How to assemble Alfawise U20 3D printer
By Steve Lowry 2018-05-21 9250 0
1. Taking out all Alfawise U20 parts
Fix the portal frame on the base platform with four screws (M5*20).
2. Installing fixed block and limit switch
The fixed block with limit switch is installed on the left side, and T-type fixed block is installed on the right side.
3. Wiring Alfawise U20 3D printer
1. X-axis motor; 2. Y-axis motor; 3. Z-axis motor; 4. Extruder motor.
①: X-axis limit switch ②: Y-axis limit switch ③: Z-axis limit switch
Material limit device. Use M2 screws to fix the absence of material when mounting it.
4. Install Alfawise U20 filament bracket.
The assembly of Alfawise has been completed, it is really easy and quick, now you can enjoy your 3D printing.
|You may also want to read:|
|Cura 3D slicing software installation and operation|
|How to operate Alfawise U20 3D printer screen|
|How to stop 3D prints from warping|
|How to update Alfawise 3D printer firmware?|
For Gearbest customers: If you've purchased Alfawise U20 3D Printer from us and still have problem after reading this post, please do not hesitate to get in touch with us. Just fill in the ticket with your questions at our Support Center and send it to us. We will do our best to deal with your problem as soon as possible. We are always happy to help.
2020-12-01By Cheryl Evans
2019-08-27By Joe Horner
2017-02-18By Zim Watson
2019-03-04By Steve Lowry
2019-08-21By Sigismondo Eisenhower
2017-02-28By Zim Watson