How to change and replace Xiaomi M365 /M365 Pro inflatable or solid tire?
By Sigismondo Eisenhower 2019-10-17 8623 1
How to change and replace Xiaomi M365/ M365 Pro inflatable tier?
Before explaining to you, step by step, how change the tire of Xiaomi electric scooter , let's see what are the necessary requirements:
● Allen wrench
● 18mm wrench
● Silicone paste
Once you are ready, you can replace your electric scooter tier by following these steps:
Step 1: Remove the red protective stickers
Be careful not to break them, as they protect the inside of the screws, and if water gets in they can rust.
Step 2: Remove the protective cap and screws.
Step 3: Turn the scooter over to the other side and repeat the Step 2.
We recommend that you have the scooter on the table, with the wheel on the outside, and make as much force as possible by squeezing down to remove the nut. Another option is to put the screwdriver, and pliers held to the handle of the screwdriver, and make force with the pliers.
Step 4: Lift the cover and loosen the nut below it using a wrench
Step 5: Disassemble the wheel and inflatable tire.
It's time to remove the wheel and get to the bedroom. For this, it is highly recommended to have some wheel changers, which we have in our store. Another more home-made option that can also work, is to use some spoons, making pressure in the external part of the tire, with care.
Step 5: Change of inflatable tire
Step 6: Reassembly of the complete wheel
Back to the whole process, it's time to put the wheel in place, and put the screws one by one, in the order in which we remove them. Be careful to tighten all the screws correctly, it will not be that the wheel loosens in the middle of a journey.
Before getting on the scooter again, make tests, move the handlebars and test the scooter at a low speed, so you can check that everything is OK.
How to change Xiaomi M365/ M365 Pro solid tire?
The steps for changing to a solid wheel are the same as those mentioned above for inflatable wheels, only the final step changes.
Step 1: Add some lubricant on the rim of the wheel.
Step 2: Soften the solid wheel by fill it in 100℃ water 10 minutes or heat it in the microwave for three minutes, and check in after every minutes
Step 3: Once the wheel is soft enough, remove it and fit the rim into it. Let it cool for five minutes.
Step 4: Fasten the nut and the other screws (while replacing the plastic cover) on both sides. Also, make sure that you return the red labels.
After long time riding, you may find that the flat tire of Xiaomi M365/M365 Pro electric scooter. You should pumping up it. But how to know the tire pressure is suit for me? Don’t worry, the following table will help you.
How to measure Xiaomi M365/M365 Pro electric scooter tire pressure?
To get the right pressure in your tires, you must have a pressure gauge. This shows you the pressure inside your tires. The manometer generally has two units of measurement on its display, the BAR and the PSI.
Here is our table to summarize the optimal pressure to put in your Xiaomi M365/M365 Pro scooter tires, according to your weight.
35-40 psi / (2,4-2,7 bar)
40-50 psi (2,7-3,4 bar)
40-45 psi (2,7-3,1 bar)
45-55 psi (3,1-3,8 bar)
45-50 psi (3,1-3,4 bar)
50-60 psi (3,4-4,1 bar)
|You may also want to read:|
|Xiaomi Carrobot smart projection car HUD (Head Up Display) Bluetooth edition FAQ|
|Does GoPro Hero 8 suitable for taking picture or as vlog camera?|
|How to make TimeLapse with GoPro Hero 8?|
● Over 300,000 products
● 20 different categories
● 15 local warehosues
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
● Boleto Bancario via Ebanx (for Brazil)
● Unregistered air mail
● Registered air mail
● Priority line
● Expedited shipping
● 45 day money back guarantee
● 365 day free repair warranty
● 7 day Dead on Arrival guarantee (DOA)
2020-12-01By Cheryl Evans
2019-04-17By Linky Johnson
2017-11-17By GB Blog Official
2018-04-24By Matthieu Andre
2017-11-24By Adeline Belluz
2016-11-03By GB Blog Official