Alfawise Q203 Smart Door Lock FAQ
By Steve Lowry 2019-03-18 3092 0
Alfawise Q203 smart lock features
● Confirm the thickness of the door:
Make sure that your door is made of wood or steel between 40 and 100 mm thick.
● Confirm the size of the lock:
Make sure the size of the lock and lock body installed before. If the size is different and the Q203 lock panel can cover the previous hole position, it needs to be re-drilled to install.
● Confirm the direction of the door opening:
Make sure that your door opens to the left or the right. There are two kinds of door locks, left and right. Be careful not to buy them wrong.
Yes. There are two ways to unlock a lock remotely:
● APP generates dynamic password unlocking:
Dynamic passwords can be generated in APP and unlocked for visitors.
● App remote unlock:
When visitors visit, they can enter "4"+ "#" on the door lock. At this time, as long as the mobile phone is connected to the internet, the APP door lock interface will appear "click remote open door", and then you can click it to unlock it.
● After the dynamic password is input, you should press "#" to make it valid.
● The effective time of dynamic password is 5s after it is generated. After 5s, it will be invalid and need to be regenerated. Dynamic passwords also support virtual passwords.
There are three kinds of alarms:
● Enter password five times;
● Low power alarm;
● Anti-prying alarm.
Alfawise Q203 Smart Door Lock frequenctly asked questions
● First connect the mobile phone to the WIFI at home, open the "Tuya Smart" APP, click on the "+" in the upper right corner, then click on "All devices" and select "Door Lock".
● Touch the keyboard of the door lock and input "3"+ "#" continuously. After verifying the administrator, the "8" key flickers, that is to say, it enters the distribution network mode.
● Follow the APP prompt and enter the WIFI password, that is to say, complete the task of adding connections.
Note: In APP "All Equipment", choose "Door Lock" instead of "Intelligent Door Lock", where "Door Lock" is WIFI Door Lock, and "Intelligent Door Lock" is ZigBee Door Lock.
Firstly, you should complete the drilling according to the requirements of the door lock punching diagram, and then install the door lock according to the following three steps:
● Install the lock body.
First of all, please confirm the direction of the lock tongue, confirm and adjust the direction of the lock tongue according to the direction of the door lock, install the entry and lock the screw.
● You need to install the front panel of the lock.
The product packaging box contains square steel and connecting pillars of different lengths. The square steel and connecting pillars of different lengths are selected according to the thickness of the door. They are inserted into the front panel of the lock and then set into the entry.
● Install the rear panel of the lock.
Connect the front panel wiring to the back panel, select the appropriate size of square steel and connect the square steel, lock two fixed screws to complete the installation.
Note: There is a screw position inside the battery cover box.
For Gearbest customers: If you've purchased Alfawise Q203 Smart Door Lock from us and still have problem after reading this post, please do not hesitate to get in touch with us. Just fill in the ticket with your questions at our Support Center and send it to us. We will do our best to deal with your problem as soon as possible. We are always happy to help.
2020-12-01By Cheryl Evans
2017-03-16By GB Blog Official
2019-08-27By Joe Horner
2019-03-04By Steve Lowry
2017-02-28By Zim Watson
2016-11-03By GB Blog Official
Prev article:How to repair headphones without a soldering?
Next article:How to unlock Huawei phone when forgot password