All
Product keywords
Please enter the email address account
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit
Share to:

Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit

- White US
227530201

Mixed Color Printing
430.14
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Dec 20 - Dec 22, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance

Recommended for You

Customers also shopped for

Disclaimer:
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Modification and customization of the 3D printer are strictly forbidden. We will take no responsibility for any problems resulting from modifications.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.


Main Features:
● 2-in-1 dual extruders 3D printer: print both two color and mixer of two color filament, you can change the mix-percentage during printing
● This printer ships fully assembled and has already been calibrated at the factory ( only a few screws are required to use )
● Input: 100 - 120V, 6.8A / 200 - 240V, 3.4A 50 / 60Hz
● Output: 24V / 14.6A 
● Extruder temperature: maximum 250 Deg.C ( easy to upgrade to dual nozzles, three nozzles, bioprinter ) 
● All sheet metal strong 3D printer parts, more stable
● 3.0mm aluminum and glass hot bed, flat and solid
● Apply to many fields, such as aerospace, architecture, art, automotive, engineering, jewelry, medicine, manufacturing, product design, education and so on
● With the ability to use both open-source and commercial software, such as Cura, Repetier-Host and Simplify 3D

Specification

General

Brand: Athorbot
Model: Buddy Couple
Type: Complete Machine
Platform board: Aluminum Alloy + Glass
Engraving Accuracy: 100 Microns ( 0.1mm ) 
Nozzle quantity: Double
Product forming size: 210 x 270 x 200mm
Layer thickness: 0.1-0.3mm
LCD Screen: Yes
Print speed: Normal 80mm/s, Max. 200mm/s
Supporting material: ABS,Flexible Filaments,HIPS,Nylon,PC,PETG,PLA,Wood
Material diameter: 1.75mm
Host computer software: Cura,Repetier-Host,Simplify3D
System support: Windows, Mac OS X, Linux

Dimensions and Weight

Product weight: 11.0000 kg
Package weight: 13.5000 kg
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US
Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US


Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US




Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US

Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit Mixed Color Printing- White US

Disclaimer:
1. Please read and follow the user manual carefully before you assemble or operate the 3D printer.
2. Modification and customization of the 3D printer is strictly forbidden. We will take no responsibility for any problems resulting from modifications.
3. Always use the correct AC voltage for your region.
4. Please do not place the the 3D printer near flammable/combustible materials, or any heat sources.
5. Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.

Suggested Products

Customer Reviews

5 out of 5
  • 1
  • 0
  • 0
  • 0
  • 0
See all 1 reviews Write a Review
  • Shortsircut
    Good product
    This 3D printer works quite well, there is absolutely a learning curve to getting the hang of the 2 color head. Of course this being my first 3D printer my learning curve is most likely steeper than someone who had previous 3D printing experience. Shipping was pretty good and everything came undamaged, it was also easy to assemble. One thing I did not expect is that the X,Y, and Z axes do not really know where they are. In other words if every axis is at zero, if you move the table by hand, it still reads zero. It only knows where it is in reference to its original starting point. With all this being said, I am having a lot of fun making things with this printer.

    I would recommend this printer.

    Oct 31,2018

FAQ for Athorbot Buddy Couple Dual Extruders 3D Printer DIY Kit

  • Does Athorbot Buddy Couple 3D Printer DIY Kit support auto leveling function?

    No, it doesn't.
  • What is the temperature rang of the hot bed?

    0 - 110 ℃.
  • What is the input voltage of the printer?

    110 V or 220 V, you can switch the input voltage. Also it is compatible with 100 V, 130 V, 230 V.
  • What is the diameter of the nozzles?

    0.5 mm.
  • Why the prints can not stick on the build platform?

    Please adjust the distance between nozzle and hot bed, the best should be 0.1 mm.
  • Why the temperature of nozzle could not rise continuously?

    Due to the low temperature or other reasons, the temperature of nozzle could not rise continuously and start to print. Please apply a strip of tape.
  • The prints stick hard on hot bed. How can I remove the print project easily and not to damage the plate?

    After the prints cool down, it is not easy to remove. Please reheat the bed to 60 degrees (Control→ Temperature → Bed).
  • What is the language of the display?

    English.
  • Can i upgrade the firmware of Athorbot Buddy Couple 3D Printer?

    Yes, you can.
  • Can i printing mixed color?

    Yes, you can, this is double nozzle printer.
  • Why not extruding enough plastic?

    1. Incorrect filament diameter;

    2. Increase the extrusion multiplier.

    The solution to under-extrusion (not extruding enough plastic)

  • Why there are holes and gaps in the top layers?

    1. Not enough top solid layers;

    2. Infill percentage is too low;

    3. Under extrusion.

    The detail you can read this post:

    Solutions to holes and gaps on the top surface during 3D printing

  • How does 3D printer work?

    In fact, although there are many different brands of 3D printers, they all basic working principle is same: How does 3D printer work?
  • How to debug the heatbed of 3D printer without auto leveling?

    There are many 3D printers that do not have automatic leveling,the platform leveling is very important. Let's talk about how to debug heating platform: How to debug 3D printer’s heating platform
  • How to stop 3D prints from warping?

    When using a 3D printer, the first layer always fails to print, and warps when print several layers. It is really make people desperation, this post will help you to fix the problem: How to stop 3D prints from warping
  • How to choose the right filament?

    When choosing a proper 3D printer filament, we need to consider the different features of its materials:

    Pick the right 3D printer filament

    3D printer filament comparison

  • How to choose a 3D printer?

    We take a look at the key factors to consider when purchasing a 3D printer: 7 things you need to know before buying a 3D printer
  • How to using Cura 3D slicing software?

    Cura is an open source 3D printer slicing application, it is widely used in 3D printing. Let's talk about how to install Cura 3D slicing software and operate it: Cura 3D slicing software installation and operation
  • Why not extruding at start of print?

    1. Extruder was not primed before beginning the print;

    2. Nozzle starts too close to the bed;

    3. The filament has stripped against the drive gear;

    4. The extruder is clogged.

  • Why the 3D printer always overheating?

    1. Insufficient cooling;

    2. Printing at too high of a temperature;

    3. Printing too fast;

    4. Try printing multiple parts at once.

  • How to deal with the 3D printer nozzle jam?

    We will introduce a couple of single steps to help you dealing with this problem: How to deal with the 3D printer nozzle jam
  • How to solve cracking or breaking of layers during 3D printing

    We will discuss some typical reasons and corresponding solutions: How to solve cracking or breaking of layers during 3D printing
  • Why 3D printer details can not be printed out?

    There are several options that allow you to successfully print this subtle detail: Why 3D printer details can not be printed out?
  • I want to print a large object, which 3D printer is better for me?

    We recommended the TEVO Black Widow 3D Printer Kit, because of it's large printing area (up to 370 x 250 x 300mm).

    The detail tips for choosing a 3D printer, you can read this post:

    3D Printer buying guide
  • How to make my 3D-printed models look smooth and shining?

    Acetone Vapor is an easy way to smooth your ABS prints. Please check the specific steps in this guide:

    Acetone Vapor - A great way to make your 3D-printed models look smooth and awesome

  • View More

Customer Q&A

  • All(1)
  • Product Information(1)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

Does this product has autoleveling?

By Ivan May-06/2018 12:00:40

A

Hello Ivan, 
I am sincerely sorry that this machine has no automatic leveling function .

Q

Does this product has autoleveling?

By Ivan May-06/2018 12:00:40

A

Hello Ivan, 
I am sincerely sorry that this machine has no automatic leveling function .

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

1 Questions & Answers View All

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service