All
Product keywords
Please enter the email address account
Happymodel Mobula7 HD 2 - 3S 75mm Brushless Whoop Racing Drone
Share to:

Happymodel Mobula7 HD 2 - 3S 75mm Brushless Whoop Racing Drone

- Black PNP without Receiver 435607801

156.99 $177.75 Discount : 12% OFF
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Jun 13 - Jun 15, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer Repair Warranty Report item
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought

Features:
● New Crazy bee F4 PRO V2.0 AIO Flight controller 2 - 3s Lipo Compatible
● 2S for indoor Cine whoop mode
● 3S for outdoor Freestyle whoop mode
● Beta-flight support, multi-flight mode: ACRO / AIR / ANGLE
● The lightest 1102 brushless motor only 2.7g with double ball bearings
● Powerful and smoothly 
● Beta flight OSD support, easy to get RSSI, Voltage, current from your goggles ( DSMX version no RSSI output )
● Caddx turtle v2 + 1080p 60fps DVR ready
● Camera angle adjustable
● VTX power switchable 25mw - 200mw
● Smart audio ready, change VTX bands, powers, channels via OSD
● Special Breath light ready
● Real Bind and Fly version
● Compatible both for 2s - 3s Lipo / LIHV

Optional Receiver:
● Frsky Non-EU version support NON-EU Frsky transmitter D8 / D16 compatible
● Flysky version support both AFHDS and AFHDS-2A protocol transmitter
● DSM2 / DSMX version support DSM2 and DSMX compatible Spectrum transmitter
● No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..
● Full telemetry function ready ( Frsky Non-EU and Flysky version support )

Specifications:
Motor
- Mode: EX1102 KV10000
- Configuration: 9N 12P
- Stator Diameter: 11mm
- Stator Length: 2mm
- Shaft Diameter: 1mm
- Motor Dimension ( Dia. x Len ): 13.5mm x 16mm
- No.of Cells( Lipo ): 1S - 3S

Flight controller
- ( Frsky version ) CRAZYBEE F4FR PRO V2.0 Firmware target: CrazybeeF4FR
- ( Flysky version ) CRAZYBEE F4FS PRO V2.0 Firmware target: CrazybeeF4FS
- ( DSM2 / DSMX version ) CRAZYBEE F4DX PRO V2.0 Firmware target: CrazybeeF4DX
- ( No RX version ) CRAZYBEE F4 PRO V2.0 Firmware target: CrazybeeF4DX
- MCU:STM32F411CEU6 ( 100MHZ, 512K FLASH )
- Sensor: MPU-6000 ( SPI connection )
- Board size: 28.5 x 28.5MM
- Power supply: 1 - 3S battery input ( DC 3.5 - 13V )
- Built-in 5A ( each ) Blheli_S 4in1 ESC Dshot600 ready
- Frsky version Built-in SPI Frsky receiver with telemetry ( D8 / D16 switchable )
- Flysky version Built-in SPI Flysky receiver with telemetry ( AFHDS / AFHDS2A switchable )
- DSM2 / X Version built-in Serial-based DSM2 / DSMX compatible satellite receiver
- No RX version need to add external Receiver
- Built-in Beta flight OSD ( SPI Control )
- Built-in Current meter Max 28A
- Current meter scale set to 1175
- Built-in 5V 1A Buck / Boost with LC filter
- Built-in voltage detection

Onboard 4in1 ESC
- MCU upgraded to EFM8BB21
- Power supply: 1-3S LiPo / LiPo HV ( 3.5v / 13v )
- Current: 5A continuous peak 6A ( 5 seconds )
- Support BLHeliSuite programmable
- Factory firmware: S_H_50_REV16_7.Hex
- Default protocol: DSHOT600

Frsky NON-EU receiver Version
- SPI BUS receiver
- Frsky D8 / D16 switchable
- Compatible Non-EU transmitter both D8 and D16 mode
- Channels: 8ch or 16ch
- Failsafe support
- No ground interference ( Transmitter and receiver 1 m from the ground ): 300m 

Flysky receiver Version  
- SPI BUS receiver
- Protocol: AFHDS and AFHDS-2A Switchable
- Channels: 8ch ( AFHDS ) or 14ch ( AFHDS-2A )
- No ground interference ( Transmitter and receiver 1 m from the ground ): 300m
- Failsafe support

DSM2 / DSMX receiver version  
- Serial bus receiver
- Protocol: DSM2 / DSMX compatible
- Channels: 6 - 9 ( Depend on your radio )
- No ground interference ( Transmitter and receiver 1 m from the ground ): 300m

PNP No RX version   
- No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc.   

