Creality3D CR - 10 DIY 3D printer user manual in English

Installation steps guide:

1. Make sure all parts are good and undamaged

2. Connect the portal frame with base platform by four screws

3. Install fixed block and limit switch

4. Wire X-axis, Y-axis, Z-axis

5. Choose the right voltage - 110V / 220V

For Gearbest customers: If you've purchased the Creality3D DIY 3D printer from us, but the user manual doesn't solve your issues, please do not hesitate to get in touch with us. Just fill in the ticket with your questions at our Support Center and send it to us. We will do our best to deal with your problem as soon as possible. We are always happy to help.