Live Chat
  • One stop service: solve all your problems
  • Orders Tracking and shipped out notification
  • More campaigns, even more discounts!
  • Need help before making an order?
  • Chat with us in real-time.
  • For Aftersale issues, just submit a ticket. We will reply within 24 hours.
  • Multi-language service
  • 24/7 support available
Hi! Log Out Log In SIGN UP
Home > How To > Xiaomi air purifier dismantling and fan-cleaning
Xiaomi Up to 50% Off
Xiaomi air purifier dismantling and fan-cleaning

Xiaomi air purifier dismantling and fan-cleaning

By  Steve Lowry 2018-11-10 22356 0

Xiaomi air purifier can effective adsorb of formaldehyde, removal of the second hand smoke, dust, filter PM2.5 provides health space for you. Provides comfortable living / learning / office environment for you and your family . How to maintain it? How to clean the fan?


Unplug the power, open the back cover and take out the filter. There are a lot of dirty things on the filter.




Then turn the router over, remove the base, screw down four rubber buttons, and screw down four screws.




Start removing side panels below, which are two relatively narrow pieces, one word screwdriver or plastic pry bar. Be careful to pry it open without too much effort.




From the top to the bottom, but the last two are really hard to drive, and you need to find a long, slender screwdriver, and you plug it in and crack it, and there's no way to take a picture, and I'm sorry, but there's time to catch up.


In addition to the latches on both sides, there are two screwdrivers on the fan divider that can be inserted downward with one word. When you open it, you're going to have to use it, and if you're not careful, you're going to break it, because you have a card on the head, and you can pull it off so you can take off the side board.


Gearbest your best shopping choices


Now you can remove the fan partition with four screws, according to the position on the drawing to pry open the buckle, up a drag can take down the partition. Note that there is a protective switch on the divider, which is the one that stops when you open the rear panel and the phone receives a notification that the door is open. There's two threads here, pull it out.


Now you can remove the large boards on both sides. Next, pull out all the connecting wires. There is a small buckle at the end of the thread. Just press down and pull it out. Now remove the fan cover, unscrew the plastic cap and remove the fan blade.




Take off the blade and see the dead screw. Notice that there are three screws with the combination gasket twisted on the motor inside. These seven screws are different. When got here, you can disassemble the four columns pillars. Find a pair of pliers to unscrew the nut fan and take it off. Start washing and brushing.


Clean the fan


Finally, restore installation, install the lower cap.



For Gearbest customers: If you've purchased Original Xiaomi Smart Mi Air Purifier from us and still have problem after reading the user manual, please do not hesitate to get in touch with us. Just fill in the ticket with your questions at our Support Center and send it to us. We will do our best to deal with your problem as soon as possible. We are always happy to help.


 You may also want to read:
 How to connect Xiaomi Mi air purifier to a phone via Mi Home
 How does a Xiaomi smart Mi air purifier really work?
 Xiaomi Pro air purifier user manual in English
  Xiaomi Mi water purifier user manual in English


Gearbest ROIDMI 3S vs ROIDMI 2S car charger Z Gearbest find out Mi phone IMEI  number

Prev article:Three most important items of hiking equipment you need to know!

Next article:Course on aircraft aerial photography methods

You might also like: