Solve mini RC 901 helicopter propeller charging flying issues
By Zim Watson 2017-05-11 2496 2
|The indicator light lights but the propellers don't spin.|
|The helicopter keeps on spinning in circles.|
|After installing the battery, the helicopter cannot launch.|
The indicator light lights but the propellers don't spin.
1. The most possible reason should be the helicopter doesn't pair with the remote controller well.
You can observe the indicator light condition: If the two devices are connected successfully, the indicator light on the both devices won't flash but just keeps lighting. If the light still flashes, it means the two devices are not paired well. Please refer to the user manual (on the product package box back) to pair them again.
2. Maybe the helicopter's battery is going to run out, or the remote controller's power will drain.
So simply charge the helicopter on the remote controller or change other two new pairs of battery for the controller.
3. When all the solutions are failing, it should be a hardware issue.
Please contact the after-sales service for more help. Alternatively, you can take it to a local drone or digital product fixing store to check and repair.
The helicopter keeps on spinning in circles.
In fact, it's a normal phenomenon for most of the users, because this kind of 2-axis helicopter is really hard to control, so that it's easy to keep on spinning in circles. Only after you have rich experience of playing with the 2-axis helicopter, you can master it and fly it very stably. Besides that, if we met this problem, we can also:
1. Fine tune the helicopter's direction.
When the helicopter keeps on spinning in clockwise, you can press the L button on the remote controller to fine tune the direction to the right. Please click the button for several times until the helicopter can fly straightly. If the helicopter keeps on spinning in counterclockwise, please press the R button for several times until it can fly straightly. After that, the helicopter can fly to left and right side normally.
2. Check the propellers are installed in the right locations.
You can see the propellers' shape and spinning direction are different. So please install the propellers as the below picture, otherwise, it will fly in a wrong way, therefore, the "spinning in circles" problem might happen.
After installing the battery, the helicopter cannot launch.
1. Maybe the helicopter's battery has no power.
Please charge the helicopter on the remote controller. There is a USB charging end under the helicopter's bottom, and on the remote controller, there is a USB charging port. You need to insert the helicopter's USB charging end into the remote controller's USB port, and turn on the controller's power button to charge the helicopter's battery.
2. Check whether you have turned on the remote controller's power.
When you turn on the controller's power button, the indicator light of it will light and flash. When you charge the helicopter's on it, the indicator light on the remote controller will extinguish. Only when the helicopter's battery is fully charged, the indicator light will light.
For more specific instruction, you can watch this Mini RC 901 helicopter using guide video to know more.
For Gearbest customers: If you've purchased the Mini RC 901 helicopter from us, but this guide doesn't solve your issues, please do not hesitate to get in touch. Just fill in the ticket with your questions at our Support Center and send it to us. We will do our best to deal with your problem as soon as possible. We are always happy to help.
2018-01-17By Adeline Belluz
2019-11-12By Sophia Windsor
2017-06-20By GB Blog Official
2019-11-11By Sigismondo Eisenhower
2017-12-11By Adeline Belluz
2019-11-13By Adan Flannigan
Prev article:Troubleshooting the NO.1 D5 Bluetooth smart watch
Next article:37 Degree L18 guide | Solutions to common problems