How to add or remove devices from Xiaomi mijia multimode gateway?
By Joe Horner 2020-01-01 2144 4
How to add Zigbee sub-devices with Xiaomi mijia multimode gateway?
Step 1: Enter the interface of Mijia App-Xiaomi Intelligent Multimode Gateway (or custom name)- sub-device.
Step 2: Then click the "+" button in the lower right corner, and select the device to be added.
Step 3: At this time, the Xiaomi multimode gateway will enter the 60-second sub-device pairing state. You only need to immediately add the device at the sub-device side according to the prompt of the interface, and complete the device addition by pressing the reset key for more than 5 times.
In addition to the 41 sub-devices of the Xiaomi / Mijia / Aqara brand listed in the list, it also supports all the intelligent door locks, ceiling lights and other Zigbee-based transmission products of the Aqara brand. When in use, you can also click on any device to make the Xiaomi multimode gateway advanced into the sub-device to match the response status, and then complete the verification according to its product description at the sub-device side. It can also be added, and the multi-mode gateway will issue two long beeps after successful operation.
How to delete Zigbee sub-devices from Xiaomi mijia multimode gateway?
Step 1: You can delete Zigbee sub-devices from the list of Mijia App or multi-mode gateway sub-devices.
Step 2: Or you can unbind them directly by pressing the reset key for more than 5 times.
Step 3: After successful unbinding, the multi-mode gateway will emit three short beeps.
How to add BLE sub-devices with Xiaomi mijia multimode gateway?
Step 1: Make sure that the Xiaomi multimode gateway and BLE sub-devices are turned on and added to the list of Mijia App devices under the same account.
Step 2: The Xiaomi multimode gateway will automatically search for and identify BLE sub-devices within 10-15m nearby, and there is no need to manually add or remove them.
You can also enter the interface of Mi Home App "my Bluetooth Gateway" Xiaomi Home Intelligent Multimode Gateway (or custom name) to view the Bluetooth gateway devices that have been identified and connected to the cloud. However, if there are multiple BLE sub-devices in your home, and the locations are long and scattered from each other, it is recommended to form a Mesh gateway with other Bluetooth gateways to increase the coverage and allow more Bluetooth devices to connect to the external network and support scene linkage.
Can the previous Zigbee gateway add new Zigbee 3.0 devices?
Because the Zigbee 3.0 transport protocol used in Xiaomi multimode gateway is backward compatible with the previous Zigbee 1.2 technology, it is perfectly compatible with all current and early Zigbe sub-devices.
On the contrary, the original Mijia multi-function gateway, Mijia empty set partner 2, Aqara gateway, Aqara intelligent camera G2 and other devices can not support the subsequent introduction of Mijia light sensors, all the new products based on Zigbee 3.0 transmission can only be solved by replacing the gateway that supports Zigbee 3.0 transport protocol.
For Gearbest customers: If you've purchased Xiaomi multimode gateway from us and still have problem after reading this post, please do not hesitate to get in touch with us. Just fill in the ticket with your questions at our Support Center and send it to us. We will do our best to deal with your problem as soon as possible. We are always happy to help.
● Over 300,000 products
● 20 different categories
● 15 local warehosues
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
● Boleto Bancario via Ebanx (for Brazil)
● Unregistered air mail
● Registered air mail
● Priority line
● Expedited shipping
● 45 day money back guarantee
● 365 day free repair warranty
● 7 day Dead on Arrival guarantee (DOA)
2019-04-17By Linky Johnson
2020-03-30By Joe Horner
2019-08-26By Joe Horner
2020-03-18By Lydia Scott
2018-07-03By GB Blog Official
2020-03-17By Joe Horner