VTX   
- Output power: 25 - 200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA ( type )
- Antenna: RG178 antenna
- Frequency: 5.8GHz 5bands 40 channels
- With Race land
- Smart audio ready
- Weight: 3g   

CADDX Turtle V2    
- Image sensor: 1 / 2.7 inch CMOS sensor
- Horizontal: 800TVL
- TV system: NTSC / PAL changeable
- Video Resolution: 1080P 60fps / 1080P 30fps / 720 60fps
- Power Input: DC 4.5 - 20V
- FPV FOV: 155 degrees
- Recording FOV: 170 degrees
- Mini Illumination: 0.01lux
- Image Resolution: 2 Megapixels
- Lens: 1.8mm Turbo Eye Lens
- Working Current: 380mA 5V / 160mA 12V ( low consumption )
- OSD Menu: Yes ( Support Voltage Display )
- Video Files: MP4
- Audio: Support
- Electronic Shutter: PAL : 1 / 50 - 100,000; NTSC : 1 / 60 - 100,100
- S / N Ratio: more than 60dB ( AGC OFF )
- Video Output: CVBS
- Max Micro SD Card Supported: 8 - 64GB ( need Class 10 or above, recommend Class 10 / UHS-I / UHS-II )
- Color: Red  

Lipo Battery   
- Capacity: 300mAh
- Voltage: 11.4v
- Continuous Discharge Rate: 30C
- Instantaneous discharge rate: 60C
- Size: 65mm x 18mm x 11mm
- Weight: 23g
- Connector: XT30
- Charging time: 35 - 50min
- Using time: 10min

Specification

General

Brand: Happymodel
Type: 4-blade Propeller,Brushless

Dimension and Weight

Product weight: 0.0662 kg
Package weight: 0.5000 kg
Product size (L x W x H): 9.80 x 9.80 x 4.50 cm / 3.86 x 3.86 x 1.77 inches
Package size (L x W x H): 25.00 x 25.00 x 20.00 cm / 9.84 x 9.84 x 7.87 inches

Package Contents

Package Contents: 1 x Mobula7 Frame, 1 x DSM2 / DSMX RX Receiver, 4 x EX1102 KV10000 Motor, 1 x 40mm Propeller ( 4cw + 4ccw ), 1 x Caddx Turtle V2 + 1080p 60fps DVR, 1 x 5.8G 40ch 25mw - 200mw VTX, 1 x Battery, 1 x Propeller Disassemble Tool , 1 x Screwdriver
Happymodel Mobula7 HD 2 - 3S 75mm Brushless Whoop Racing Drone- Black PNP without Receiver
Happymodel Mobula7 HD 2 - 3S 75mm Brushless Whoop Racing Drone- Black PNP without Receiver
Happymodel Mobula7 HD 2 - 3S 75mm Brushless Whoop Racing Drone- Black PNP without Receiver
Happymodel Mobula7 HD 2 - 3S 75mm Brushless Whoop Racing Drone- Black PNP without Receiver
Happymodel Mobula7 HD 2 - 3S 75mm Brushless Whoop Racing Drone- Black PNP without Receiver


Guess you like

Customer Reviews

0
  • 0
  • 0
  • 0
  • 0
  • 0
See all 0 reviews Write a Review

Get GB Points! Be the FIRST to Write a Review!

Customer Questions & Answers

  • All(1)
  • Product Information(1)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

works with walkera devo7 sbus receiver?

By Mauricio May-09/2019 21:41:13

A

Hello Mauricio, 
It works with DSM2 / DSMX RX Receiver.

Let me know if you need any help.



Q

works with walkera devo7 sbus receiver?

By Mauricio May-09/2019 21:41:13

A

Hello Mauricio, 
It works with DSM2 / DSMX RX Receiver.

Let me know if you need any help.



Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

1 Questions & Answers View all>

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service