1A TP4056 Lithium Battery Charging Module DIY Accessories
Share to:

1A TP4056 Lithium Battery Charging Module DIY Accessories

- BLUE 122068401

13.86
  • FREE SHIPPING Ship between: Dec 17 - Dec 19, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer Repair Warranty Report item
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought

Features:
- Chipset: TP4056
- Input voltage: 4.5V-5.5V
- Fully charged voltage: 4.2V
- Charging current: 1A adjustable
- Working temperature: -10 - 85degrees
- Charging method: Linear charging 1 percent
- Charging precision: 1.5 percent
- Charging indicator: Red light charging, green light fully charged
- Interface: Mini USB
- Great for DIY project

Specification

General

Material: PCB + Iron

Weight and Size

Product weight: 0.003 kg
Package weight: 0.015 kg
Product Size(L x W x H): 2.8 x 1.9 x 0.5 cm / 1.10 x 0.75 x 0.20 inches
Package Size(L x W x H): 7.0 x 5.0 x 1.5 cm / 2.75 x 1.97 x 0.59 inches

Package Contents

Package Contents: 1 x DIY 1A Lithium Battery Charging Module
Adjustable 1A TP4056 Lithium Battery Charging Module for DIY Projects- BlueAdjustable 1A TP4056 Lithium Battery Charging Module for DIY Projects- BlueAdjustable 1A TP4056 Lithium Battery Charging Module for DIY Projects- BlueAdjustable 1A TP4056 Lithium Battery Charging Module for DIY Projects- Blue

Guess you like

Customer Reviews

4.92 out of 5
  • 180
  • 16
  • 0
  • 0
  • 0
See all 196 reviews Write a Review
  • Mike
    Yes (0) Color: Blue
    s
    This PCB is built around a NanJing Top Power ASIC corp. TP4056 charging chip. Search for the datasheet of this part for full details. Everything works as described in the datasheet. The Rprog resistor is 1.2kohm which sets the maximum charging current to 1amp. Beware of over-heating and burning-out the chip at this current! Rprog (the resistor in the centre of the bottom edge of the PCB marked "122") can be changed to a higher value to reduce the charging current and so reduce the power dissipation. e.g., Rprog=4.7Kohm will set the charging current to 250mA. High power dissipation can occur when charging a cell which is discharged. When the cell voltage is <2.9v the charge circuit is in trickle charge mode (130mA). As soon as the cell voltage reaches 2.9v, the charge circuit will switch into constant current charge mode. At 5v input and 1amp charging current, the asic and 0.4ohm series resistor will now dissipate 2 watts between them. This will burn-out the asic very quickly. Provided the circuit is used within its power dissipation limits, it does everything you would expect of a LiIon cell charger.
    Suggestion
    Can overheat if used to charge over-discharged cells at the maximum charge current.

    Aug 16,2015

  • Leonid
    Yes (0) Color: Blue
    Плата зарядки лития
    Занимает мало места можно уместить куда угодо в любой корпус .низкая цена .можно сделать очень дешовый зарядник и не переплазивать за зоводские избелия .там есть smd резистор заменя который можно изменить ток зарядки max 1a .как это сделать можно тайти в интернете инструкцыя очень распространена .я обычно ипользую когда меревожу старые устройсва в которых стояли никель кадбий акб на литий .просто ставим эту платку и всё работает
    Suggestion
    Греется на токе 1а весьма нормально но не до ожога .для этой микросхемы это норма .немного завышена цена .

    Mar 21,2018

  • poohnopster
    Yes (0) Color: Blue
    Charger module for 18650 lithium battery
    I have several 18650 cells salvaged from old laptop batteries. This module, for under a dollar US, is perfect to charge them. It's powered by any micro USB charger that most people already have. I fastened it to a piece of scrap wood with 2 plastic push pins and soldered wires to a a couple pieces of brass from an old electrical plug (from broken christmas lights). The led is red when charging and green when the battery is charged. It doesn't get much simpler that this.

    Oct 08,2018

  • jke
    Yes (0) Color: Blue
    fixes Baofeng 888S charger
    Bought this cheap board to fix the charger on the Baofeng 888S. Swapped this in and the original pcb out. Works very fine. Picked up the signal from the LEDs on the board and routed them to external ones.

    For this ultra low price, you should really get more than one. High quality!

