XGIMI projector | How to fix no signal during the HDMI connection
By Steve Lowry 2018-10-31 10538 0
Solutions for no signal after connecting to HDMI:
1. First of all, switch the signal source of the projector to the corresponding HDMI signal source mode. Do not switch mistakenly between HDMI1 and HDMI2. HDMI2 is recommended.
2. Check if the HDMI cable is connected properly. Some HDMI cables are one-way outputs. You need to adjust the ends of the cable and try again.
3. If there is still no signal, you can restart the computer and try again. Or you can try connecting HDMI to the TV. There are also some DVD players that need to be switched to HDMI on the DVD remote control.
4. The desktop is relatively simple. In general, it will start to work after connecting the HDMI cable. The laptop is a little more complicated. Go into the laptop graphics card control panel to set up the laptop's dual-display output or press the combination keys FN + F (F represents a key between F1-F12, and it varies from brand to brand.) to switch the video output signal of the laptop. If the entire above are correctly operated, there is still no screen display. Then there may be a HDMI cable not being contacted well. You can replace it with a new one to try again!
5. The screen displays, but it is incomplete. You can first adjust the resolution to 1280 * 800 (the best resolution of the projector), then put the mouse on the projector, press the left button and hold down, then pull down, so you can see the full screen.
6. Don’t plug one end of the HDMI cable into a separate graphics card, while the other end to the integrated graphics card. If so, the screen won’t as well.
7. You can use win + P to switch pictures.
8. If the screen has displays, but it only displays the desktop, without icons. That’s because it is set up as an extended mode. You can switch it to copy mode with the combination keys win + P.
9. Finally, you can try switching the HDMI version from 2.0 to 1.4.
|You may also want to read:|
|How to connect your Mac to a projector?|
|How much projector brightness do you need?|
|XGIMI CC Aurora Mini Portable Projector: simple and powerful|
2019-08-26By Joe Horner
2018-10-19By Zim Watson
2017-02-18By Zim Watson
2017-11-17By GB Blog Official
2018-07-03By GB Blog Official
2017-11-24By Adeline Belluz
Prev article:The ultimate guide to choosing a drone's memory card
Next article:How to select an appropriate DVR?