My robot vacuum cleaner gets lost
When your robot is running out of power, it tries to go back to the charging base. Sometimes the cleaner can't quite make it all the way back and sometimes it may get lost or can’t find it. Try the following steps to make it find its way home.
1) Place the charging base against a wall, near an electrical outlet. Make sure the robot can "see" it from various places in the room: don't put it behind or under the furniture, long and narrow hallway, closed-off areas. Avoid putting it under constant direct sunlight. If you have thick carpeting, check that the charging base isn't tilted as this can interfere with docking.
2) Place the base in an open area and far away from high-power electrical appliances. The maximum detection distance is 2 meters in front and 1 meter at sides.
3) Keep the charging dock and charging electrodes clean.
4) Reboot the cleaner and try a few more times.
If the problem persists, please contact our after-sale service.
|You may also want to read:|
|Tips to improve the cleaning performance of your vacuum cleaner|
|A complete FAQ list of the vacuum cleaner|
For the purpose of this new article, the featured image(s) were sourced from the internet. For any issue, please contact us, and we will deal with the matter promptly.
1 / 0
2017-06-01 By Zim Watson
2017-01-24 By GB Blog Official
2017-01-15 By GB Blog Official
You might also like:
2017-02-18 By Zim Watson
2017-04-20 By Zim Watson
2017-02-19 By Zim Watson