SPC MAKER SPC 80A 80mm Micro Brushless FPV Racing Drone - BNF

- COLORMIX WITH FRSKY RECEIVER 226148202

5.8G 600TVL / 1104 7500KV Motor / F3 6DOF FC with OSD
1 Notice Submitted
;   
Tax Info Price Protection Price Disclaimer
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought

Description:
SPC MAKER SPC 80A is an exceptional brushless indoor FPV racing drone with a carbon fiber frame which features the integrated propeller protector and impact resistance. The OMNIBUS F3 flight controller can keep the drone well-balanced, and micro brushless motors can be controlled accurately by the 4-in-1 BLHeli - S 10A ESC via the latest digital signals. Just strap the battery, bind with your transmitter, and you will be impressed by the flight performance of the little quadcopter.

Main Features:
● Integrated carbon fiber propeller protector increases the impact resistance and durability of the UAV
● High-performance OMNIBUS F3 flight controller with OSD + 4-in-1 BLHeli - S 10A DShot ESC
● Stable high-speed flying with the 1104 7500KV micro brushless motor and 50mm five-blade propeller
● 600TVL camera, 5.8G real-time FPV, 48-channel coverage, including RaceBand
● Two 7.4V 500mAh 30C LiPo batteries. Each provides about 4 - 5 minutes' flight time

Specifications:
Wheelbase: 80mm
Size: 116.5 x 116.5 x 55mm
Weight: 75g ( without battery ); 102g( with battery )
Brushless motor: SPC MAKER 1104 7500KV
Brushless ESC: 4-in-1 BLHeli - S 10A DShot
Propeller: 50mm five-blade
Battery: 7.4V 500mAh 30C LiPo
Camera: 600TVL, 1/4 inch CMOS
Video transmitter: 5.8G 48CH 25mW / 100mW NTSC / PAL
Whip antenna gain: 3dBi
Flight controller: OMNIBUS F3 6DOF with OSD

Flight Controller
CPU: STM32F3CCT6, 256K flash
IMU: MPU6000 ( SPI )
Version: 6DOF ( no barometer nor compass )
OSD: BetaFlight OSD
Firmware: BetaFlight 3.1.0 OMNIBUS
LC filter: yes
BEC output: 5V 1A BEC
Mounting hole: 2.5mm diameter, 20mm spacing
LED strip: support
Buzzer: support

4-in-1 BLHeli - S ESC
Processor: EFM8BB21F16G
MOSFET: TPN2R703NL
Driver: new-generation 3-in-1 MOSFET
BEC output: no
Continuous current: 4 x 10A
Burst current: 4 x 15A ( up to 5 seconds )
Supported control signals: DShot, Oneshot
Input voltage: 2 - 4S LiPo / HV LiPo

FPV Camera
Image sensor: 1/4 inch CMOS
Horizontal resolution: 600TVL ( PAL: 720 x 540 / NTSC: 640 x 480 )
Input format: NTSC / PAL switchable
Lens angle: H: 120 degree; V: 100 degree
Frequency range: 5362 - 5945MHz
Number of channels 48
Output power: 25mW / 100mW
Channel selection: switch
Channel display: 8 LEDs for channels, 6 LEDs for bands
Image transmission range: about 100 - 200m
Operating temperature: -10 to 60 Deg.C
Power consumption: 200 - 215mA at 5V DC IN
Power supply: 2.9 - 5.5V

Compatibility of Different Versions:
BNF with DSM2 receiver: supports Spectrum, JR, Walkera Devo 10 / Devo 7E ( with deviation firmware ) transmitters
BNF with FrSky receiver: supports FrSky X9D / X9D PLUS / XJT ( D8 Mode ), DJT / DFT / DHT transmitters
BNF with FLYSKY receiver: supports FS - i6 / FS - i6X / FS - i6S / FS - TM8 / FS - TM10 / FS - i10 and other AFHDS 2A transmitters
BNF with Futaba receiver: supports Futaba TM - 7 / TM - 8 / TM - 10 / TM - 14 transmitter modules, T6EX / 7C / T8FG / T10CG / T12FG / T14SG transmitters

Note:
The hollow styles of the camera protection boards will be sent randomly.

Specification

General

Type: Frame Kit
Version: BNF

Motor

Model: 1104
Motor Type: Brushless Motor
KV: 7500

Flight Controller

Flight Controller Type: F3

Camera

Video Resolution: 600TVL ( horizontal )
Video Standards: NTSC,PAL
Sensor: CMOS

Electronic Speed Controller

Firmware: BLHeli-S
Functions: DShot150,DShot300,DShot600,Oneshot125,Oneshot42
Input Voltage: 2 - 4S

Battery

Battery (mAh): 500mAh
Battery Coulomb: 30C
Flying Time: 4~5mins
Charging Time.: 50~60mins

Dimension and Weight

Product weight: 0.0750 kg
Package weight: 0.4260 kg
Product size (L x W x H): 11.65 x 11.65 x 5.50 cm / 4.59 x 4.59 x 2.17 inches
Package size (L x W x H): 22.00 x 17.00 x 7.00 cm / 8.66 x 6.69 x 2.76 inches

Package Contents

Package Contents: 1 x SPC 80A Racing Drone, 2 x 7.4V 500mAh 30C LiPo Battery

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

Guess you like

Customer Questions & Answers

  • All(1)
  • Product Information(1)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

Can I use iRangeX iRX6 Multiprotocol TX Module for Flysky FS-i6 i6x Transmitter on this DSM2 receiver unit?

By William Ho Jun-12/2018 07:16:50

A

is allowed

Q

Can I use iRangeX iRX6 Multiprotocol TX Module for Flysky FS-i6 i6x Transmitter on this DSM2 receiver unit?

By William Ho Jun-12/2018 07:16:50

A

is allowed

1 Questions & Answers View All>

Sponsored Products Related to This Item

Customer Reviews

5 out of 5
  • 1
  • 0
  • 0
  • 0
  • 0
  • daive
    ちょっと、大きめが欲しかった。
    Color:Colormix Size:with Futaba Receiver
    ちょっと、大きめだが、大きすぎないサイズの機体が欲しかったので
    注文してみました。
    FUTABA用のレシーバー付きです。
    機体は、付属のケースにシッカリ固定されて入っています。
    飛ばすための付属品は、このケースに網羅されています。
    見た感じの、作りは丁寧です。
    バッテリーの充電、飛行前点検を行えば、
    直ぐに飛ばせそうな状態で、到着しました。
    機体のチェック、設定をして、飛ばしてみたいと思います。
    Suggestion
    特になし。

    Jan 13,2018

    Was this review helpful?

Your Recently Viewed Items

See personalized recommendations

New customer? Start here