Product keywords
Please enter the email address account
Alfawise U30 2.8 inch Touch Screen DIY Desktop 3D Printer
Share to:

Alfawise U30 2.8 inch Touch Screen DIY Desktop 3D Printer

- Black U30 EU Plug

220 x 220 x 250mm Build Volume Filament Run-out Detection Power Outage Resume Function
169.99 $206.96 Discount : 18% OFF
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Jul 22 - Jul 24, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item

Recommended for You

Customers also shopped for

Alfawise U30 is an incredible 3D printer designed for professionals and amateurs alike. It trains hands-on ability, and only 1 hour is required to finish the assembly. It boasts high cost-performance ratio - any DIY enthusiast will not be unable to resist. U30 has a large build volume - 220 x 220 x 250mm for most challenges. More importantly, printing with Alfawise U30 is hassle-free because the two resume functions prevent any imperfection and failure due to power outage and filament run-out. Control the process and set parameters on the touchscreen. Enjoy easier and more successful 3D printing!

Main Features:
0.1 - 0.4mm precision printing
With standard 0.4mm diameter nozzle, accurate alignment, and up to 120mm/s speed
Filament run-out protectionandpower outage protection
More successful 3D printing, 100 percent completion on every print
2.8'' full color touchscreen
The display can be installed on the left or right side to provide more intuitive control, especially great for the left-handed
Built-in power supply, under the build platform to avoid the electric shock
Quick assembly only 1 hour needed
Great for any beginners to train hands-on ability
● Reinforced aluminum alloy construction, durable, in classical black and red colors
● Powerful heat bed using safety voltage for fast heating. With heat-resistant heat bed sticker, easier to use and clean
● 100 Deg.C max. heat bed temperature, 250 Deg.C max. nozzle temperature for various filaments, such as PLA, ABS, wood filled, etc.

Pleaseclick here to download the user manual, and click here to download the firmware
Join the discussion, find technical support, up-to-date information, and share your experiences in the Facebook group

Tip: the power outage recovery functions well when you print more than 0.5mm in height. If the height is less than 0.5mm, it is recommended to print again.

● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.



Brand: Alfawise
Model: U30
Type: DIY
Material (Frames): Aluminum
Platform board: Aluminum Base
Engraving Area: 220 x 220 x 250mm
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: Room temperature to 250 degree
Layer thickness: 0.1-0.4mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: 120mm/s (max.), 30 - 70mm/s ( recommended )
Platform temperature: Room temperature to 100 degree
Supporting material: ABS,PLA,Wood Filled
Material diameter: 1.75mm
File format: G-code,OBJ,STL
XY-axis positioning accuracy: 0.0125mm
Z-axis positioning accuracy: 0.0025mm
Voltage: 24V
Host computer software: Cura,Repetier-Host,Simplify3D
Packing Type: unassembled packing
System support: Windows / Mac / Linux
Connector Type: TF card,USB

Dimensions and Weight

Product weight: 7.8000 kg
Package weight: 8.6000 kg
Product size (L x W x H): 42.50 x 40.20 x 50.50 cm / 16.73 x 15.83 x 19.88 inches
Package size (L x W x H): 46.70 x 41.20 x 18.70 cm / 18.39 x 16.22 x 7.36 inches

Package Contents

Packing Contents: 1 x 3D Printer Kit ( Semi-assembled ), 1 x English Manual
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug
Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug

Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug

Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug

Alfawise U30 DIY 3D Printer 220 x 220 x 250mm with Extruder 1.75mm 0.4mm Nozzle- Black U30 EU Plug

1. Please read the user manual carefully before installation and operation
2. Please adjust the voltage on the power supply of printer according to your local voltage
3. Keep the printer away from flammable, explosive and such objects with high heat source

Suggested Products

Customer Reviews

4.75 out of 5
  • 249
  • 59
  • 2
  • 1
  • 3
See all 314 reviews Write a Review
  • James
    Yes (2) Color: Black Size: U30 US Plug
    Good Printer
    I really like this Printer, it worked right out of the box after about 30 minutes to assemble, mostly took this long because I wanted to make sure everything was right. I have had this printer for about a month now and so far so good. I like how easy it is to use, the bed level feature works pretty well. The one thing I did not like was the existing bed cover, everything stuck too well and would not come off, I tried heating it up a little and it did not help eventually i ruined it by trying to scrape too hard so I ordered some new plate covers after printing on plain glass, and now everything sticks perfect and also releases without issue. I have printed several things and they have all come out nicely. Well, to me they look nice compared to my Tronxy X1. The other day I printed my longest print ever, it was over 30 hours, printed the marble machine. It was pretty cool. See video for some of that print. My camera messed up a couple times so I only got some of it.

