How to remove the headphone mode in your phone when there is no headphone connected?
By Giovanni Galluccio 2020-01-06 1812 490
Step 1. If you do not use the headset, it means that the resistance contact in the air of the current headphone is bad. The resistor has the function of recognition and will automatically enter the headset mode after the headset is inserted. If the headphone is unplugged, the system will automatically exit the headphone mode;
Step 2. You can try to pull it out repeatedly, which may be due to poor contact between the contacts in your headphone hole.
Step 3. You can use cotton swabs or tweezers to carefully clean the headphone hole. It may be that the metal contact in the headphone hole is oxidized after using it for a period of time. Use sandpaper to wipe the interface part;
Step 4. Check whether Bluetooth mode is turned on and connected to the Bluetooth audio device. It may be because the connected Bluetooth device is connected again, so the phone determines that it is using Bluetooth to output audio.
Step 5. If the above methods try to rule out that you can't exit the headphone mode, it may be that your headphone hole is faulty and you can only find a repairman to check and repair it.
● Over 300,000 products
● 20 different categories
● 15 local warehosues
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
● Boleto Bancario via Ebanx (for Brazil)
● Unregistered air mail
● Registered air mail
● Priority line
● Expedited shipping
● 45 day money back guarantee
● 365 day free repair warranty
● 7 day Dead on Arrival guarantee (DOA)
2017-02-18By Zim Watson
2020-03-04By Joe Horner
2018-07-03By GB Blog Official
2020-03-13By Lydia Scott
2017-12-11By Adeline Belluz
2020-03-03By Joe Horner
Prev article:How about JBL Bluetooth speakers?