All
Product keywords
Please enter the email address account
Heatsink Heat Dissipation Panel for Raspberry Pi 3pcs
Share to:

Heatsink Heat Dissipation Panel for Raspberry Pi 3pcs

- Silver
NZ0026901

1.23
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Aug 10 - Aug 12, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance
Recommended for You
Customers also shopped for

Descriptions

Overview:
These adhesive-backed aluminum heatsinks are exclusively made for Raspberry Pi. They offer a significant cooling advantage over the non-cooled stock state. Better cooling means longer life span of your Raspberry Pi board and higher overclock speed.

Why do you need to put heatsinks on your Raspberry Pi?
● Reduces the risk of hardware failure because of overheating
● If you are into overclocking your Pi, this is a must

 Aluminum Heat Dissipation Panel for Raspberry Pi - 3pcs Pack- Silver
Features:
● One large heat sink for ARM processor, two small heatsinks one for LAN controller and the other for 3.3V regulator
● 3M adhesive thermal tape for efficient thermal transfer to the heat sink, providing additional cooling to the IC
● Can be used with other devices such as the Beaglebone to cool the processor, regulators, etc.
● Also works on the SMCI USB/NIC controller chip, although it is somewhat larger than the chip itself

Specification

General

Mainly Compatible with: Ardunio
Material: Aluminum
Color: Silver

Weight and Size

Product weight: 0.0020 kg
Package weight: 0.0240 kg
Package Size(L x W x H): 5.00 x 5.00 x 3.00 cm / 1.97 x 1.97 x 1.18 inches

Package Contents

Package Contents: 1 x Chip Heat Dissipation Panel ( 14 x 14 x 6 mm ), 2 x Chip Heat Dissipation Panel ( 8 x 8 x 4 mm )
Aluminum Heat Dissipation Panel for Raspberry Pi - 3pcs Pack- Silver
Aluminum Heat Dissipation Panel for Raspberry Pi - 3pcs Pack- Silver

Suggested Products

Customer Reviews

4.9 out of 5
  • 513
  • 52
  • 1
  • 0
  • 0
See all 565 reviews Write a Review
  • Markus M
    Yes (0) Color: Silver
    Mr.
    Build quality ok, nothing polished or anything, for this price, very nice, no sharp edges or anything.

    There should be 3 sizes to fit perfectly on raspberry pi 3. Graphics chip is bigger than small cooler, so not optimized for rasp3. But this should still be more than enough cooling, cause it will manage withouth coolers too... Recommend if you are not overclocking your device or keeping it in total closed box.
    Suggestion
    For graphics chip under pi, it wont be big enoug.... (the smaller one) but for this price, thats ok :)

    Mar 27,2018

  • Io sì
    Yes (0) Color: Silver
    Great for Pi
    These adhesive-backed aluminum heatsinks are exclusively made for Raspberry Pi. They offer a significant cooling advantage over the non-cooled stock state. Better cooling means longer life span of your Raspberry Pi board and higher overclock speed.

    Why do you need to put heatsinks on your Raspberry Pi?
    ● Reduces the risk of hardware failure because of overheating
    ● If you are into overclocking your Pi, this is a must
    Suggestion
    None

    Mar 06,2018

  • Aurelian
    Yes (0) Color: Silver
    tiny heatsinks
    Not much to say about these heatsinks. They are really tiny, as the chips they are meant for. I plan on using them on some buck converters, but that project is still in the shipping stages of development. When I bought this set it was about 0.7 USD, if it helps anyone knowing this.

    Mar 05,2019

  • Mario
    Yes (0) Color: Silver
    Ottimo prodotto
    Il processore montato sul Raspberry è il BCM2837 e da specifiche tecniche la temperatura limite di operatività è di 85°C. Anzi la scheda presenta già varie problematiche già oltre gli 80°C. Quindi se esistono casi in cui il processore rimane in attività per lunghi periodi a 87°C la situazione potrebbe essere drammatica per la vita della scheda Raspberry, e quindi sarebbe necessario montare un sistema di raffreddamento con dissipatori e ventole. Questi dissipatori svolgono egregiamente il loro compito
    Suggestion
    nessuno

    Oct 04,2017

  • brainiac2530@gmail.com
    Yes (0) Color: Silver
    Dissipador para Raspberry Pi - Dissipation for Raspberry Pi
    Super simples de usar, apenas tirar o papel e colar. Serve para outras placas como Banana Pi e Orange Pi. Muito barato. Recomendo


    Super simple to use, just take off paper and paste. Serves for other plates like Banana Pi and Orange Pi. Very cheap. I recommend
    Suggestion
    Nada ate agora. vale a pena.