    Jan 09,2019

  • Angelo
    Yes (4) Color: Black Size: U30 EU Plug
    Ottima e bellissima stampante 3D
    Si presenta di facile assemblaggio, solida, con telaio in alluminio, piatto in vetro, e elettronica nascosta.
    Nella scatola ben imballata troverete tutto il necessario per assemblarla in poco tempo.
    Sono pienamente soddisfatto di questa stampante dal prezzo concorrenziale e dalla qualità altissima.
    La consiglio a chi come me vuole iniziare con la stampa 3D senza spendere troppo e senza rinunciare ad un buon prodotto

    Dec 29,2018

  • Edelhagen
    Yes (0) Color: Black Size: U30 EU Plug
    guter Kauf
    Ich habe mir früher ein Video auf Youtube angesehen, also habe ich beschlossen, U30 auszuprobieren. Ich habe dann gleich von der beiliegenden SD-Karte ein 3D-Modell gedruckt. Dies hat super funktioniert. Ich muss mich nun noch in die beiliegende Slice-Software „Cura“ einarbeiten und mir Druckvorlagen für meine Figuren organisieren.

    Jan 13,2019

  • Mathias
    Yes (1) Color: Black Size: U30 US Plug
    excellente imprimante
    Emballage niquel, manuels de montage très clair, outil de montage fourni
    Seul hic le pla fourni est vraiment ridicule, à peine de quoi faire 1 ou deux impression

    Jan 17,2019

  • Phl29
    Yes (5) Color: Black Size: U30 EU Plug
    Excellente petite machine mais ...
    Reçue après quatre semaines seulement. Emballage exemplaire. Aucune pièce manquante ni défectueuse. Qualité chinoise haut de gamme.
    Remarquable précision sur les quelques impressions simples que j'ai déjà réalisées. Vraiment bluffant !

    Mais il faut d'abord monter la machine... Dommage que la notice ne soit pas plus claire. Dommage aussi que la carte sd soit fournie avec un adaptateur ultra bas de gamme cette fois. C'est la demie étoile en moins.
    Bref, il faut s'y atteler avec patience et précision. Je suis un bricoleur plutôt averti et j'y ai passé deux bonnes heures. Je me permets quelques conseils ...

    0 - Préalable
    - Lire (si possible) le PDF en Anglais présent sur la carte SD fournie.

    1 - Planéité
    - Déposer la partie déjà montée sur une surface horizontale et parfaitement plane.
    - Desserrer les vis d'assemblage. S'assurer que les quatre pieds reposent correctement sur le support puis
    resserrer progressivement l'ensemble.

    2 - Montant verticaux.
    - Ils ne sont pas identiques. L'un d'eux comporte deux trous de fixation. Après montage, les trous doivent être en bas à droite.

    3 - Axe des X : montage sur le portique.
    - Donner du jeux pour installer la barre horizontale avec buse et extrudeuse. Pour cela ne pas hésiter à desserrer les montants verticaux préalablement montés ainsi que les roulettes guides à droite et à gauche.
    - Placer un carré de plastique d'emballage sur le plateau (pour amortir la chute rapide éventuelle). Glisser l'ensemble horizontal sur les deux montants verticaux.
    - Resserrer les montants verticaux.
    - fixer la barre haute du portique.
    - Régler en resserrant les roulettes et en s'assurant de la fluidité mais sans jeu du déplacement vertical.

    4 - Connecteur du plateau.
    - Ne faites pas comme moi ! Veiller à brancher le large connecteur (blanc) qui se trouve au bout du flexible noir à celui du plateau :-)) , ça évite le message d'erreur de température à la mise en route.

    Pour le reste, on trouve le détail sur le PDF fourni sur la carte SD.
    Au bout du compte, c'est un vrai plaisir.

    Enfin , merci Héliox pour votre belle présentation de la machine sur Youtube.

