How to choose headphones?
By Jase Picozzi 2020-01-07 856 170
What is most easily ignored due to distortion is the low level of performance of the "sound field", that is to say, the sense of listening at the scene is not clear. An undistorted sound source can identify or even close your eyes as if you can "see" the sound source and location of the scene, giving you an immersive feeling. So if you pursue the bass sound effect, you will lose a lot of sound details, and the on-the-spot restoration is very unclear. The sound quality of the new headphones sounds very average, without publicity, are we being deceived?
To answer this question, first of all, let's talk about what is meant by "burning headphones". The main purpose of the earphone cooker is to make the mechanical system of the earphone "aging" rapidly. The diaphragm in the earphone is fixed on the shelf of the headphone. Theoretically, the diaphragm movement should be a vertical movement, which requires greater compliance at the edge of the diaphragm. This is where the cooker is. The diaphragm edge of the new headphone is relatively tight, the elasticity is big but the compliance is small, the earphone is to let its edge activity open, the sound is not so "tight". The "cooker" of headphones is actually cooking the diaphragm folding ring, and the mechanical compliance of the new earphone diaphragm folding ring is poor, resulting in a relatively large distortion. After a period of use, the compliance will gradually improve, and the distortion will gradually drop to the normal level.
Earphones are new headphones do not use too much volume to listen to electronic music, so as not to damage the unstretched headphone folding ring, as long as it is not rock electronic music, you can listen to some soft music or soft music by the way. Just listen to it naturally, don't listen deliberately, or it may damage the headphones. At this point, I wonder if it has been solved?
When choosing headphones, you should choose the one with lower impedance, right? the impedance of
Headphones varies with the frequency of the audio signal they play, and the impedance of headphones is generally the highest at low frequencies. It is easy to understand that the low-frequency sound field starts all the diaphragms of the headphones to have the feeling of heavy bass, so the low-frequency attenuation of the playback source used is more significant. So the headphones we bought have insufficient thrust to play subwoofer, which represents the maximum undistorted tipping point for this source. It would be nice to note that the impedance of the headset (32-50 ohms) is about this range when buying headphones. For most headphones, increasing the output impedance with other physical components unchanged will make the sound richer, which is the reason for the high impedance of many high-end headphones.
Careful friends will find that when you plug the headphone into the power-on ear amplifier, you will hear the noise of electric current shock. The noise of high impedance headphones is relatively small in the same current impulse. When there are some extreme and unexpected conditions, such as amplifier problems, high impedance headphones have better tolerance and will not be burnt out.
Thus it can be seen that when the impedance of the selected headset is large, the device may not be able to push or the sound quality may be poor; when the impedance of the headset is small, the headset will break sound or even burn out. Therefore, when choosing to use headphones, we should make a reasonable and correct choice according to the actual situation and according to the equipment that is not.
● Over 300,000 products
● 20 different categories
● 15 local warehosues
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
● Boleto Bancario via Ebanx (for Brazil)
● Unregistered air mail
● Registered air mail
● Priority line
● Expedited shipping
● 45 day money back guarantee
● 365 day free repair warranty
● 7 day Dead on Arrival guarantee (DOA)
2019-04-17By Linky Johnson
2020-03-13By Joe Horner
2017-02-28By Zim Watson
2020-03-10By Joe Horner
2017-06-20By GB Blog Official
2020-03-05By Joe Horner
Next article:How to use iPhone headphones? [Detailed Explanation]