All
Product keywords
Please enter the email address account
ORTUR Laser Master 2 32-bit Motherboard Laser Engraving Machine 400 x 430mm Large Engraving Area Fast Speed High Precision Laser Engraver
Share to:

ORTUR Laser Master 2 32-bit Motherboard Laser Engraving Machine 400 x 430mm Large Engraving Area Fast Speed High Precision Laser Engraver

- Black 15W (EU Plug)
465106803

Good Safety Performance, LaserGRBL (LightBurn) Control Software for Fast Installation
208.99 $326.1 36% OFF
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Oct 28 - Nov 02, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance
Recommended for You

ORTUR Laser Master 2 Youtube Video Reviews

ORTUR Laser Master 2 Descriptions

Brief Introduction:
● The Laser Master 2 - 7W is good at picture engraving.
● The Laser Master 2 - 15W is the most cost-effective, available for both engraving and cutting.
● The Laser Master 2 - 20W is higher power and supports a faster engraving and cutting.

Main Features:
Specialized Motherboard with STM32 MCU
It could preprocess 32 instructions, support baud rate as high as 921600, more powerful!
The Most Advanced 32Bits Laser Engraver Firmware
Ortur laser master firmware, smarter, faster, higher precision and easier to use.
● Laser power range could be S0 - S1000, compared to 8bits desktop laser engravers, which only has S0 - S255, Ortur Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper , that the 8bits high power laser engravers could not do.
● Engraving speed could be as high as 3000MM/Min. ( If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S )
Active Position Protection
There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop.
Laser Beam Safety Guard
If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire.
Exposure Duration Detection and Limitation
If laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.
● LaserGRBL ( free software ) supports Windows XP, 7, 8, 10. LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the engraver via laser LaserGRBL for engraving and cutting.
● LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Mac OS, and Linux. It's the most popular paid carving software in the world, very easy to use.
● This laser engraver supports PWM mode.
● Pre-assembled parts, just need 10 - 20 minutes to install the machine.
● 400 x 430 mm large engraving area.
● Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance
● Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.

Specification:
● Motherboard: 32 bits motherboard with STM32 MCU
● Firmware: Ortur Laser Master Firmware
● OS of Upper Computer: Windows ( Working with LaserGRBL ), MAC OS and Linux ( Working with LightBurn )
● Power of Laser Engraver: 36W, 12V 3A
● Electrical Power of Laser Module: 7W, 15W, 20W
● Wave Length: 445 ± 5nm
● Variable Focus: Yes
● Default Focal Length: 55MM for 15W & 20W Laser Module; 58MM for 7W Laser Module
● Input Format: NC, BMP, JPG, PNG, DXF, etc.
● Carving Area: X: 400MM x Y: 430MM
● Carving Speed: 3000MM / Min and less
● Image size: No Limit ( The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it's about 0.81um pixel precision )

Note:
● Please wear goggles when operating the laser engraver. Wear safety goggles to avoid blindness.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
● This product is not recommended for industrial cutting due to its high engraving speed.

Tip: Because the software is constantly updated and optimized, please click here to view the updates.

Specification

General

Brand: Ortur
Model Number: Laser Master 2
Type: Laser engraving machine
Material: Aluminum + Acrylic
Laser Power: 7w (Electrical Power: 7W, Luminous Power: 1200-1600 mw), 15w(Electrical Power: 15W, Luminous Power: 4000-4500 mw), 20w(Electrical Power:20W, Luminous Power: 5000-5500mw)
Laser Reaching Range: 445 ± 5nm
Power By: Power Adapter 12v 3A

Dimensions and Weight

Product weight: 2.8000 kg
Package weight: 3.4000 kg
Product size (L x W x H): 57.00 x 55.00 x 17.52 cm / 22.44 x 21.65 x 6.9 inches
Package size (L x W x H): 58.00 x 20.00 x 11.00 cm / 22.83 x 7.87 x 4.33 inches

Package Contents

Package Contents: 1 x Laser Engraving Machine
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)
ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)


ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)




ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)

ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-bit Motherboard - Black 15W (EU Plug)