    Nothing until now. worth it.

    Apr 24,2018

FAQ for Heatsink Heat Dissipation Panel for Raspberry Pi 3pcs

  • I've plugged my Raspberry Pi in, but nothing is appearing on the screen. What's wrong?

    It is important that you connect your cables in the correct order, ensuring that the HDMI cable is plugged in before the power.
  • Only the red light on my Pi is on! Is it broken?

    1. Check that your SD card is inserted correctly into your Raspberry Pi.

    2. Check that your SD card contains the software required for the Raspberry Pi to boot.

  • Do I need another computer to use a Raspberry Pi?

    You don't need another computer to use a Raspberry Pi, as it's a computer in its own right. However, when you need to create new micro SD cards, you might need occasional access to another computer.
  • I've copied NOOBS to an SD card, but it gets stuck on the splash screen. What should I do?

    If NOOBS won't load once you have copied the files over, it may be that you have a corrupt SD card. If you've tried a different SD card and NOOBS still doesn't work, then you might want to try installing Raspbian directly.
  • I have a Raspberry Pi 3. Do I need a special power supply?

    For most uses, the original official power supply will be fine.
  • Why Raspberry Pi boot sequence failures?

    Unlike a PC, the Raspberry Pi does not have a BIOS, so without a working software image, it is stone-cold-dead. Without a working OS, and if the power supply works, the only thing guaranteed to happen is that the red power LED turns on. If an image at least starts to boot, then looking at the status LEDs and the HDMI monitor can provide some indication of where the boot process failed.
  • Rainbow screen, what can i do?

    The rainbow flash screen should only appear for about a second (good). If the boot process halts with the rainbow screen on the monitor (bad), there may be a power supply issue, or a kernel software problem.
  • Bad or missing SD card, what is the problem?

    Using a Raspberry Pi 2 as an example, if there is no activity on the monitor and if the red and green status LEDs stay lit and un-blinking after power up, the SD card may not be fully inserted, not detected properly, not flashed or not formatted correctly.
  • No WiFi networks found during discovery scan?

    The activity LED on the WiFi dongle provides minimal indication of WiFi activity. If No WiFi networks are found, and it is flashing normally, there is no WiFi reception. If not flashing at all, the power requirements of the WiFi dongle may be over 150 mA, too high for a Pi USB port, or over 300 mA on a Pi B+, 2, and later versions (unlikely).
  • Why local WiFi network not found?

    It may take one or two minutes to find all available WiFi networks. If the local network does not appear in the list, the WiFi portion of the local router may be down or disabled, reception may be bad, or the router may not be responding to WiFi discovery.
  • Can this item be shipped to my country?

    We can deliver orders to most countries. For a detailed explanation of each shipping method, destination and approximate delivery time, please check our posts:

    GearBest shipping methods

    20 things you need to know when shopping on GearBest

    Short guide on tracking fees and shipping insurance on GearBest

    GearBest shipping memo: save money on delivery by choosing the best option

  • View More

Customer Questions

  • All(2)
  • Product Information(2)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

It works on Raspberry Pi 3?

By Milton Nov-16/2017 12:33:05

A
Hello Milton,Yes, it is for Raspberry Pi. Let me know if you need any further assistance. 
Q

This heatsink work to orange Pi PC????

By Daniel Fernando Feb-03/2017 14:52:46

A
Hello  Daniel,  This is a raspberry heat sink that does not apply to orange pie.Thanks for your inquiry.

2 Questions & Answers View All

Sponsored Products Related to This Item

Shipping

There are two key factors which will affect the time you receive your items.

