12 FAQs of Tablet - boot up, OS switching, activation code
By GB Blog Official 2016-11-02 8897 4
Q: Why my new device cannot boot or start up properly?
A: Please charge your new device for at least 10 minutes or more before first usage; this ensures normal device boot and optimal operation. For devices with removable batteries, ensure they are properly installed before charging.
Q: How to switch between Android and Windows on the dual OS tablet?
A: In usual dual system tablet, there is an Android logo on the mission board, located at the bottom of Windows interface. You can easily switch from Android to Windows by clicking on the logo.
If you're using Android, just swipe down the screen from the top, right side, you will see a changing-to-Windows icon. Tap on it to switch OS.
Q: What can I do if the tablet can not be booted, while the coming logo shows up when charging?
A: 1. It might be because the battery is empty, we advise you to charge it with the original charger over 10 minutes.
2. Press the power button for 30 seconds to force it to boot.
3. For Android OS there might be a problem of software, so you need to press the power button and volume "+" simultaneously to reset factory/flash; for Windows OS, you should flash.
Q: Why is there no response after the keyboard is connected to the tablet?
A: 1. You need to make sure whether the keyboard is compatible with the tablet.
2. Make sure you have plugged the cable into the docking slot correctly.
3. You need to reboot your tablet after connecting it to the keyboard.
Q: Why does the tablet always shut down by itself?
A: This might happen because of viruses, please try again after scanning and removing viruses by some anti-virus program.
Q: What is the activation code of my device?
A: Now all systems are active, so there is no need to ask for an activation code. Your device can be used directly after you connect it to WiFi.
Q: Why the SD card can only be read by Android OS but not by Win10 OS?
A: If you want the SD card to be read on Windows10, you first need to remove your SD card, switch to Windows10, turn off your device and then reboot.
Q: Why can it only recognize some TF cards whose capacity is smaller than the one in the description?
A: If the systems cannot read the TF card, that might be because the tablet only recognizes some specific kinds of TF card. If only Android can read it and Windows cannot, there must be a problem of BIOS and you need to flash BIOS.
Q: How to restore to factory default settings?
A: For Android OS you need to press volume "+" and power button simultaneously. For Windows OS you need to enter "settings" and select "backup and restore".
Q: Why is there no response when my new device is charging?
A: It might be because it was not switched off after checking and ran out of power during shipping. Press the power button for 30 seconds to turn it on after you have connected it to the charger.
If it doesn't work, please try to change USB cable and charger. If all the above instructions don't work and your tablet still won't charge properly, that might be a trouble of software in your equipment and you need to flash it.
Q: Can this item be shipped to my country?
A: We can deliver orders to any country. For a detailed explanation about each shipping method, destination and approximate delivery time, please check our website: https://www.gearbest.com/about/shipping-methods.html
|You may also want to read:|
|Master Windows | 3 ways to shut down Windows 10 FAST|
|How to stop Windows 10 laptop entering sleep mode|
For the purpose of this new article, the featured image(s) were sourced from the internet. For any issue, please contact us, and we will deal with the matter promptly.
2017-03-16By GB Blog Official
2018-05-02By Cheryl Evans
2018-02-13By Zim Watson
2017-02-17By GB Blog Official
2017-02-28By Zim Watson
2017-02-18By Zim Watson