    The USB socket is "USB mini" (~ recycled from old external usb enclosures).

    I would buy this product again any time.
    Suggestion
    none

    May 11,2016

  • Julio Cesar
    Yes (0) Color: Blue
    Bargain
    - Well i really needed a charging module for a couple of batteries i had stored and i couldn't use them because i didn't have a way to charge them,
    - With this module now i can charge them and it also notifies me when they are fully charged, so with this module you don't have to worry anymore for overcharging a battery.
    Suggestion
    The size maybe?, it's so small for me hehe

    Jan 19,2016

  • Ivan
    Yes (0) Color: Blue
    Universal charger for batteries
    Universal charging the battery. Charging - super. charges from 0.8A gradually falling at the end of charge up to 0.1A. charges the full battery capacity. very good instrument in building portable amplifier circuits. recommend.
    Suggestion
    I did not notice any problems

    Dec 02,2015

  • Paulo
    Yes (0) Color: Blue
    TP4056 Lithium Battery Charging
    Good for projects with arduino and esp8266, tested and works at 100% without any problem.
    Fast shipping and arrived on time.
    Good prices
    I recommend
    Suggestion
    Anything

    Apr 28,2017

  • Alexandr
    Yes (0) Color: Blue
    Отлично заряжает
    Дешево и сердито заряжает литий. Правда придется доработать как минимум припаяв два провода. Некоторые советует припаять на концы проводков магниты, но у меня к некоторым аккумуляторам они плохо прилипали. Приспособил под аккумуляторы коробку из под таблеток АЦЦ, пружинку взял от сломанной детской игрушки, а сама плата отлично вошла в коробку от SD карты.
    Suggestion
    Мой экземпляр в процессе зарядки горит красным, а по окончании синим. Ввиду этого целесообразно дополнить описание, так в соответствии с ним ожидал зеленый свет.

    Nov 29,2015

  • Андрей
    Yes (0) Color: Blue
    Зарядный модуль для литиевых аккумуляторов
    Отличное качество изготовления печатной платы. Хорошая пайка. Плата чистая, следов флюса не видно. Со своей задачей справляется.
    Suggestion
    минусов не обнаружено, в работе я думаю не подведут. упакованы в обычный, не антистатический пакет.

    Apr 02,2018

  • Vladimir
    Yes (0) Color: Blue
    Li-Ion Charging controller
    Excellent charging board. I used it when I upgraded my electric screwdriver (something like this: http://www.gearbest.com/home-gadgets/pp_139162.html ) from Ni-Cd to Li-Ion.
    Suggestion
    -no ports for external signal LEDs;
    -no battery discharge protection.
    -Mini USB connector (not micro USB)

    Apr 11,2016

Customer Questions & Answers

  • All(3)
  • Product Information(3)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

Can a li ion mobile phone battery be connected directly to this module. Thanks

By Jerry siddall Jan-26/2017 11:10:26

A

Hello Jerry,

Thank you for your inquiry.

It is a Lithium Battery Charging Module already. 

Thank you, Let me know if you need any help.

Have a nice day!


Q

Does this work with 5v things? I need to power a Raspberry Pi Zero, which runs on 5V.

By William Dec-07/2016 01:47:53

A

Hello William,

Please note the input voltage is 4.5V-5.5V and the fully charged voltage is 4.2V. It can work with 5V things.

Thanks for your attention.

Q

Do you get a manual to let you know the USB pinout/function?

By nick Mar-09/2016 18:38:55

A

Hello nick,

Thank you for your inquiry,manual isn't included.Have a nice day.


Q

Can a li ion mobile phone battery be connected directly to this module. Thanks

By Jerry siddall Jan-26/2017 11:10:26

A

Hello Jerry,

Thank you for your inquiry.

It is a Lithium Battery Charging Module already. 

Thank you, Let me know if you need any help.

Have a nice day!


Q

Does this work with 5v things? I need to power a Raspberry Pi Zero, which runs on 5V.

By William Dec-07/2016 01:47:53

A

Hello William,

Please note the input voltage is 4.5V-5.5V and the fully charged voltage is 4.2V. It can work with 5V things.

Thanks for your attention.

Q

Do you get a manual to let you know the USB pinout/function?

By nick Mar-09/2016 18:38:55

A

Hello nick,

Thank you for your inquiry,manual isn't included.Have a nice day.


Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

3 Questions & Answers View All>

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here