    Feb 15,2019

  • Max
    Yes (1) Color: Black Size: U30 EU Plug
    best you can get for littly money... but not perfect
    I received the printer after 16 Days (china warehouse EU priority Line) , as promised easy to finish mounting. There are slightly uneven Cuts on the alloy profiles, so it is necessary to check right angles, could solve with underlaying pices of paper before fastening the screws. But found another problem after this in movement of the heatbed, wasn't smooth enough to ensure good printing. Found some marks on the rollers, perhaps from hard handling during shipment, so opended a ticket which was replied to very fast... but solution to make video and wait for another reaction would have lead to more days not using the printer.. so i decided to buy some rollers locally, after changing them, adjusting all the rollers and tightening all screws i could do the first testprint, successful in the first attempt with the enclosed testing material, white PLA. The version of cura on the enclosed memory card was old but suitable for first attempt, the software asks if new version to be downloaded when started first time, even if downloading new version... there is no profile for the printer in new cura, so going back to the old version. It is usable but would be great if gearbest can deliver a profile for the U30 in new Cura 3.6 or even 4.0 (Beta)
    So final statement, yes, printer is very good in handling and printing but there are still a few improvements possible which would be easy to implement, some improvements are available in thingiverse, such as clamps for the display flat cable or mounting points for cable ties. You need to be interested in finishing the printer yourself to perfection, but overall best buy for this price.

    Feb 18,2019

  • 3DSchnurpi
    Yes (0) Color: Black Size: U30 EU Plug
    Am Anfang Hui in der Mitte Pfui und zum Schluss doch wieder Hui
    Es ist ein Drucker wie viele aber doch hat er Vorteile die andere nicht haben. Ich fange mal von Anfang an. Der Zusammenbau geht schnell und ist in 30 Minuten fertig. (OK das geht bei anderen auch) Die Qualität der teile war dann aber doch schon ein Punkt wo der erst „Hui“ aufgekommen ist. So schnell wie das „Hui“ da war… war es auch wieder weg. Die Rollen waren so unrund, dass ich auch Würfel hätte nehmen können. Egal weiter aufgebaut und schon überlegt neue zu kaufen.
    Erster Testdruck war schnell gemacht, da das Benchy Boat auf der Micro SD Karte drauf war… Das fand ich schon wieder GEIL . Ok der Zappelkasten ruckelt ganz schön beim drucken. TL Smoother genommen und schnell verbaut. Hui war das ein Erlebnis. Jetzt bin ich wieder Glücklich. Schnell sind auch noch ein paar Verbesserungen gedruckt. Die Firmware lässt nichts zu wünschen übrig. Ich kann alles auf dem Touchscreen einstellen wo ich sonst in das Marlin geklettert bin um alles umzuschreiben. Die Rollen sind nun auch eingefahren und laufen super rund. Wenn die BuildTak Druckplatte mal defekt sein sollte kann ich gleich auf der Glasplatte weiter drucken. So muss ich nicht noch eine extra kaufen.
    Mein Fazit: Ich finde den Drucker für das Geld Super. Er bietet mehr als ein Ender 3 und macht auch mehr Spass. … und ja ich habe schon 2 Ender 3 gekauft und weiß was ich da sage. Die Firmware macht einen sehr runden und durchdachten Eindruck.
    Also alles zusammen Hui trotz zwischendurch mal Pfui.

    Apr 11,2019

  • Petitgilou
    Yes (1) Color: Black Size: U30 EU Plug
    Super machine pour le prix
    Pour le prix, j'ai été (favorablement) étonné de la précision de cette machine. Je n'ai fait que du PLA
    Le montage se fait en une heure et il n'y a que le fin de course en Z à régler.
    J'ai imprimé un vase avec une paroi une couche de 0.2. Pas de débordement.
    Il faut se limiter à 40 mm/s.
    Elle est un peu bruyante et le plateau n'était pas parfaitement plan. Je l'ai facilement remplacé par un miroir de 3 mm, dépoli au papier de verre 600. Aucun besoin de colle ou laque (avec du PLA+ Sunlu). Par contre, il faut absolument faire le niveau à chaud. Quand le plateau se refroidit, l'objet se décolle tout seul. Pratique, mais impossible de faire une reprise après perte de courant ou fin de filament si ça a duré trop longtemps.
    La carte SD derrière n'est pas pratique mais au bout de 2 ou 3 fois, on trouve sa fente facilement. Et pour 2 ou 3 euros, il existe des prolongateur sur nappe.
    Les molettes de nivelage sont un peu petites. Mais pour les premières impressions, j'ai fait des gros manetons trouvés sur Thinkverse (idem U20).
    Elle tourne 6 heures/jour en moyenne et ne présente pas de fatigue depuis un mois.
    Le plateau est petit (20 cm), mais il faut savoir ce qu'on veut : un immense plateau ou un petit prix.
    J'ai fait des essais avec un serveur d'impression pour éviter les manipulations de carte SD. Pas de problème.
    Si vous débutez et ne voulez pas trop investir avant de savoir si ça vous plait, n'hésitez pas, prenez cette machine. Pour les comparaisons avec sa soeur, Criality Ender3, vous trouverez de nombreux posts.

