Hangjia GX680H chassis review: high-looking E-ATX chassis
By Hyacinthia Zaitlin 2020-02-03 974 14
GX680H chassis standard with three 12CM color RGB fans, the color is fixed can not be adjusted, you can see the front panel X shape is very dynamic, have to admit, most people are appearance association, the appearance is not good-looking will not continue to look inside the chassis, this front panel I give praise.
Appreciation of appearance and internal structure
The GX680H chassis is a standard middle tower with a size of 420x210x465mm, the left side plate is made of 4mm toughened glass, and the glass is fixed with no hole chute design. The overall appearance of the chassis is high, without these details.
The front fan position can support up to 360mm water cooled row or 3 14CM fans, that is to say, it can be backward compatible with 280mm, 240m, 120mm cold discharge. The size of the standard fan is 12cm, which belongs to Hangjia GX122 full moon series, and the bearing is hydraulic bearing.
At the bottom of the front panel, the X-shaped design looks like a metal texture, but the actual material is made of relatively lightweight plastic. because of this, the whole machine can be lifted with one hand, and it is very convenient to move it.
At the end of the chassis, there are seven horizontal PCIe slots standard in the tower chassis. Here comes the bright spot. The eighth and ninth PCIe slot also appears on the top of the tower chassis, but it is placed vertically. Generally, the chassis that can support the upright graphics card should be close to four or five hundred yuan at least.
It should be noted that the graphics card should not be too thick. If some 2.5-slot or 3-slot large graphics cards are installed, the left toughened glass cover may not be installed.
GX680H supports ATX, M-ATX, E-ATX and ITX motherboards. Six M-ATX copper columns are pre-installed. If you need to use a large board, you need to install the remaining copper columns yourself.
At the bottom of the chassis, the power supply air inlet is equipped with a dustproof net and a rubber foot pad to prevent resonance. In addition, you can see that the hard disk shelf has two mounting bits. If you need to install a large power supply, you can move to the position near the front of the chassis, and if you need to install a 360 cold row, you can move to a position close to the power supply.
The GX580 series made a concave on the right side of the motherboard for easy wiring, and the GX680H did not do the concave, but made two 2.5-inch hard disk positions.
Turn on the light
Many chassis like to do dead weight, although many people feel heavy is good, but in fact, I do not think it is heavy = good, the chassis is dead heavy, anti-resonance is also useless. The GX680H is very light and can be picked up easily with one hand, and it is very easy to move the chassis at ordinary times. In addition, the GX680H shape design, will not be very grandiose, the appearance is online, compared to 200 yuan price of other chassis are better-looking, light pollution is not serious, turn on and off lights are good-looking.
GX680H's internal structure is also very good, 200 yuan price of the rare vertical PCIe card slots are equipped, dustproof net, a lot of anti-vibration pad, in addition to mechanical hard disk bit a little less, other water-cooled ranking, fan position are very sufficient, generally speaking, GX680H is a very good-looking and cost-effective chassis.
Recently, the AMD TRX40 motherboard is ready to be put on the market. TRX40 is the top chipset of AMD, and most of its motherboard type is Emure ATX. It just so happens that Hangjia GX680H can support Emure ATX, not to mention the top Z390, X299, X399jue TRX40.
● Over 300,000 products
● 20 different categories
● 15 local warehosues
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
● Boleto Bancario via Ebanx (for Brazil)
● Unregistered air mail
● Registered air mail
● Priority line
● Expedited shipping
● 45 day money back guarantee
● 365 day free repair warranty
● 7 day Dead on Arrival guarantee (DOA)
2019-03-07By GB Blog Official
2017-07-18By Felicity Rosa
2019-10-23By Joe Horner
2019-01-10By GB Blog Official
2019-01-25By GB Blog Official
2019-12-10By Joe Horner