HGLRC Flipsky Dual FSESC4.20 100A ESC with Anodized Aluminum Heatsink
Share to:

HGLRC Flipsky Dual FSESC4.20 100A ESC with Anodized Aluminum Heatsink

- BLACK 281081901

182.69
  • FREE SHIPPING Ship between: Dec 20 - Dec 22, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer Repair Warranty Report item
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought

The Flipsky ESC is based upon the VESC Open Source Project, and compatible with VESC Software.

The Flipsky ESC is a highly modifiable electronic speed controller designed with DIY Electric Skateboards conversions in mind.

The Flipsky ESC allows you to use sensorless motors to achieve smooth start-up from a stop versus traditional RC ESC's which may have trouble starting from a complete stop. It also provides strong. reliable and progressive electric braking.
You can connect your ESC to your computer and modify them using the VESC BLDC Tool. Our ESC ships to you tested multiple times during the production cycle and are ready to use. The ESC will provide optimum performance when configured for your particular motor and battery voltage.

Main Features:
● STM32F4 32Bit ARM microcontroller.
● DRV8302 MOSFET driver / buck converter / current shunt amplifier.
● NVMFS5C628NL MOEFETs.
● 5V 1.5A output for external electronics from the buck converter integrated on the DRV8302.
● Voltage: 8V - 60V ( 3s to 13s LiPo ).
● Current: up to 240A for a couple of seconds or about 50A continuous depending on the temperature and air circulation around the PCB.
● Firmware based on ChibiOS real-time OS.
● PCB size: slightly less than 44mm x 78mm.
● Current and voltage measurement on all phases.
● Regenerative braking.
● DC motors are also supported.
● Sensored or sensorless operation.
● A GUI with lots of configuration parameters.
● Adaptive PWM frequency to get as good ADC measurements as possible.
● RPM‐based phase advance ( or timing / field weakening ).
● Good startup torque in the sensorless mode ( and obviously in the sensored mode as well ).
● The motor is used as a tachometer, which is good for odometry on modified RC cars.
● Duty‐cycle control, speed control or current control. Seamless 4‐quadrant operation.
● Interface to control the motor: PPM signal ( RC servo ), analog, UART, I2C, USB or CAN‐bus. 
● Wireless WII nunchuk ( Nyko Kama ) control through the I2C port. It is convenient for electric skateboards.
● Consumed and regenerated amp‐hour and watt‐hour counting.
● Optional PPM signal output. Useful when e.g. controlling an RC car from a Rasp Berry Pi or an Android device.
● The USB port uses the modem profile, so an Android device can be connected to the motor controller without rooting. Because of the servo output, the odometry and the extra ADC inputs(that can be used for sensors), this is perfect for modifying an RC car to be controlled from Android ( or Raspberry Pi ).
● Sensored and sensorless ( FOC ) Field Oriented Control allows your electric skateboard to run with barely any motor noise.
● Many safety features such as current control and temperature control features.
● Great start-up torque with sensorless motors.
● V4.20 hardware.
● Sensored and sensorless FOC auto-detection of all motor parameters is implemented since FW3.34.
● Bootloader and firmware loaded. With motor detection and FOC tested. 12AWG motor wires.
● The motor is used as a tachometer, which is good for odometry on modified RC cars.
● Good start-up torque in the sensorless mode ( and obviously in the sensored mode as well ).
● Duty-cycle control, speed control or current control.
● Seamless 4-quadrant operation.
● Consumed and regenerated amp-hour and watt-hour counting.
● Optional PPM signal output. Useful when e.g. controlling an RC car from a raspberry pi or an Android device.
● Adjustable protection against:
- Low input voltage
- High input voltage
- High motor current
- High input current
- High regenerative braking current ( separate limits for the motor and the input )
- Rapid duty cycle changes ( ramping )
- High RPM ( separate limits for each direction ).
● When the current limits are hit, a soft back-off strategy is used while the motor keeps running. If the current becomes way too high, the motor is switched off completely.
● The RPM limit also has a soft back-off strategy.
● Commutation works perfectly even when the speed of the motor changes rapidly. This is due to the fact that the magnetic flux is integrated after the zero crossing instead of adding a delay based on the previous speed.
● When the motor is rotating while the controller is off, the commutations and the direction are tracked. The duty-cycle to get the same speed is also calculated. This is to get a smooth start when the motor is already spinning.

Specifications
● Hardware: V4.20
● Firmware: new
● Amps: 50A continuous / 240A peak
● Cells: 3 - 13S LiPo
● Voltage: 8V - 60V
● BEC: 5V 1.5A
● BEC type: internal driver support 
● Timing: software calibration 
● Cutoff Voltage: programmable
● Frequency: PWM input 
● Governor: no
● Weight: 150g
● PCB Size: 44 x 78 x 17.4mm
● Size:65 x 79 x 19mm ( include heatsink )
● Programming card: no
● Reverse: yes

Specification

General

Brand: HGLRC
Type: ESC

Dimension and Weight

Product weight: 0.1500 kg
Package weight: 0.2500 kg
Package size (L x W x H): 20.00 x 14.00 x 4.00 cm / 7.87 x 5.51 x 1.57 inches

Package Contents

Package Contents: 1 x ESC

HGLRC Flipsky Dual FSESC4.20 100A ESC with Anodized Aluminum Heatsink for RC Drone- Black

HGLRC Flipsky Dual FSESC4.20 100A ESC with Anodized Aluminum Heatsink for RC Drone- Black

HGLRC Flipsky Dual FSESC4.20 100A ESC with Anodized Aluminum Heatsink for RC Drone- Black
HGLRC Flipsky Dual FSESC4.20 100A ESC with Anodized Aluminum Heatsink for RC Drone- Black
HGLRC Flipsky Dual FSESC4.20 100A ESC with Anodized Aluminum Heatsink for RC Drone- Black
HGLRC Flipsky Dual FSESC4.20 100A ESC with Anodized Aluminum Heatsink for RC Drone- Black

Guess you like

Customer Reviews

0
  • 0
  • 0
  • 0
  • 0
  • 0
See all 0 reviews Write a Review

Get GB Points! Be the FIRST to Write a Review!

Customer Questions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

0 Questions & Answers View All>

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here