    Mar 25,2019

  • vinante
    Yes (0) Color: Black Size: U30 EU Plug
    Ho voluto aspettare un po di tempo dopo l'acquisto per dare una recensione a questa stampante per non affrettare considerazioni errate.Non avendo mai avuto una stampante 3d prima di comprarla mi sono informato sulle stampanti 3d e tutto cio che ci gira intorno (programmi,capacità ecc) e ho valutato di cosa avrei avuto bisogno in base alle mie esigenze.Visto molte recensioni con pregi e difetti di molte stampanti e le upgrade da apportare ho scelto alfawise u30 ancora non ho montato I tl smoother perchè voglio vedere bene tutte le capacità di questa stampante e lo farò solo quando le avrò viste e sarò diventato esperto in materia per ora ho iniziato a progettare varie cosette e faccio esperienza ho incontrato vari errori ma risolti dovuti a dei miei sbagli detto cio considero e valuto questa stampate ottima di struttura e funzionale è una macchina meravigliosa e la consiglierei ad esperti e inesperti.
    2 svantaggi
    1 l'alloggiamento per la scheda sd posizionata dietro la stampante l'avrei preferita frontalmente ma sto pensando di comprare un prolunga per portarla avanti considerando questa operazione un'upgrade .
    2 lo schermo touch secondo me dovrebbe avere una copertura posteriore in modo da proteggere il circuito e tenere fisso il filo si risolve con una piccola stampa 3d.

    Jul 05,2019

  • David
    Yes (1) Color: Black Size: U30 EU Plug
    Mise en oeuvre trés simple
    J'ai reçu le colis dans les temps affichés (30~40 jours), l'imprimante est bien emballée et la mouse protège correctement les différents éléments qui composent celle-ci.

    Le montage est relativement aisé, mais avec une coquille pour le positionnemnt du switch de fin de course de l'axe Z (12 mm sur la notice imprimée contre 15 mm pour la notice sur la carte SD). La structure de l'imprimante est entièrement en métal et est rigide ce qui inspire confiance pour une utilisation moyenne. Par contre prenez bien le temps de régler le pincement des roues de guidage à l'aide des exentriques

    Après avoir pris 15 mm, et fait le nivellement du plateau j'ai imprimé deux des fichiers GCODE qui se trouvent sur la carte SD., et les résultatw d'impression trés bon alors qu'il s'agit de ma première imprimante ce qui est encourageant pour la suite.

    Pour le niveau sonore je ne la trouve pas trés bruyante ce qui doite tenir de sa petite taille ; les premières impressions ayant été faites sur une table ronde en bois avec un seul pied central)

    Je recommande vivement cet imprimante le rapport qualité prix est élévée.

    Feb 22,2019

FAQ for Alfawise U30 2.8 inch Touch Screen DIY Desktop 3D Printer

  • Where to download the firmware of Alfawise U30 DIY 3D Printer?

  • How to update the firmware of Alfawise U30 DIY 3D Printer?

    You can refer to this post: How to update Alfawise 3D printer firmware?
  • Where to download the user manual of Alfawise U30 DIY 3D Printer?

  • What if the filament does not discharge from the machine?

    1. After the machine nozzle is heated, the consumables are normally fed into the feeding mechanism by hand, and then passed through the Teflon tube to enter the nozzle.

    2. When it is found that the gear of the feeding mechanism emits a "beep" sound, it can first check whether the consumables are wound, causing the extrusion mechanism to pull the material.

    3 If this is not the reason, raise the machine nozzle and use the 0.4mm needle in the toolbox to insert it from below the copper nozzle and rotate while inserting.

    4. Under normal circumstances, this needle can be used to open the copper nozzle, so that the feed is smooth. The reason for this blocking is generally that there are impurities in the consumables, which leads to plugging.

  • When the machine returns the filament, it can't be returned. What should I do when stuck in the pneumatic joint?

    1. Before returning the material, please heat the nozzle first, and then withdraw the consumables as soon as possible. If you can't pump it, you can re-feed the material with the advanced material, and melt the extruded block formed at the end of the consumable in the nozzle.

    2. When withdrawing the consumables, before the end of the consumables reaches the pneumatic joint, we will usually pull the Teflon directly from the Teflon and cut the end of the consumables.

    3. Because the end of the consumables in the nozzle will be deformed by heat, if the end deformed consumables are directly pulled out, it may be stuck to the pneumatic joint or the limit switch for damage detection. (The limit switch for the broken material detection is single Towards).

  • What should I do if I cannot resume printing after power shutdown?