Suggested Products

Customer Reviews

4.84 out of 5
  • 60
  • 7
  • 0
  • 0
  • 1
See all 68 reviews Write a Review
  • Logan Swafford
    Yes (2) Color: Black Size: 20W (US Plug)
    This is Overall a great product. 20W does as advertised.
    This is a great budget laser engraver. I have the 20W version and it can do everything as advertised. Do not the fact it is a budget engraver deceive you though, this is not necessarily for beginners. The product comes partially assembled, so you have to build the rest. Inexperienced builders/engravers use their inexperience as a reason to give great products like this a bad review. If you are a beginner, learning this machine is very doable. Just read the instructions carefully and watch the assembly videos provided carefully. While this product is great and deserves 5 stars, Gearbest has been horrible to work with. The customer service is mostly automated and not great. It took over 40 days to get this product when told me originally it would take 15. It ended up being worth the wait though. I received all the parts I needed and its working well. I have already made some really cool stuff with it. Great Product!

    Jun 20,2020

  • Simple Builds
    Yes (2) Color: Black Size: 15W (US Plug)
    Off to a great start!
    Easy assembly and the basic software is a good place to start, however for more advanced use I will be using Light Burn. The only Con is that the software it comes with does not say what the alarm codes mean.

    Note for Hobbyists the machine does get residual power from your computer and it appears to be on. The power even is enough to light up the green LED on the power supply. I spent over an hour checking the wires and searching for error codes because it recognized the machine and appeared to be on. After reading that someone else had similar issues I checked the power and sure enough the surge protector that I plugged into was not on. I felt stupid but was redeemed when I made my first engraving in just minutes after finally getting power.

    Sep 03,2020

  • Suitmonkey
    Yes (5) Color: Black Size: 15W (US Plug)
    Great machine, works very well
    The machine is great and worked flawlessly without any hiccup. Installation got a little tricky but following some instructions after reading again, it all worked. I am using Lightburn on windows and the Ortur performs very well. In terms of capability, it can manage to"cut" 3mm ply after 6-7 passes, but I would recommend using it more for engraving. I am using it mainly for wood. I took the 20W option which is actually 5W laser output, so please be sure of the purpose you are buying this for.
    The negatives - the power adaptor supplied with the machine is crappy and I have had to change that since it did not supply the required power and the gantry did not move initially. Worked well after replacement of the adaptor. Shipping is so darn slow.

    May 08,2020

  • Ortur Laser Master 2
    Yes (1) Color: Black Size: 15W (US Plug)
    Ortur Master 2 15 Watt Laser engraver
    Very high quality build on parts sent, detailed video on how to assemble located at Tinyurl website. Look for firmware upgrades and full instructions there as well. Very important to upgrade firmware correctly ! Always wear protective glasses included as this thing can blind you permanently. Place it in well ventilated area preferably with power exhaust system. Tip, I watch my engraver via wifi camera on my phone after starting it up to burn so I don't need to be in same room as laser. Overall good value for money, see youtube demo. Happy burning :-)

    Apr 11,2020

  • bobcat
    Yes (1) Color: Black Size: 20W (EU Plug)
    Excellent Laser Engraving Machine at a good price
    Package arrived in very good conditions, even if with some delay.
    The structure is quite solid once mounted.
    The mounting instructions are contained in a MS word document with many issues in the paging and some missed instruction.
    This made the building up activity a little more cumbersome than needed.
    In particular there is a connector (4 pin) that can be mounted in both direction (and the cables are all black). Unless is reversible this could be a risk.
    I did not yet start to carve, but I play a little bit with the commands to of the LaserGRBL software and the Laser engraving machine is well responding

    Jul 13,2020

FAQ for ORTUR Laser Master 2

  • How long does it take to assemble the Ortur Laser Master 2 Laser Engraver?

    It takes about 20 minutes to assemble.
  • Which engraving software does the Ortur Laser Master 15W support? How to download?

    It supports LaserGRBL. The download link is https://www.dropbox.com/s/w1yu3hpw6e5rxs2/Manual.zip?dl=0 Also supports LightBurn. The download link is https://lightburnsoftware.com/pages/trial-version-try-before-you-buy
  • What materials could the Ortur Laser Master 2 engrave?

    With LU7W laser module, it could engrave kraft papers, Wood, plastic (opaque), cloth, leather, sprayed metal, Anodised Aluminium, etc. With LU15W and LU20W laser module, it could engrave stainless steel, could cut Kraft paper, leather, 3MM ply wood, etc.
  • Can the Ortur Laser Master 2 engrave on metal and stainless steel?

