Creality3D CR - 10S 3D Printer

-Very good quality prints
-Prints in most filaments
-Everything is very high quality, heavy, metal, very skookam.
-Chooches like the best of them!
-Super quick and easy to assemble.
-Some extra parts even
-I've only just started but this seems to be one of the easier printers to upgrade quite a bit
-Included micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc.

Some incorrect things that GearBest answered when people have asked in the questions section, that I would like to clear up, I just hope those same people see this review.

-It DOES come with a glass bed top ontop of the aluminum heated bed base.
-It DOES come with a little PLA filament. It's not a ton but it's quite a bit to get you started, I've printed 4 or 5 things so far and I haven't even put a dent in it.
-I believe the extruder in this is an MK8

Finally on to shipping. I'm somewhat happy to say that this is the fastest I've ever received something from China. Usually things take 2-3 weeks or more but this arrived in 10 days from China to Central US (Northern IL). The one weird thing and I'm guessing something went wrong was that when I ordered it I chose expedited shipping, and DHL EXT. It was NOT clear what DHL EXT is or what half of the shipping options mean, but I can say that my package started in China using China Post and was delivered to my door using USPS, the entire time I had a USPS tracking number to track it.

Now when I ordered and chose DHL EXT there was NO added shipping cost even though it said expedited, which I found interesting because I'm fairly certain expedited shipping from China would cost a few bucks. So I figure maybe this "DHL EXT" isn't for shipping to the US and so they just sent it through USPS. But I can't say for sure.

Suggestion

-Not really a con but either it is tested before they ship it or I got one that someone returned and they fixed it or something.
-Sticker on fan peeling off
-A coupler's set-screws on the Y-axis stepper motor weren't affixed correctly, easy fix though so again not really a con. Plus I've read that some people have has those couplers snap in shipping so I figured this may have been done on purpose.

The issue I had was when I went to tighten the set-screws they went all the way through and fell into the middle of the coupler. No big deal I had to loosen all the set screws and move things around to get them out and realized I had to move the coupler up a little bit for it to connect the Y-axis threaded pole and the stepper motor. Just an FYI

Oct 04,2017

La stampante CR-10 è una buona stampante che ha un ottimo rapporto prezzo-prestazione. E' facile da montare anche dai meno esperti; di fatto c'è da unire i due pezzi principali, stringere le viti e collegare i fili x, y, z nella giusta posizione e poi non resta che partire per la prima stampa di prova. Come “tradizione” NON STAMPATE il file g-code del Gatto... è corrotto e dopo due ore di stampa va fuori centro ed è tutto da buttare! Scaricate da internet uno dei tanti files di prova e provate con quelli; a me ha funzionato molto bene il Robot di Ultimaker.
Per stampare in PLA non è necessario scaldare il piatto, occorre solo il nastro per dare aderenza. Occorre fare una buona calibrazione, che con un piatto di così grandi dimensioni non è semplicissima anche se, una volta fatta, viene mantenuta a lungo.
Il problema maggiore nella calibrazione del piatto è che se vanno bene gli angoli al centro la testina di stampa o è troppo vicina e raschia la superficie o è troppo lontana e il layer non aderisce bene... Ciò è probabilmente dovuto al fatto che il piano in vetro non è perfettamente piano ma tende ad alzarsi o abbassarsi al centro. Consiglio quindi, dato che le stampe non saranno sempre alla massima dimensione, di calibrare il piatto sulla parte centrale più utilizzata per stampe con la base fino a 18x18 cm, ed utilizzare tutti i 40 cm di altezza.

Consiglio questa stampante, soprattutto se è la vostra prima stampante 3D dove poter sperimentare ed imparare i trucchi per una buona stampa.

Suggestion

E' poco curata la documentazione fornita. La scheda fornita dovrebbe avere un maggior numero di files STL di esempio ed alcuni GCODE perfetti con le indicazioni dei parametri di slicing in modo da fare subito delle prove e verifiche. Sarebbe necessario anche avere da subito CURA nella versione più aggiornata, senza dover andare a scaricarla da internet.

