STX225 DIY Version FPV Racing RC Drone Kit
Share to:

STX225 DIY Version FPV Racing RC Drone Kit

- BATTLESHIP GRAY 281528801

F4 OSD 35A RGB LED BLHeli - 32 1200TVL Camera 5.8G 40CH 600mW VTX
99.99 $133.17 Discount : 25% OFF
  • FREE SHIPPING Ship between: Dec 17 - Dec 19, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer Repair Warranty Report item
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought

Frame Kit Specifications:
● Wheel base: 225mm
● Frame arm thickness: 4mm
● Bottom plate thickness: 2mm
● Side plate thickness: 2mm
Motor Specifications:
● Motor KV: 2300
● Idle current: 1.26A
● Lipo cell: 3 - 5S
● Max continuous current: 25A
● Max continuous power: 240W
● Configuration: 12N/14P
● Motor resistance ( RM ): 0.0572 ohm
● Stator diameter: 22mm
● Stator thickness: 4mm
● Motor diameter: 27.88mm
● Motor body length: 20mm
● Overall shaft length: 34.2mm
ESC Specifications:
● Continuous current: 35A
● Peak current: 40A ( 10S )
● Input voltage: 2 - 5S
● BEC: no
● Main control chip: STM32F051
● Firmware: BLHeli - 32 supports 500HZ PWM, Oneshot125, Oneshot42, Multishot, Dshot150 / 300 / 600 / 1200
Flight Controller Specifications:
● Sensor: MPU6000
● Power supply: 5V
● Integrated OSD
Camera Specifications:
● Total pixels: PAL: 1020H × 596V ( 0.61MP ); NTSC: 1020H × 508V ( 0.52MP )
● Effective pixels: PAL: 976H × 582V ( 0.57MP ); NTSC: 976H × 494V ( 0.48MP )
● Signal system: PAL / NTSC switchable
● Resolution ratio: 1200TVL
● Automatic gain control: yes
● White balance: on / off optional
● Exposure mode: electron exposure
● Electronic shutter: 1/50 ( 1/60 ) - 1/100000S
● Camera lens: standard 2.3mm
● Lens operating voltage: DC 12V
● Working current: 70mA ( low power consumption )
● Working temperature: - 20 Deg.C - -60 Deg.C
● Humidity: 0 percent - 98 percent
Transmitter Specifications:
● Frequency band: A - E ( 8 channels in each band )
● Transmitting power: 600mW
● Full video format: NTSC / PAL
● Input voltage: 7V - 24V
● Transmission distance: more than 0.5km ( 25mW ), more than 1km ( 200mW ), more than 2km ( 600mW )
● With output power self-check function
● Antenna connector: MMCX
Propeller Specifications:
● Quantity: 2 pairs
Battery:
● 3 - 4S 1300 - 1500mAh LiPo ( not included )

Specification

General

Type: Frame Kit

Dimension and Weight

Product weight: 0.2660 kg
Package weight: 0.3600 kg
Product size (L x W x H): 19.00 x 19.50 x 4.50 cm / 7.48 x 7.68 x 1.77 inches
Package size (L x W x H): 20.00 x 20.00 x 5.00 cm / 7.87 x 7.87 x 1.97 inches

Package Contents

Package Contents: 4 x Arm, 1 x Bottom Plate, 1 x Top Plate, 1 x Camera Mounting Plate, 4 x Motor, 1 x Video Transmitter, 1 x Video Transmitter Mounting Plate, 1 x Antenna, 1 x Flight Controller, 1 x Camera, 4 x ESC, 4 x Aluminum Column, 3 x Connecting Cable, 4 x Propeller, 1 x Set of Screws, 1 x Battery Cable Tie, 1 x Adhesive
STX225 DIY FPV Racing RC Drone Kit- Battleship Gray
STX225 DIY FPV Racing RC Drone Kit- Battleship Gray
STX225 DIY FPV Racing RC Drone Kit- Battleship Gray
STX225 DIY FPV Racing RC Drone Kit- Battleship Gray
STX225 DIY FPV Racing RC Drone Kit- Battleship Gray
STX225 DIY FPV Racing RC Drone Kit- Battleship Gray
STX225 DIY FPV Racing RC Drone Kit- Battleship Gray
STX225 DIY FPV Racing RC Drone Kit- Battleship Gray

Guess you like

Customer Reviews

5 out of 5
  • 10
  • 0
  • 0
  • 0
  • 0
See all 10 reviews Write a Review
  • carmanuelz
    Yes (0) Color: Battleship Gray
    El mejor dron para principiantes de este BlackFriday 2018, Tyro99 Killer
    Este drone es el mejor de carreras que puedes adquirir este 2018, aplique para la oferta de black friday, los componentes son buenas piezas bien pensadas para este modelo, un stack basico para empezar ya que es facil de montar, des pues de pocas soldaduras ya esta listo para volar, el FC es una copia del F4-AIO de de Matek y cuenta con el ultimo betaflight. Las palas son muy suaves son una 5042 tripala, nos brinda excelente control y maniobrabilidad, tiene variadores bheli-32 de 35A y viene con una antena pagoda RHCP. Tiene fibra de carbono de 4 mm en los brazos desmontables.

