BISON 150mm Micro FPV Racing Drone


600TVL 2.1mm CCD Camera / dys SE1806 2300KV Motor / ARF4 - 3AOM F4 Flight Controller
Tax Info Price Protection Price Disclaimer

Recommended Products for You

Customers Who Bought This Item Also Bought

BISON 150mm micro FPV racing drone features the robust build and strong force. Compared with other high-quality racing frames, its chassis is 25 percent thicker, i.e. more durable under huge impact.
It can fly insanely at a super high speed with the SE1806 2300KV brushless motors, thrilling you all the time after it takes off. However, the extraordinary racer is always in your control and it can respond to your commands immediately with the high-performance F4 flight controller and the 4-in-1 DShot ESC.
BISON FPV racing drone has no rivals! Rush to get your victory!

Main Features:
Strong carbon fiber frame, with crashproof 4mm bottom board, 2mm side board
Exceptional power system - dys SE1806 2300KV motors and 4-in-1 28A DShot ESC
F4 flight controller with OSD and the latest OMNIBUS F4 BetaFlight firmware
Optimum real-time FPV with 600TVL CCD camera, 2.1mm lens, 160-degree FOV
1km long image transmission range, 0 / 25 / 100 / 200mW adjustable via OSD menu

Flight controller: ARF4 - 3AOM F4
Motor: dys SE1806 2300KV
ESC: BLHeli - S 28A 4-in-1
Propeller: 3052 three-blade
FPV camera: 600TVL CCD 2.1mm 160-degree FOV
Video transmitter: FB200T 5.8G 48CH 0 / 25 / 100 / 200mW
Image transmission distance: 0.5km or more ( 25mW ); 0.8km or more ( 100mW ); 1km or more ( 200mW )
Supported receiver: DSM2 / DSMX / PPM / SBUS / IBUS
Antenna: pagoda, with SMA male connector
Battery connector: XT30

Carbon Fiber Frame
Wheelbase: 150mm
Chassis thickness: 4mm
Side board thickness: 2mm

dys SE1806 Brushless Motor
KV rating: 2300KV
Bearing: the latest imported NMB bearings
Shaft material: high-strength titanium alloy
Max. thrust: 600g / piece

ARF4 - 3AOM Flight Controller
IMU: MPU6000 ( SPI )
OSD: BetaFlight OSD
Micro black box: built-in
Firmware version: OMNIBUS F4 BetaFlight 3.2.0
BEC output: 5V 3A ( max. )

AR BLHeli - S 28A 4-in-1 ESC
Firmware: BLHeli - S 16.6
Processor: EFM8BB21F16G
Driver: new-generation 3-in-1 MOSFET
Input power: 2 - 4S LiPo / HV LiPo
Brake function: on ( default )

FPV Camera
Image sensor: 1/3 inch Super HAD II CCD
Horizontal resolution: 600TVL
Lens: 2.1mm ( M8 ) 160-degree FOV
Signal system: NTSC
One touch scene setting: Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight
S/N ratio: more than 60dB ( AGC off )
Electronic shutter speed: 1/60 to 100,000 second
Auto gain control ( AGC ): yes
Min. illumination: 0.01 lux at 1.2F
Input voltage: 5 - 36V DC
Current: 60mA at 12V / 130mA at 5V
Net weight: 5.6g
Dimension: 19 x 19 x 19mm

The colors ( transparent, black, blue, red and yellow ) of the propellers will be sent randomly.



Type: Frame Kit
Version: BNF


Model: SE1806
Motor Type: Brushless Motor
KV: 2300
Maximum Thrust: 600g / piece ( tested with 4S LiPo )

Flight Controller

Flight Controller Type: F4


Video Resolution: 600TVL ( horizontal )
Video Standards: NTSC
Sensor: CCD

Electronic Speed Controller

Firmware: BLHeli-S
Functions: DShot150,DShot300,DShot600,Multishot,Oneshot125,Oneshot42
Continuous Current: 4 x 28A
Burst Current: 4 x 35A
Input Voltage: 2 - 4S

Dimension and Weight

Product weight: 0.1850 kg
Package weight: 0.2100 kg
Product size (L x W x H): 14.50 x 12.50 x 4.00 cm / 5.71 x 4.92 x 1.57 inches
Package size (L x W x H): 20.00 x 15.00 x 6.00 cm / 7.87 x 5.91 x 2.36 inches

Package Contents

Package Contents: 1 x FPV Racing Drone

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Color and Style Disclaimer:
The item color and style(or pattern) is subject to stock availability, we reserve the right to substitute for another color/pattern.

Guess you like

Customer Questions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

0 Questions & Answers View All>

Sponsored Products Related to This Item

Customer Reviews

4 out of 5
  • 0
  • 1
  • 0
  • 0
  • 0
  • Feiticeir0
    It could have been excelent
    Color:Colormix Size:BNF with FrSky D8 Mode Receiver
    Overall, I'm very happy with it.
    The components are almost well chosen (more of this latter). The camera, the VTx, the FC, the frame and the ESCs are all excellent.

    The quality of the camera is good and transitions from dark to light (and vice-versa) are fast and do not interfere with the flight.
    The VTX has support for Betaflight OSD, but the RX PAD of the VTx is not connected to the FC. You can solder it yourself if you want.

    The frame is strong and it can withstand some hard crashes - one of those busted a motor, had to buy a new one.

    Overall, it's great.
    Now, the not so good options.
    The motors are under kv's.. For this drone, the motors should at least be 3000kv . They are 2300kv and you start to see the lack of kvs from the beginning - the drone is slow...
    If you try a punch out, it's slow to respond . After a maneuver, when you're trying to recover, you don't have time because it hasn't enough power recover - unless you're high enough to be able to up the throttle stick and wait for it to recover

    I've tested this with 4S 550mah batteries. Those are the ones I have - waiting for a couple of 4S 850mah to arrive - but I think it will be the same.

    Overall, the drone is good, strong and good looking. The components are well chosen and work well together.
    I'm going to change the motors for some 3000kvs or 3700kvs. After that, I believe the drone will behave much better and it will what it should have been from the beginning.
    Change the motors for others with higher kvs and it will really be a BISON. Now, it's a slow BISON..

    Sep 18,2018

    Was this review helpful?

Your Recently Viewed Items

See personalized recommendations

New customer? Start here