How to Clean Roborock S5 Robot Vacuum Cleaner?
By Lydia Scott 2020-03-19 1447 0
How to Clean Roborock S5 Main Brush?
Step 1: Turn the vacuum cleaner around, hold the special clips on both sides and remove the brush guard.
Step 2: Pull out the main brush. On both sides, remove the supports of the main axis of the brush and remove the hair that could wind on its main axis.
Step 3: Using a special auxiliary device(included in the basic equipment) for cleaning the brush of the vacuum cleaner, remove the hair wrapped around the brush.
Step 4: Install the main brush back into the vacuum cleaner, securely install and secure the brush guard.
Attention: for optimal cleaning results it is recommended to change the main brush once every 6-12 months.
How to Clean Roborock S5 Dust Collector?
Step 1: Open the main top panel of the Roborock S5 vacuum cleaner, hold down the latches and remove the dust bag.
Step 2: Open the dust bag in the place where the arrow marks are located, discard the debris.
How to Clean Roborock S5 Filter?
Step 1: Open the Roborock dust bag at the point, where the arrow marks appear.
Step 2: Fill the dust bag with a small amount of water, close it and shake it. After this, pour out dirty water, repeat the procedure again. Now your filter is clean.
●Rinse the filter with clean water without adding any detergents.
●When rinsing the filter, do not use brushes or wash them with hands. It's enough just to rinse the filter.
Step 3: Remove the Roborock filter, shake it off to remove any excess moisture, allow it to dry out in a well-ventilated, sunny location until it dries completely, after which the filter can again be used.
●It is strongly recommended to dry the filter before using it (at least 24 hours to dry the filter).
●We recommend that you use two filers in turn.
How to Clean Roborock S5 Slide Brush?
Step 1: Turn the vacuum cleaner to unscrew the screw.
Step 2: Remove and clean the side brush.
Step 3: Replace and tighten the screw.
Attention: for optimal cleaning results it is recommended to change the side brush every 3-6months.
How to Clean Roborock S5 Attachment?
Step 1: Remove the attachment from the wet cleaning module.
Step 2: Rinse the attachment in water and allow it to dry.
●It is strongly recommended to rinse the attachment for wet cleaning, otherwise dirty water from the module can get into the filter.
●If it is too dirty, this can affect the efficiency of its sliding on the floor. Please rinse the attachment, and then use it.
●For optimal cleaning results, it is recommended to change the attachment for wet cleaning once every 6-12 months.
How to Clean Roborock S5 Filter Components?
Step 1: Remove two filter components(right and left) with your own hand.
Step 2: Install new filter components, make sure they are securely fixed.
Caution: It is recommended to change the filer components every 1-3 months, depending on the level of water contamination and the frequency of use of the device.
How to Clean Roborock S5 Wheels?
Step 1: Turn the Roborock vacuum cleaner to remove the wheel.
Step 2: Clean the wheel of excess dirt and hair.
Step 3: Install the wheel in the Roborock vacuum cleaner.
Caution: To clean the wheel, use clean water, dry it and install it in the device.
For Gearbest customers: If you've purchased Roborock robot vacuum cleaner from us and still have a problem after reading these tips, please do not hesitate to get in touch with us. Just fill in the ticket with your questions at our Support Center and send it to us. We will do our best to deal with your problem as soon as possible. We are always happy and willing to help.
● Over 300,000 products
● 20 different categories
● 15 local warehosues
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
● Boleto Bancario via Ebanx (for Brazil)
● Unregistered air mail
● Registered air mail
● Priority line
● Expedited shipping
● 45 day money back guarantee
● 365 day free repair warranty
● 7 day Dead on Arrival guarantee (DOA)
2017-03-16By GB Blog Official
2020-05-08By Joe Horner
2017-02-18By Zim Watson
2020-05-05By Joe Horner
2018-07-03By GB Blog Official
2020-05-06By Joe Horner