Aqara Smart Home Water Sensor ( Xiaomi Ecosystem Product )

Very good sensor for working with MI HOME. Sometimes there are difficulties connecting to the system. Procedure for reconnecting the Aqara sensor: 1. Turning off the Gateway gateway from the outlet so that the ZigBee network disappears (there is an opinion that it is necessary to disconnect other devices working on it it took); 2. We clamp the center button on the sensor, if the ZigBee network is missing, it should go into pairing mode (the indicator often starts 3. Here you need to catch 2 points, pairing mode is active for about 20 seconds, during this time it is necessary to plug the gateway into an outlet, wait for it MiHome and add a device as above. When the pairing timer appears on the phone screen, the device button must be released Sometimes re-connects poorly. Great thing. I decided to buy myself to protect myself and did not regret, I put them in the kitchen, where a bunch of cabling was placed on the washing machine, a filter for sink, bathroom and toilet, direct toilet, wiring further into the apartment from the riser, hygienic shower, etc. how it works you can look at the video - the response is about two seconds, yelling so it will raise the dead, I will deal with the application, setting up the SC Install the application Mi Home - choose "Mainland China" otherwise it will not work. Next, you need a xiaomi gateway, install it well choose a location and rename, then enjoy the security.

May 07,2019

I purchased the entire sensor line: door, presence, vibration, water together Aqara hub and the camera 360 Xiaomi. Convenient to install: have wifi and put them where you want, the battery is long lasting. Simple to set up (average user and a bit of patience): with the app Xiaomi I have everything under control. I created each type of automation / interaction between the sensors and the hub. I receive notifications on my phone, iPad to every event that I can review when I want even in the event log. The camera records and stores 3 s video when motion is detected. The only limit to the system configuration is fantasy. It also works with Apple Home but you must have the Apple hub. Look cute: have clean lines, quality materials to the sight and touch. Reliable: after an electrical or a modem reset blackouts throughout the system restarts autonomously without any action on my part. Less than € 10 for switch and less than 40 € for a hub nothing is found at this level. You just have a little patience for the shipping time that sometimes exceed the month.

Jan 06,2020

Very good sensor for working with MI HOME. Sometimes there are difficulties connecting to the system. Procedure for reconnecting the Aqara sensor: 1. Turning off the Gateway gateway from the outlet so that the ZigBee network disappears (there is an opinion that it is necessary to disconnect other devices working under this protocol, but I did not need this); 2. We clamp the central button on the sensor, if there is no ZigBee network, it should switch to pairing mode (the indicator starts to blink frequently). We do not release the button yet; 3. Here you need to catch 2 points, the pairing mode is active for about 20 seconds, during this time it is necessary to plug the gateway into the socket, wait for it to initialize. Go to the MiHome application and add a device as above. When the pairing timer appears on the phone screen, the device button must be released. After that, the sensor binds.

Suggestion

Sometimes re-connects poorly.

Jul 15,2018

Great thing. I decided to buy myself to protect myself and did not regret it, put it in the kitchen, where a lot of wiring was placed on a washing machine, a water filter, a faucet, a bathroom was a sink, a bathroom and a bathroom, directly a toilet, wiring further to an apartment from a standpipe, a sanitary shower etc.
how it works can be seen on the video - the response is about two seconds, it screams so it will raise the dead, I will deal with the application, setting up scripts and notifications.
Installing the Mi Home application - choosing \ "Mainland China \" does not work otherwise. Next, you need a xiaomi gateway, install it, and then manually add the sensors, select a location and rename it, then enjoy the security.

Suggestion

the price is a bit high, but they are worth it.

Mar 28,2018

great product, alert when the water arrives and alert when the water is no longer there. I put it in 2 places: - in my basement, near the door below the garden: it is enough that rain is a little strong and carries a little earth / small pebbles and obstructs the evacuation of water at the bottom of the staircase and paf, that goes up very fast. So that the water can pass it takes a small height and suddenly, the sensor is activated without problem And when it is that time, it goes down little in the basement. It has already happened to us and before installing it, as soon as there was a bit of rain, we spent our time going down to check. - under my sink: after a leak of my dishwasher, I realized that there was a small lack of flatness on the wall side that was not embarrassing because masked and overtaken by the furniture. So, at this point, if I have to wait to see the water run 50cm wide furniture ... the sensor will clearly see the flood before.

Jan 16,2019