    With LU7W laser module, it could engrave the sprayed metal, Anodised Aluminium, powder coated steel, but can not engrave the stainless steel directly. With LU15W and LU20W laser module, it could engrave stainless steel, but it need to use marker pen to paint black the surface of stainless steel to avoid the reflection of laser.
  • What is the maximum cutting thickness of wood plate of the Ortur Laser Master 2?

    With LU7W laser module, it could cut the thin kraft papers. With LU15W and LU20W laser module, it could cut 3MM plywood (cut 2-3rounds).
  • What is the engraving size of Ortur Laser Master 2?

    It is 400mm*430mm.
  • How many hours can the Ortur Laser Master 2 work continuously?

    24 hours (in an environment with good ventilation and heat dissipation)
  • What OS are available for Ortur Laser Master 2?

    Windows XP,Windows 7,Windows 8,Windows 10 OS Mac OS (Works with LightBurn control software) Linux OS (Works with LightBurn control software)
  • What types of files can Ortur Laser Master 2 read?

    NC, DXF, BMP, JPG, PNG, and other static images
  • Can the LU7W laser module be replaced by the LU15W or LU20W module?

    Yes
  • How soon can you ship the order?

    The order will be shipped as soon as possible after the order is placed, the specific delivery time is subject to the front page display
  • Can it engrave on a cylindrical surface?

    It need to use the Specialized Roller Pedestal (with motor) to instead of Y axis to roll the cylindrical object
  • Why do I have to wear goggles?

    Viewing laser engraving without goggles can cause eye discomfort. In addition, in the event of an accident, the laser light will enter the pupil, causing irreparable blinding damage.
  • Why must laser engraving machine have Active Position Protection function?

    If the machine detects unauthorized movement, the laser beam will stop, to avoid the unexpected damage.
  • Why must laser engraving machine have Laser Beam Safety Guard function?

    If your computer system halted or USB cable disconnected, led to that the laser engraver stop moving, the laser beam will stop, to prevent fire.
  • Why must laser engraving machine have Exposure Duration Detection and Limitation function?

    If laser engraver under control, but user forget to operate and keep the laser beam working, extra safety will cut off in case motor stopped moving, to prevent fire.
  • Why are the engraving/cutting result of some materials bad?

    Different materials have different engraving / cutting effects depending on the ignition point, light reflectance and light transmittance. All highly reflective and translucent materials must not be engraved or cut directly. And, even with the same material, the darker the color and the higher the absorbance, the better the engraving / cutting effect
  • Can metals such as copper, iron, and aluminum be engraved?

    Uncoated copper, iron, and aluminum cannot be engraved directly, especially copper metal, which has a high reflectivity. If engraved directly, the laser light may even be reflected back to the lens, causing the damage of laser module. In some videos show that copper is engraved. In fact, it engraved on the material which with electroplating copper effect, or the coating layer of the copper. And stainless steel could only be engraved when the surface is painted black by marker pen, so as to avoid the reflection of laser.
  • What could be the cause of motor stuck, XY axis not running smoothly, and limit switch not working ?

    They may caused by wire loosen. Please check the wires' connection of motor and limit switch.
  • What could be the cause of computer cannot identify when USB cable is insert to computer?

    It caused by no corresponding driver intalled. Windows XP/7 and Windows 8/10, as well as 64-bit and 86-bit systems, need to install different drivers.
  • What is the function of the LED indicator on the machine?

    The red light is the power indicator, when bright means machine starting, not bright means machine turning off, the fast flash means the power key is pressed, and the slow flash means the machine is in alarm state and needs to be unlocked. The blue light is the USB status indicator light, when bright, the USB cable is connected to the computer and recognized, while the off signal indicates that the USB cable is not connected or the computer is not equipped with the driver, and the flashing signal indicates that the engraved data is being transmitted.
  • Why do some materials need to be coated or painted black for engraving?

    For some transparent and highly reflective materials, the laser is hard to be absorbed, so, let the surface be coated or painted black, could ensure the laser to be absorbed by the target object and get a good engraving effect.
  • What impact does laser engraver have on people's daily life, and what convenience does it bring?

