Home> How To> Tips to improve the cleaning performance of your vacuum cleaner

Tips to improve the cleaning performance of your vacuum cleaner

by GB Blog Official 2016-10-28 190 0

Do you know how to improve the cleaning performance of you cleaning robot? Here are several tips for you to make the cleaner works like new.

Dropping dust / dirt while cleaning

Check whether the dust bin is full. You should empty the dust bin before every use, to ensure better airflow and efficient cleaning.

How to put the dust bin into the robot?

Take out the mop cloth holder - put the dust box in the robot - put away the handle - close the surface cover

When should I replace the HEPA filter?

This depends on the frequency of use and the cleanliness of the filter. The HEPA filter is generally replaced every two-three weeks. If it is not dirty, it can be replaced every six to eight weeks.

Check whether the HEPA filter is dirty / clogged. If so, suction power is reduced. Please remove the HEPA filter, and clean it with warm water, then place it back in the filter slot. If the HEPA filter is over 6 months, you’d better replace it with a new one.

Remember to:

● Fully charge the robot, when the power of new robot is insufficient, and suction power is weak.

● Pick up large items and keep the area to be cleaned open.

● Clean side brushes, bristle brushes and sensors regularly.

Flick dust / debris around

The side brushes, which are designed to pull dust / debris toward the vacuum intake, will sometimes flick dust / debris away. This is normal, and they will be cleaned in subsequent passes by the robot.

You may also want to read:

A complete FAQ list of the vacuum cleaner

How to choose a suitable iLife robot vacuum cleaner

For the purpose of this new article, the featured image(s) were sourced from the internet. For any issue, please contact us, and we will deal with the matter promptly.