Vaper's guide: choose the right battery for your VV/VW mod
We help you to choose the right battery for VV/VW mods based on usage and discharge.
Understanding the battery
The battery is a critical part of the e-cigarette, supplying power to heat the resistance wire and then vaporize the e-juice. The cell can be divided into two types:
● "Capacity" type which can carry more capacity and provide a longer lifespan.
● "Power" type that has larger output and relatively lower capacity.
With the development of e-cig technology, box mods started to gain market share. Now, virtually all box mods feature short-circuit protection and voltage protection, so the user no longer has to worry about cell performance.
However, if you don't use a compatible battery with your device, then you may not reach the full potential of the device leading to lost performance.
Consideration of Usage
If you use a rebuildable dripping atomizer (RDA), you should buy the "Capacity" battery type. 3000mAh cells provide a longer battery life than 2000mAh cells.
Discharge is also less than 5A which is perfect for using "Capacity" cells. Conversely, if you were to use "Power" cells instead, the device may lead to reduced usage time and waste the high current.
What kind of cells should be used with a vapor cloud tank? Choose "Power" cells.
If the output current is too low for the wattage needs, the chip will lower the voltage to protect the device.
Example: if the mod has 80W output wattage but the battery cannot reach that level, the chipset will lower the voltage until the battery is supported. This means you cannot experience vaping at 80W.
Consideration of discharge
According to Ohm's Law (I = U/R, Amps = Voltage/Resistance), you could get the current from the resistance of atomizer coil head.
For 3.7V (battery voltage), 0.5ohm (atomizer coil head resistance), you would find that it requires a 7.4A current. Therefore, the cell with discharging above 7.4V is suitable for this device. If the resistance is lower, then it needs higher current to match.
Last but not least, please don't let over-volt your mod or expose it to over-voltage conditions. The higher the voltage, the more dangerous it becomes.
Vaping safety is always the most important consideration.
|You may also want to read:|
|Vaper's guide: kanthal vs stainless steel vs nichrome vape wire|
|10 common user errors the most vapers will meet in e-cig|
|4 effective ways to maintain your vapor device|
For the purpose of this article, the featured image(s) were sourced from the internet. For any issue, please contact us, and we will deal with the matter promptly.
2017-08-08 By GB Blog Official
2017-07-24 By GB Blog Official
2017-07-12 By Zim Watson
2017-07-06 By Zim Watson
Prev article: Flying High | 4 simple tips for awesome RC Night Flying
Next article: How to fly aircraft like a Pro - for beginners
You might also like:
2017-02-19 By Zim Watson
2017-04-20 By Zim Watson
2017-04-17 By Zim Watson