    Nov 24,2018

  • First Quad
    Yes (0) Color: Battleship Gray
    My first Quad
    Just flew t for the first time today, very good value, PCB silkscreen was difficult to read through. If you look on rcgroups you will find a PDF of the pinouts that makes it so much easier.

    The build went together smoothly and everything worked first time, I am very happy.

    Dec 07,2018

  • kingsman
    Yes (0) Color: Battleship Gray
    Thanks gearbest
    received within only 7 days very fast shipping.
    All works complete, just only in one esc Green lights not working, but happy with product.
    thanks gearbest and support tgis seller.

    Nov 23,2018

  • pat desal
    Yes (0) Color: Battleship Gray
    Parfait pour débuter un montage
    Le drone est assez simple à monter grâce à un tutoriel sur YouTube. Il s'agit de mon deuxième car à ce prix ,impossible de trouver toutes les pièces au détail si peu cher.Bravo à skystars et à gearbest. Je le recommande pour tous les débutants en montage et en pilotage.

    Dec 11,2018

  • SUNGJONG
    Yes (1) Color: Battleship Gray
    I think starter is a good product to start.
    The first consideration was tyro99 and tero q215,
    I chose to watch the YouTube review of stx225.
    I do not know about the new La Quad Copter yet, but I think it has good performance and price to practice.

    Oct 31,2018

  • William Mitchell
    Yes (0) Color: Battleship Gray
    STX 225
    Unbelievable FAST delivery, received in 6 days! Nicely presented and packed. A must for those getting into 5" quads. Fast, stable and manouverable. A great, budget, everday quad. Thank you GEARBEST

    Nov 21,2018

  • Ardouin
    Yes (0) Color: Battleship Gray
    nickel
    produit livré en 10jours.Pas de notice de montage mais facile à monter grâce aux tutos sur YouTube. Vole très bien, rapide,maniable,très silencieux et 10 minutes de vol possible avec une lipo 4s 1300mah.Reste à installer un rx et un buzzer non fournis.

    Oct 22,2018

  • good
    Yes (0) Color: Battleship Gray
    fpv problem
    shipping is good fly great but fpv video feed won't come through the FC both cam and vtx are working idont know whats the problem here

    Dec 09,2018

  • Jelesijevic
    Yes (0) Color: Battleship Gray
    STX225
    5 stars for drone but 0.5 star for shipping...Strong frame and descent motors

    Nov 17,2018

  • Stx225
    Yes (0) Color: Battleship Gray
    can’t complain for the dollar
    Good beginners kit really basic soldering skills required,

    Nov 06,2018

Customer Questions & Answers

  • All(3)
  • Product Information(3)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

Hi does it come with a controller?

By Razza Nov-25/2018 04:26:55

A

Hello Razza, 

Thank you for your inquiry.

Package Contents: 4 x Arm, 1 x Bottom Plate, 1 x Top Plate, 1 x Camera Mounting Plate, 4 x Motor, 1 x Video Transmitter, 1 x Video Transmitter Mounting Plate, 1 x Antenna, 1 x Flight Controller, 1 x Camera, 4 x ESC, 4 x Aluminum Column, 3 x Connecting Cable, 4 x Propeller, 1 x Set of Screws, 1 x Battery Cable Tie, 1 x Adhesive

Q

Does this product support Futaba PWM transmitter ,if not what do I need to buy to make it work with my 10 cg Futaba transmitter

By Neil Nov-22/2018 15:07:04

A

Hello Neil,


We are sorry that this is not possible, you need to buy a futaba sbus receiver.

Let me know if you need any further assistance. 


Q

hi. this diy kit still available ?

By Hafizuddin Nov-03/2018 12:20:22

A

Hello Hafizuddin,


This is a popular product, but we are happy to inform you that it is in stock and available to purchase today. 

Please feel free to order it.


Q

Hi does it come with a controller?

By Razza Nov-25/2018 04:26:55

A

Hello Razza, 

Thank you for your inquiry.

Package Contents: 4 x Arm, 1 x Bottom Plate, 1 x Top Plate, 1 x Camera Mounting Plate, 4 x Motor, 1 x Video Transmitter, 1 x Video Transmitter Mounting Plate, 1 x Antenna, 1 x Flight Controller, 1 x Camera, 4 x ESC, 4 x Aluminum Column, 3 x Connecting Cable, 4 x Propeller, 1 x Set of Screws, 1 x Battery Cable Tie, 1 x Adhesive

Q

Does this product support Futaba PWM transmitter ,if not what do I need to buy to make it work with my 10 cg Futaba transmitter

By Neil Nov-22/2018 15:07:04

A

Hello Neil,


We are sorry that this is not possible, you need to buy a futaba sbus receiver.

Let me know if you need any further assistance. 


Q

hi. this diy kit still available ?

By Hafizuddin Nov-03/2018 12:20:22

A

Hello Hafizuddin,


This is a popular product, but we are happy to inform you that it is in stock and available to purchase today. 

Please feel free to order it.


Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

3 Questions & Answers View All>

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here