Please enter the email address account
For the price, I would super recommend this product.

Pros:
Good price (11300 p.)
1. Well-designed design.
2. A project with open documentation.
3. Good packaging.

Minuses:
1. Missing screws of the original assembly.
2. We need a gasket for the Z-axis engine (otherwise the helical axis will be skewed).
3. The plastic in the kit is not enough and a third of the test dog’s figure is a recorded me
For the price, I would super recommend this product.

Pros:
Good price (11300 p.)
1. Well-designed design.
2. A project with open documentation.
3. Good packaging.

Minuses:
1. Missing screws of the original assembly.
2. We need a gasket for the Z-axis engine (otherwise the helical axis will be skewed).
3. The plastic in the kit is not enough and a third of the test dog’s figure is a recorded me
For the price, I would super recommend this product.

Pros:
Good price (11300 p.)
1. Well-designed design.
2. A project with open documentation.
3. Good packaging.

Minuses:
1. Missing screws of the original assembly.
2. We need a gasket for the Z-axis engine (otherwise the helical axis will be skewed).
3. The plastic in the kit is not enough and a third of the test dog’s figure is a recorded me
For the price, I would super recommend this product.

Pros:
Good price (11300 p.)
1. Well-designed design.
2. A project with open documentation.
3. Good packaging.

Minuses:
1. Missing screws of the original assembly.
2. We need a gasket for the Z-axis engine (otherwise the helical axis will be skewed).
3. The plastic in the kit is not enough and a third of the test dog’s figure is a recorded me
For the price, I would super recommend this product.

Pros:
Good price (11300 p.)
1. Well-designed design.
2. A project with open documentation.
3. Good packaging.

Minuses:
1. Missing screws of the original assembly.
2. We need a gasket for the Z-axis engine (otherwise the helical axis will be skewed).
3. The plastic in the kit is not enough and a third of the test dog’s figure is a recorded me
For the price, I would super recommend this product.

Pros:
Good price (11300 p.)
1. Well-designed design.
2. A project with open documentation.
3. Good packaging.

Minuses:
1. Missing screws of the original assembly.
2. We need a gasket for the Z-axis engine (otherwise the helical axis will be skewed).
3. The plastic in the kit is not enough and a third of the test dog’s figure is a recorded me
1/6
For the price, I would super recommend this product.

Pros:
Good price (11300 p.)
1. Well-designed design.
2. A project with open documentation.
3. Good packaging.

Minuses:
1. Missing screws of the original assembly.
2. We need a gasket for the Z-axis engine (otherwise the helical axis will be skewed).
3. The plastic in the kit is not enough and a third of the test dog’s figure is a recorded me
Al

For the price, I would super recommend this product.

Pros:
Good price (11300 p.)
1. Well-designed design.
2. A project with open documentation.
3. Good packaging.

Minuses:
1. Missing screws of the original assembly.
2. We need a gasket for the Z-axis engine (otherwise the helical axis will be skewed).
3. The plastic in the kit is not enough and a third of the test dog’s figure is a recorded memory card.

Advice:
1. Tighten the screws of the originally assembled structure (frame, table mount).
2. Place two toothpicks between the Z-axis motor and the frame post. (see photo)
3. Initially, do not tighten, but only make two screws securing the roller plate to the X-axis profile. Then install and drive down and up along the X-axis, and only then tighten these two screws making sure that the X-axis is in a strictly horizontal position.
4. Update the printer firmware via the IPS interface (you can use Arduino). View More View Less

Share this with

You've reached to the end