Dec 05,2017

The printer works well and gives good prints. I'm new to 3D printing so I can't really compare to anything else except youtube clips from other printers. One thing I have notices is that the cat print (even though it didn't print the head) included gets printed in super awesome quality and prints I've gotten of Thingiverse and sliced with Cura does not reach that quality, I guess it has to do with settings in Cura and maybe the details of the 3D files. The quality is very nice anyway though, so no real complaint, just an observation. It takes some skills to do the right settings when slicing.

My machine was not actually working ok when I first started it up. The temperature measurements were resetting randomly and resulted in Low Temp errors. I found that the problem is because the cable that goes to the to the nozzle, fans etc is glitchy, when I move the cable it looses connection. I've temporarily solved it by disassembling the connector on to the main unit and bent the cables a bit but it's not a long term solution. I will ask GearBest if the can send a new cable.

Overall, for the price, this printer is very good so far and it was easy to assemble. If it hadn't been for that glitch in the cable it would have been super easy. Still, not recommended if you are looking for a Plug and Play experience, you need to watch some you tube vids, read some instructions and be ready to experiment a bit before you get nice prints.

Suggestion

Bed levelling is a bit fiddly and I think it doesn't get exactly levelled. Mine is level in the corners but it's sagging down 0.1-0.2mm in the middle. I've solved it by levelling without tape in the corners and then printing on one layer of tape to get the middle part up 0.1 mm. I'm not sure how this will work for really big prints that goes all the way out to the edges though, the nozzle might come to close to the glass. I've yet to try any of the more advanced solutions with wedges under the bed. For now it works just fine with a layer of tape.

Could use some more instructions on how to get started with setup and printing. How to get prints to stick to the bed and so on.

Aug 04,2017

Took about about 10 days to get from China to Northern California. Got the printer set-up and printing in about an hour. The settings on the cat file that comes on the SD aren't great, had to lower nozzle temp to 192 and raise bed temp to 60. Still working on first complete print (PSU box legs) and notice a lot of stringing, which is likely due to settings (retraction probably).

Okay, quality control issues.1. Y-axis belt tensioner bracket was bent causing belt to ride on one side of the pulleys and twist. 2. Bracket holding y-axis stepper motor is bent and causing same issue as the other end. These are very simple things to fix, which will happen after the current print is done. 3. They did not debur and clean up the metal from the holes being drilled in the frame. Easy thing to clean up, but it probably shouldn't be there. 4. Glass bed is warped. Everyone already knows about this, and I'm sure they are aware. Hope they fix this sooner than later. 5. Hot end heat sink not screwed in on one side and is sitting cockeyed. Noticed it during current print, I think all it needs to be tightened down. I hope they didn't mess something up and then leave it like that. I'll update later.

Packaging was A+ great. Box was not beat up in shipping. Instruction manual is good enough.

For the price (compared to amazon/others) it seems like this is a great deal.

Suggestion

Sep 16,2018

The Creality3D CR - 10S 3D Desktop DIY Printer was a very simple and easy to build 3D printer that has very good print results.
Highly recommend if you are in the market for a 3D printer that is low budget with good quality print output.
Building the printer was very easy from start to finish. Very little skill was needed as a lot of the build was already done.
Unbelievable 3D printer. Well worth the money
Very good quality prints
Prints in most filaments
Everything is very high quality
Super quick and easy to assemble.
Some extra parts even
I've only just started but this seems to be one of the easier printers to upgrade quite a bit
Included micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc.
Check out my unboxing and build video
https://www.youtube.com/watch?v=jDU3mpXYGyc&t=33s

Suggestion

A few loose bolts found on the assembled parts so check when you are building yours. These may have been left loose for transport.
At this time there are no real cons as every thing was easily assembled and worked perfect from the start

Jun 25,2018

The new Creality3D CR-10s is amazing! I love it!