1
Item processing time
After receiving your order,we require some time to test the product to ensure its quality.The exact processing time varies depending on the item.The average processing time is 3 working days.but this can also be affected by the item's stock status. For small quantity orders,the processing time is 1-3days while larger quantity orders may require 2-5days.
2
Shipping methods
China Warehouse:
Shipping Type Country or Region Arrive within 1-7 Days Arrive within 8-15 Days Arrive within 16-30 Days Arrive within 31-45 Days Average Time (Days)
Unregistered Air Mail or Registered Air Mail United States 0.52% 44.87% 49.88% 3.5% 18.13
Spain, United Kingdom, Italy, Germany, France & Portugal 5.18% 43.44% 48.34% 1.17% 15
Netherlands, Greece, Poland, Hungary, Slovakia, Czech Republic 2.96% 40.34% 52.54% 3.74% 18.66
Russia 0% 4.45% 84.41% 11.1% 28
Japan, Korea 0% 21.30% 68.80% 9.66% 17.75
Brazil 0% 0% 23.91% 72.09% 38.6
Turkey 0% 37.75% 59.05% 3.1% 20.33
Thailand, Singapore & Malaysia 0% 40.39% 56.12% 2.6% 16.2
Other countries 0.7% 38.79% 47.94% 8.56% 23.57
Priority Line United States 12.28% 79.05% 7.4% 0.52% 11.75
Spain, United Kingdom, Italy, Germany, France & Portugal 8.44% 66.56% 23.45% 0.45% 13.55
Russia 0% 3.48% 75.79% 20.04% 31
Brazil 2.21% 6% 61.29% 25.46% 30
Turkey 20.42% 77% 3% 0.08% 10
Australia 7.67% 86.60% 5.68% 0% 11
Korea 97.54% 1.57% 0.89% 0% 7
Japan 95.80% 2.09% 0% 0% 6.84
Thailand, Singapore & Malaysia 58.96% 41.04% 0% 0% 8.45
Other countries 22.33% 30.8% 27.62% 17.64% 18.65
Expedited Shipping ALL countries(EMS) 3.8% 46.8% 26% 15% 14.8
ALL countries(DHL) 65.8% 25.75% 3.86% 0.37% 6.72
GW Warehouse: Typically 3-5 days to the UK, 3-7 days to other European countries.
USA Warehouse: Generally, 3-7 days to a USA address.
ES Warehouse: Generally, 2-5 days to the Spain, 3-7 days to the Portugal.
Shipping from warehouse nearest to shipping address is faster. Additional charges may apply.
Note: This is a general guide and delays maybe caused force majeure, natural disasters, inclement weather, war, public holidays, and factors outside our control. Generally speaking, we offer free shipping for Heatsink Heat Dissipation Panel for Raspberry Pi 3pcs to United States (US, USA), United Kingdom (UK, GB), Germany, Italy, France, Spain, Portugal, Poland, Brazil, Russia, Japan, Greece, Austria, Hungary, Slovakia, Czech Republic, Ireland, Lithuania, Israel, Denmark, Norway, Sweden, Canada, Australia, Netherlands, Korea, Turkey, Mexico, Ukraine, Romania, Columbia, Thailand, Singapore, Malaysia etc. Please choose the shipping methods for the final price.

Payment

Gearbest.com accepts PayPal,Credit Cards,Wire Transfer,Westem Union, YandexMoney,Webmoney,Boleto,OXXO and BKM as secure payment methods.

1
Paypal
The most convenient payment method in the world.
2
Wire transfer
For orders which exceed $1,500,please contact us at support@gearbest.com.
Note: please email us the order number,the amount transferred along with currency type,and the exact date of the wire transfer.
3
Western Union
Please contact us at support@gearbest.com for details.
Note: please email us the following information after you have paid via Westem Union:
· Control Number(10 digits)
· The exact amount sent along with the currency
· Name of sender.
· Address of sender
4
YandexMoney、 Webmoney
With YandexMoney and Webmoney, it is convenient and safe for you to pay via credit card、wallet or cash
5
Boleto
For Brazil customers, we accept Boleto: you only need to fill in the payment information, remember your Boleto Voucher information and pay it within 3 days at any Boleto stores.
6
OXXO
For Mexico customers, we accept OXXO: you can choose OXXO payment on our website, and then remember your OXXO Voucher information and pay it within 3 days at any OXXO stores.

Do you want to bulk buy ? Please submit your wholesale inquiry below. Please note we usually don’t offer free shipping on wholesale orders, but the wholesale price will be a big bargain.

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service