How to Replace SONY WF-1000XM3 TWS Earbuds Battery?
By Joe Horner 2020-05-08 27429 1
SONY WF-1000XM3 Battery Replacement Guide
You can perform the steps below to change your SONY WF-1000XM3 earphones battery:
Step 1: Open the SONY WF-1000XM3 headset cover.
The SONY WF-1000XM3 is divided into left and right ears, and each headset has the same battery built into it. And the left and right ears use a snap-type design, as long as a little effort can open the upper cover of the headphone.
The inner side of the upper cover of the SONY WF-1000XM3 headset, the large circle on the top is the touch control position, and the black foam in the middle is the noise reduction microphone pick-up hole. There is a dustproof patch in the middle of the headset, corresponding to the noise reduction microphone.
Step 2: Remove the two screws from the headset to separate the motherboard from the bottom shell.
Step 3: After removing the screw, you can see the battery on the back of the motherboard.
Installed inside the SONY WF-1000XM3 earbuds is a button battery, made by VARTA, with prices ranging from 40 to 60RMB on the market. However, there are alternative batteries of the same specification on the market.
The above is the battery replacement method for SONY WF-1000XM3 headphones, which is very easy to operate. But before you do it, make sure you've bought a button battery for SONY WF-1000XM3.
● Over 300,000 products
● 20 different categories
● 15 local warehouses
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
● Boleto Bancario via Ebanx (for Brazil)
● Unregistered air mail
● Registered air mail
● Priority line
● Expedited shipping
● 45 day money back guarantee
● 365 day free repair warranty
● 7 day Dead on Arrival guarantee (DOA)
2017-03-16By GB Blog Official
2018-01-17By Adeline Belluz
2018-10-19By Zim Watson
2017-02-17By GB Blog Official
2018-04-24By Matthieu Andre
2017-11-24By Adeline Belluz