensure good contact between the model and the platform, we can set the larger plane of the model face down when slicing, and can also be set in the slicing software to add Raft to the model, which can make the model stick to the platform firm.

  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

    The solution to under-extrusion (not extruding enough plastic)

  • Why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

    The detail you can read this post:

    Solutions to holes and gaps on the top surface during 3D printing

  • How does 3D printer work?

    In fact, although there are many different brands of 3D printers, they all basic working principle is same: How does 3D printer work?
  • How to debug the heatbed of 3D printer without auto leveling?

    There are many 3D printers that do not have automatic leveling,the platform leveling is very important. Let's talk about how to debug heating platform: How to debug 3D printer’s heating platform
  • How to stop 3D prints from warping?

    When using a 3D printer, the first layer always fails to print, and warps when print several layers. It is really make people desperation, this post will help you to fix the problem: How to stop 3D prints from warping
  • How to choose the right filament?

    When choosing a proper 3D printer filament, we need to consider the different features of its materials:

    Pick the right 3D printer filament

    3D printer filament comparison

  • How to choose a 3D printer?

    We take a look at the key factors to consider when purchasing a 3D printer: 7 things you need to know before buying a 3D printer
  • How to using Cura 3D slicing software?

    Cura is an open source 3D printer slicing application, it is widely used in 3D printing. Let's talk about how to install Cura 3D slicing software and operate it: Cura 3D slicing software installation and operation
  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

  • How to deal with the 3D printer nozzle jam?

    We will introduce a couple of single steps to help you dealing with this problem: How to deal with the 3D printer nozzle jam
  • How to solve cracking or breaking of layers during 3D printing

    We will discuss some typical reasons and corresponding solutions: How to solve cracking or breaking of layers during 3D printing
  • Why 3D printer details can not be printed out?

    There are several options that allow you to successfully print this subtle detail: Why 3D printer details can not be printed out?
  • I want to print a large object, which 3D printer is better for me?

    We recommended the TEVO Black Widow 3D Printer Kit, because of it's large printing area (up to 370 x 250 x 300mm).

    The detail tips for choosing a 3D printer, you can read this post:

    3D Printer buying guide
  • How to make my 3D-printed models look smooth and shining?

    Acetone Vapor is an easy way to smooth your ABS prints. Please check the specific steps in this guide:

    Acetone Vapor - A great way to make your 3D-printed models look smooth and awesome

  • View More

Customer Questions

  • All(1)
  • Product Information(1)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

What is the Model Number of the Extruder on the Alfawise U30. Youtube reviews are saying it is a Mark 10. Is that correct?

By Paul McNulty Mar-28/2019 06:28:04

A
Hello Paul,The extruder is 42 stepper motorThank you for your understanding.

1 Questions & Answers View All

Sponsored Products Related to This Item

Shipping

There are two key factors which will affect the time you receive your items.

1
Item processing time
After receiving your order,we require some time to test the product to ensure its quality.The exact processing time varies depending on the item.The average processing time is 3 working days.but this can also be affected by the item's stock status. For small quantity orders,the processing time is 1-3days while larger quantity orders may require 2-5days.
2
Shipping methods
China Warehouse:
Shipping Type Country or Region Arrive within 1-7 Days Arrive within 8-15 Days Arrive within 16-30 Days Arrive within 31-45 Days Average Time (Days)
Unregistered Air Mail or Registered Air Mail United States 0.52% 44.87% 49.88% 3.5% 18.13
Spain, United Kingdom, Italy, Germany, France & Portugal 5.18% 43.44% 48.34% 1.17% 15
Netherlands, Greece, Poland, Hungary, Slovakia, Czech Republic 2.96% 40.34% 52.54% 3.74% 18.66
Russia 0% 4.45% 84.41% 11.1% 28
Japan, Korea 0% 21.30% 68.80% 9.66% 17.75
Brazil 0% 0% 23.91% 72.09% 38.6
Turkey 0% 37.75% 59.05% 3.1% 20.33
Thailand, Singapore & Malaysia 0% 40.39% 56.12% 2.6% 16.2
Other countries 0.7% 38.79% 47.94% 8.56% 23.57
Priority Line United States 12.28% 79.05% 7.4% 0.52% 11.75
Spain, United Kingdom, Italy, Germany, France & Portugal 8.44% 66.56% 23.45% 0.45% 13.55
Russia 0% 3.48% 75.79% 20.04% 31
Brazil 2.21% 6% 61.29% 25.46% 30
Turkey 20.42% 77% 3% 0.08% 10
Australia 7.67% 86.60% 5.68% 0% 11
Korea 97.54% 1.57% 0.89% 0% 7
Japan 95.80% 2.09% 0% 0% 6.84
Thailand, Singapore & Malaysia 58.96% 41.04% 0% 0% 8.45
Other countries 22.33% 30.8% 27.62% 17.64% 18.65
Expedited Shipping ALL countries(EMS) 3.8% 46.8% 26% 15% 14.8
ALL countries(DHL) 65.8% 25.75% 3.86% 0.37% 6.72
GW Warehouse: Typically 3-5 days to the UK, 3-7 days to other European countries.
USA Warehouse: Generally, 3-7 days to a USA address.
ES Warehouse: Generally, 2-5 days to the Spain, 3-7 days to the Portugal.
Shipping from warehouse nearest to shipping address is faster. Additional charges may apply.
Note: This is a general guide and delays maybe caused force majeure, natural disasters, inclement weather, war, public holidays, and factors outside our control. Generally speaking, we offer free shipping for Alfawise U30 to United States (US, USA), United Kingdom (UK, GB), Germany, Italy, France, Spain, Portugal, Poland, Brazil, Russia, Japan, Greece, Austria, Hungary, Slovakia, Czech Republic, Ireland, Lithuania, Israel, Denmark, Norway, Sweden, Canada, Australia, Netherlands, Korea, Turkey, Mexico, Ukraine, Romania, Columbia, Thailand, Singapore, Malaysia etc. Please choose the shipping methods for the final price.

Payment

Gearbest.com accepts PayPal,Credit Cards,Wire Transfer,Westem Union, YandexMoney,Webmoney,Boleto,OXXO and BKM as secure payment methods.

1
Paypal
The most convenient payment method in the world.
2
Wire transfer
For orders which exceed $1,500,please contact us at support@gearbest.com.
Note: please email us the order number,the amount transferred along with currency type,and the exact date of the wire transfer.
3
Western Union
Please contact us at support@gearbest.com for details.
Note: please email us the following information after you have paid via Westem Union:
· Control Number(10 digits)
· The exact amount sent along with the currency
· Name of sender.
· Address of sender
4
YandexMoney、 Webmoney
With YandexMoney and Webmoney, it is convenient and safe for you to pay via credit card、wallet or cash
5
Boleto
For Brazil customers, we accept Boleto: you only need to fill in the payment information, remember your Boleto Voucher information and pay it within 3 days at any Boleto stores.
6
OXXO
For Mexico customers, we accept OXXO: you can choose OXXO payment on our website, and then remember your OXXO Voucher information and pay it within 3 days at any OXXO stores.

Do you want to bulk buy Alfawise U30 ? Please submit your wholesale Alfawise U30 inquiry below. Please note we usually don’t offer free shipping on wholesale Alfawise U30 orders, but the wholesale price will be a big bargain.

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service