Well packaged, easy to assemble, easy to use with SD card or with CURA (version 3.4.1 or greater) plugged into usb, ALMOST NO UPGRADE NEEDED to get started, really good for beginner to PRO.

Apart from the printer itself and filament (CCTREE BLACK is recommended) what do you need to get started quickly?

- 2 x NEMA 17 dampers to put between the X and Y servo-motors
- 4 x 2 dots yellow squash balls (using them with Squash Feet, see thingiverse to get the stl )
- 1 x Quiet Hot End Fan (ref. Noctua 40x10mm Fan 12v NF-A4x10 FLX)
- 1 x 300x300mm mirror for bed
replace the stock glass with a simple mirror, see the video for more info https://www.youtube.com/watch?v=Kj4Xz3DwGSQ
use this mirror at 70° heat-bed and all objects will stick perfectly without any additional product (no glue, no blue tape, no spray, nothing!)

that's it!
you printer will be quiet enough and ready for production!

Hope this helps!

Suggestion

Sep 01,2018

Commandée pour 305€, je l'ai reçue à la maison seulement une semaine après. J'ai ouvert le carton, déballé les pièces et en 15 minutes, tout était monté, prêt à fonctionner. Il suffit de visser la partie verticale sur la base, brancher les câbles sur la station de contrôle, contrôler les serrages des visses, et c'est parti. De plus, elle est fournie avec une bobine de filament PLA, ce qui permet de la tester tout de suite, et de réaliser ces premières impressions. La qualité des matériaux de la Créality CR10 fait qu'il y a très peu de jeu entre les pièces, et par conséquent les impressions sont d'une très bonne qualité. Le menu (en Anglais) du boitier de contrôle est simple et se prend vite en main. Si demain je devais renouveler mon achat, c'est sans hésitation que je choisirais la créality CR10 à nouveau.

Suggestion

La seule petite amélioration à prévoir pour cette imprimante est une vitre de meilleur qualité. Celle ci est légèrement bombée au milieu.

May 19,2018

The Creality3D CR - 10S 3D Desktop DIY Printer was a very simple and easy to build 3D printer that has very good print results.
Highly recommend if you are in the market for a 3D printer that is low budget with good quality print output.
Building the printer was very easy from start to finish. Very little skill was needed as a lot of the build was already done.
I am unable to find any cons at this time I am happy to say
Unbelievable 3D printer. Well worth the money
Check out my unboxing and build video
https://www.youtube.com/watch?v=uNy7qAQY7cA

Suggestion

A few loose bolts found on the assembled parts so check when you are building yours. These may have been left loose for transport.
At this time there are no real cons as every thing was easily assembled and worked perfect from the start

Mar 10,2018

My first 3D Printer, bought after so many hours of watching youtube videos about 3D printing and this printer specifically, since it was my first one i struggled a little 2 hours but really worth, for my first print i printed the cat in SD with the white filament that came with it, the quality was AMAZING! (even though it took 3:30 hours to print), i also tested some 3D benchy boats as a newbie, changing the settings to each one in order to learn something, now i suppose only it's durability test in time remain... but as i saw on youtube some people have this printer for over a year and still no problem after all.

Suggestion

Aug 27,2018

Here is a review for Creality CR-10S (upgraded version):
Yes the the new CR-10S has
- Filament Sensor,
- Dual Lead Screw for Z
- Heated print bed
- Glass print bed
- better Quality control before shipment
-Sample gcode file (huba3h.gcode) is no longer corrupt and can be used for first printing. (takes ~4 hour to finish it)
Printing results are quite good.

----------------
Bütçenize uyuyorsa upgraded versiyonu almanızı öneririm. 11.11 indirimiyle kargo dahil 450 USD civarına geldi. Sonuçlar mükemmel.

Suggestion

It took 15 days to deliver to Carrier 40 days to receive the printer due to volume of the box, at last everything fixed

Dec 21,2017