Happymodel Mobula 7 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone W / Upgrade BB2 ESC 700TVL BNF


  • FREE SHIPPING Ship between: Nov 19 - Nov 21, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer

Recommended Products for You

Customers Who Bought This Item Also Bought

Brand Name: Happymodel
Model: Mobula7
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Version: Basic Version / Standard Version ( Optional )
- The difference of them are the package charger.
Basic Version: USB Charger
Standard Version: 6 - way Charger
Weight: 25.9g (without battery)
Crazybee F3 Pro Flight Controller:
Item Name: Crazybee F3 Pro FC
MCU: STM32F303CCT6 ( 72MHZ, 256K FLASH )
Sensor: MPU - 6000 ( SPI connection )
Board size: 28.5 x 28.5MM
Power supply: 1 - 2S battery input ( DC 3.5 - 8.7V )
Built - in 5A ( each ) Blheli_S 4in1 ESC Dshot600 ready
Built - in Receiver ( Different version having diffirent receiver )
Built - in Betaflight OSD ( SPI Control )
Built - in Current meter Max 28A
Current meter scale set to 1175
Built - in 5V 1A BEC with LC filter
Built - in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
( Frsky version ) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
( Flysky version ) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
( DSM2 / DSMX version ) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
( Frsky EU - LBT version ) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
Onboard 5A 4 In 1 ESC:
Power supply: 1 - 2S LiPo / LiPo HV ( 3.5v / 8.7v )
MCU upgraded to EFM8BB21
Current: 5A continuous peak 6A ( 3 seconds )
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600
Onboard Frsky NON-EU receiver Version:
SPI BUS receiver
Frsky D8 / D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground ): 300m
Onboard Frsky EU - LBT Version
( External XM + receiver ):
Operating Voltage Range: 3.7 ~ 10V
Operating Current: 30mA @ 5V
Operating Range: Full range
With RSSI output on board: Analog 0 ~ 3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI
SE0802 16000KV Motor:
Model: SE0802
KV: 16000KV
Configu - ration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Shaft Diameter: Φ1.0
Weight: 1.8g
Support 1 - 2S Lipo
No.of Cells: 1S Lipo
40mm 3 - blade Propeller ( 4 CW + 4 CCW)
5.8G VTX AIO Camera:
5.8G 40CH 25mW VTX
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA ( type )
700TVL FOV120 Camera
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready ( Frsky EU - LBT and DSMX version not compatible )
Lipo Battery:
Capacity: 250mAh
Voltage: 3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55mm x 12mm x 7mm
Weight: 6.5g
Connector: PH2.0
Notes: Need 2pcs batteries for Series circuit
- New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO / AIR / ANGLE
- New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
- Smartaudio ready , change VTX bands, channels via OSD
DSM2 / DSMX and Frsky EU - LBT version are Serial - based receiver, so Smartaudio is not compatible.
- Adjust the settings and the PID of the flight controller via OSD
- Frsky Non - EU version support NON - EU Frsky transmitter D8 / D16 compatible
- Flysky version support both AFHDS and AFHDS - 2A protocol transmitter
- DSM2 / DSMX version support DSM2 and DSMX compatible spectrum transmitter
- Frsky EU - LBT version support Frsky EU - LBT firmware transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version
- Buzzer Ready


Dimensions and Weight

Package size: 18.50 x 12.10 x 4.60 cm / 7.28 x 4.76 x 1.81 inches
Package weight: 0.1950 kg
Product size: 9.80 x 9.80 x 3.60 cm / 3.86 x 3.86 x 1.42 inches
Product weight: 0.0258 kg

Package Contents

Package Contents: 1 x Mobula7 75mm FPV Drone, 4 x 40mm 3 - Blade Propellers ( 4 CW and 4 CCW), 4 x 3.8v 250mah 30C / 60C Lipo Battery, 1 x 1S06 6 Way Lipo / LIHV Charger, 1 x Propeller Disassemble Tool, 1 x Fixing Mount for Lipo Battery, 1 x Screwdriver

Guess you like

Customer Questions & Answers

  • All(1)
  • Product Information(1)
  • Stock Status
  • Payment
  • About Shipping
  • Others

Hi, what type of receiver is onboard?

By Maciej Nov-08/2018 09:14:21


Hello Maciej, 
It is SPI BUS receiver.


Hi, what type of receiver is onboard?

By Maciej Nov-08/2018 09:14:21


Hello Maciej, 
It is SPI BUS receiver.

1 Questions & Answers View All>

Sponsored Products Related to This Item

Customer Reviews

  • 0
  • 0
  • 0
  • 0
  • 0

Get GB Points! Be the FIRST to Write a Review!

Your Recently Viewed Items

See personalized recommendations

New customer? Start here