All
Product keywords
Please enter the email address account
F4 V5 PRO Flight Controller with OSD
Share to:

F4 V5 PRO Flight Controller with OSD

- Colormix
234680701

5V 3A BEC / Current Sensor / 5.8GHz 40CH 25mW 200mW 600mW FPV Transmitter
48.52
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Nov 21 - Nov 23, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance

Recommended for You

Customers also shopped for


Description:
F4 V5 PRO is integrated with 5.8GHz 40CH video transmitter whose output power can be switched among 0 / 25mW / 200mW / 600mW. It has BetaFlight OSD and allows you to tune PID directly via your transmitter. The flight controller can be connected to 2 - 6S LiPo and support 200A maximum current. The built-in BetaFlight OSD and compatibility with BLHeli - S enable you to take advantages of the latest DShot protocol and much more accurate control.

Main Features:
● Advanced STM32F405RGT6 processor, onboard 16MB flash for flight data logging
● MPU6000 connected via SPI, high-speed data sampling
● BetaFlight OSD designed for tuning PID via transmitter
● Integrated with current sensor and 5V 3A BEC
● 5.8GHz 40CH VTX, 0 / 25mW / 200mW / 600mW adjustable power
● 4 x 3oz copper PCB supports 2 - 6S LiPo and up to 200A current
● Compatible with mainstream receivers, such as SBUS / PPM / DSMX receivers etc.
● Supports buzzer, LED strip, voltage monitoring, and BLHeli - S ESC programming

Specifications:
Processor: STM32F405RGT6
IMU: MPU6000
Firmware: BetaFlight
Power supply: 2 - 6S LiPo
Max. current support: 200A
BEC output: 5V 3A
Mounting hole spacing: 30.5 x 30.5mm
Video transmitter frequency: 5.8GHz
Channels: 40 ( including RaceBand, Band E )
Output power: 0 / 25mW / 200mW / 600mW
Antenna adapter: with RP-SMA female connector

Click here to download the wiring diagram.

Specification

General

Type: Flight Controller

Flight Controller

Flight Controller Type: F4

Dimension and Weight

Product weight: 0.0140 kg
Package weight: 0.0400 kg
Product size (L x W x H): 4.70 x 4.40 x 0.70 cm / 1.85 x 1.73 x 0.28 inches
Package size (L x W x H): 10.00 x 5.00 x 5.00 cm / 3.94 x 1.97 x 1.97 inches

Package Contents

Package Contents: 1 x Flight Controller, 1 x XT60 Male Connector, 1 x Buzzer, 1 x Antenna Adapter, 2 x 8-pin Cable, 1 x 6-pin Cable
F4 V5 PRO Flight Controller with 5V 3A BEC / Current Sensor / 5.8GHz 40CH 25mW 200mW 600mW FPV Transmitter- Colormix
F4 V5 PRO Flight Controller with 5V 3A BEC / Current Sensor / 5.8GHz 40CH 25mW 200mW 600mW FPV Transmitter- Colormix
F4 V5 PRO Flight Controller with 5V 3A BEC / Current Sensor / 5.8GHz 40CH 25mW 200mW 600mW FPV Transmitter- Colormix
F4 V5 PRO Flight Controller with 5V 3A BEC / Current Sensor / 5.8GHz 40CH 25mW 200mW 600mW FPV Transmitter- Colormix
F4 V5 PRO Flight Controller with 5V 3A BEC / Current Sensor / 5.8GHz 40CH 25mW 200mW 600mW FPV Transmitter- Colormix

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

Suggested Products

Customer Reviews

4.89 out of 5
  • 32
  • 2
  • 1
  • 0
  • 0
See all 35 reviews Write a Review
  • TehllamaFPV
    Yes (0) Color: Colormix
    My favorite budget flight controller.
    I've had similar products, but the Furibee variant is actually the most solid and reliable I've tried. The silicone wiring is actually the best on the Furibee version, and the 5V BEC on these is more solid than other variants.

    I now have 7 quads with this flight controller, and they've survived 6S 7" builds, two fires (with the FC/VTX still working), and hundreds of packs.

    I can't recommend these enough at the $30 price point - I'm able to set up complete sets of electronics (FC/VTX/Rx/ESCs/Antennas) for under $100 with top end parts.

    Oct 26,2018

  • Dan
    Yes (0) Color: Colormix
    Great looking FC - had the flashing issue though
    I've yet to fly the board but it arrived in perfect condition so I\'m hoping for good things. However, I did have the issue where I couldn\'t flash betaflight to the board but the fix couldn\'t be simpler. Close betaflight, BLHeliSuite and anything else connected to the FC then run ImpulseRC Driver Fixer (https://impulserc.com/pages/downloads) with the FC connected to the computer via USB. This should fix the issue so you can then connect on Betaflight as normal.
    Suggestion
    only the USB connection issue so far

    Mar 07,2018

  • Владислав
    Yes (0) Color: Colormix
    Полетный контроллер F4 V5 с интегрированной PDB и VTX
    Convenient PC with integrated power distribution Board and video transmitter. All conclusions are convenient for installation. The kit includes a capacitor, a buzzer, as well as all the necessary connecting wires and cables. It is possible to solder the battery connector directly to the Board or through the wires. Buy for the second PC for their quadcopters.
    Suggestion
    This is a cheaper analog of a PC from another well-known brand, this Board is thinner and it has fewer layers of copper.

    Apr 05,2018

  • ok
    Yes (0) Color: Colormix
    F4 V5 PRO Flight Controller with OSD - COLORMIX
    A very good FC. Very useful. We\'ll see in time how it works and how seriously it\'s built. Have Betaflight.
    Suggestion
    non

    Apr 03,2018

  • Arnaud
    Yes (0) Color: Colormix
    Good card !
    Very good flight card, just need to remap the engines if you change the sense card (Lipo jack on the back).

    Big saving of space with this card aio, perfect for replacing my orginal fly card on my Diatone GT2, I will buy one other !
    Suggestion
    - need to remap motors

    Feb 12,2018

Customer Q&A

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

0 Questions & Answers View All

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service