    If the power is suddenly turned off when the part is first printed, the machine will not save the print data. Unless the height of the print exceeds 0.5mm, the power failure will be supported. If the height is less than 0.5mm, it is recommended to reprint directly.
  • When the machine is leveling, the nozzle moves to the left, it can be leveled normally. When the nozzle moves to the right, it is found that the distance between the nozzle and the heated bed are very far or very close. If the spring is adjusted to the extreme position, it still cannot be leveled.What should I do?

    If this happens, the X-axis beam is generally loose. At this time, the hex socket on the right side of the machine can be adjusted with a wrench to adjust the tightness.
  • After the machine heats up, the filament is discharged normally. However, when the printing is performed for the first time, the curling occurs on the platform. After printing several layers, the filaments get out of the platform. What can I do?

    1. After the user gets the 3D printer, if the leveling is found to be curled on the first layer of silk, it feels like it is gently falling on the platform. It can be judged that the leveling is not adjusted, and the nozzle is too high from the hot bed.

    2. At this point we need to re-level, the quality of the leveling can largely determine the success rate of the part printing.

    3. In addition, in order to ensure good contact between the model and the platform, we can set the larger plane of the model face down when slicing, and can also be set in the slicing software to add Raft to the model, which can make the model stick to the platform firm.

  • What can I do when the LCD screen displays “Detected abnormal temperature of the hotbed” and the left side of the LCD alarms the “hot bed cold”?

    Here is the solution
  • What can I do when the LCD screen displays "Detected abnormal temperature of the hot bed", and the left side of the LCD alarms the hotbed "Hot"?

    Here is the solution
  • What can I do when the LCD screen displays "Detected abnormal temperature of the print head", and the alarm print head is "Cold"?

    Here is the solution
  • What can I do when the LCD screen displays "Detected abnormal temperature of the print head" and warns that the print head is "Hot"

    Here is the solution
  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

    The solution to under-extrusion (not extruding enough plastic)

  • Why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

    The detail you can read this post:

    Solutions to holes and gaps on the top surface during 3D printing

  • How does 3D printer work?

    In fact, although there are many different brands of 3D printers, they all basic working principle is same: How does 3D printer work?
  • How to debug the heatbed of 3D printer without auto leveling?

    There are many 3D printers that do not have automatic leveling,the platform leveling is very important. Let's talk about how to debug heating platform: How to debug 3D printer’s heating platform
  • How to stop 3D prints from warping?

    When using a 3D printer, the first layer always fails to print, and warps when print several layers. It is really make people desperation, this post will help you to fix the problem: How to stop 3D prints from warping
  • How to choose the right filament?

    When choosing a proper 3D printer filament, we need to consider the different features of its materials:

    Pick the right 3D printer filament

    3D printer filament comparison

  • How to choose a 3D printer?

    We take a look at the key factors to consider when purchasing a 3D printer: 7 things you need to know before buying a 3D printer
  • How to using Cura 3D slicing software?

    Cura is an open source 3D printer slicing application, it is widely used in 3D printing. Let's talk about how to install Cura 3D slicing software and operate it: Cura 3D slicing software installation and operation
  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

  • How to deal with the 3D printer nozzle jam?

    We will introduce a couple of single steps to help you dealing with this problem: How to deal with the 3D printer nozzle jam
  • How to solve cracking or breaking of layers during 3D printing

    We will discuss some typical reasons and corresponding solutions: How to solve cracking or breaking of layers during 3D printing
  • Why 3D printer details can not be printed out?

    There are several options that allow you to successfully print this subtle detail: Why 3D printer details can not be printed out?
  • I want to print a large object, which 3D printer is better for me?

    We recommended the TEVO Black Widow 3D Printer Kit, because of it's large printing area (up to 370 x 250 x 300mm).

    The detail tips for choosing a 3D printer, you can read this post:

    3D Printer buying guide
  • How to make my 3D-printed models look smooth and shining?

    Acetone Vapor is an easy way to smooth your ABS prints. Please check the specific steps in this guide:

    Acetone Vapor - A great way to make your 3D-printed models look smooth and awesome

  • View More

Customer Q&A

  • All(1)
  • Product Information(1)
  • Stock Status
  • Payment
  • About Shipping
  • Others

What is the Model Number of the Extruder on the Alfawise U30. Youtube reviews are saying it is a Mark 10. Is that correct?

By Paul McNulty Mar-28/2019 06:28:04


Hello Paul,

The extruder is 42 stepper motor

Thank you for your understanding.


What is the Model Number of the Extruder on the Alfawise U30. Youtube reviews are saying it is a Mark 10. Is that correct?

By Paul McNulty Mar-28/2019 06:28:04


Hello Paul,

The extruder is 42 stepper motor

Thank you for your understanding.

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

1 Questions & Answers View All

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service