    Laser engraver refers to the operation method of connecting laser equipment to laser engraving software, and inputting artwork into automatic engraving. It is suitable for various industries, such as:
    1) Advertising industry: carving some logos, three-dimensional billboards, two-color board signs, employee badges, etc.;
    2) Clothing/leather industry: custom wallets or handbags logos and engraved textiles can be customized;
    3) Craft designer: can carve exquisite patterns on wood, bamboo, organic boards, etc.;
    4) Furniture industry: used for design and production of relief patterns, such as screens, craft wooden doors/windows, etc.;
    5) Jewelry decoration industry: fine jewelry carving, decorative product carving, etc.;
    6) Packaging industry: engraving and printing rubber plates, plastic plates, carton packaging rubber font production, etc.
  • What is a laser engraver? Why do you need a laser engraver?

    Laser engraver: It is an advanced equipment that uses laser to engrave materials that need to be engraved. In the period of rapid development of the modern CNC engraving machine industry, the use of laser engraving machines is becoming more and more widespread, mainly with the following advantages:
    1) Laser engraving does not need to contact the workpiece to be engraved, saves many tools, and the operating cost is very low;
    2) The high-precision characteristics of laser engraving are especially suitable for the processing of complex graphics;
    3) The laser beam under computer control can move at a high speed, the engraving process can be completed in a few seconds, and the processing efficiency is high;
    4) Due to the combination of laser technology and computer technology, users only need to carry out high-speed engraving and cutting according to the pattern output by the computer, and can change the printing design at any time, which fundamentally replaces the traditional mold making process and is more convenient.
  • What are the characteristics of laser engraver?

    1) Engraving size: The engraving size determines the size of the engraved product, so you must fully analyze your business needs to choose;
    2) Laser power: The laser power determines the effect of the engraving product, and different engraving materials are applicable to different powers, so you should choose the corresponding laser power engraving machine according to your engraving material;
    3) Software: Different laser engraving machines use different software. Some engraving machine factories have their own systems. Users need to download the software to use the engraving machine, which has poor compatibility; some laser engraving machines use the most popular ones in the world. The welcome free and open source engraving software LaserGRBL has strong compatibility but cannot be applied to Apple systems, while LightBurn (paid software) is applicable to all systems. Basically, there is no need to set machine parameters, and the experience is stronger.
  • What important information should be considered when purchasing a laser engraver?

    1) Laser power: The laser power largely determines the effect of the finished product, but it is not that the larger the laser power, the better effect. On the contrary, if some materials use a laser tube with a higher power, the effect will be bad, so depending on the material and content of the engraving, the appropriate laser power should be selected. For example, acrylic engraving and PVC engraving do not require much power, but wood and stone engraving and cutting of any material require a higher power laser module. Only get twice the result with half the effort;
    2) Engraving material: Because of the influence of laser power, different laser power, the engraving material is different, so you should choose the appropriate engraving machine according to your own engraving material. If you only use general materials for engraving machines, such as cardboard and acrylic, you only need to choose low-power ones. If you want to engrave stone, wood and other materials, it is recommended to choose high-power ones;
    3) Engraving speed and precision: The biggest difference between laser engraving machine and traditional engraving and manual engraving is that laser engraving machines with high precision and high engraving accuracy are more popular, so you must pay attention to the engraving of laser engraving machines when choosing Accuracy is a parameter. The higher the accuracy of engraving, the better the effect, and the more satisfied consumers and customers are. As a businessman, producing more products in the same time can bring more profits, so the engraving speed The speed is the key to making money;
    4) Safety protection: Laser has high power density and energy, and its brightness is dozens of times higher than sunlight and arc light. When the laser irradiates the eyes or skin, if the maximum allowable exposure of the human body is exceeded, it will cause tissue damage;
    ① Damage to eyes:
    If the eyes are directly irradiated by the laser, it will cause damage to the retina, cause vision loss, and in severe cases can instantly blind people.
    ② Damage to the skin:
    If the skin is directly irradiated by the laser, especially the focused beam, it will burn the skin, and this kind of burn will be difficult to heal. The laser power density is very high, the damage is greater, and it can cause severe burns. Long-term diffuse reflection of ultraviolet light and infrared light will cause serious consequences such as aging of human skin, inflammation and even skin cancer;
    ③ Hidden danger of electric shock:
    Laser processing equipment also has thousands to tens of thousands of volts of high-voltage electricity and large-capacitor energy storage equipment. If it is improperly operated or malfunctions, it may cause fatal electric shocks to the human body;
    ④ Harmful gas:
    When laser welding, cutting or cladding certain materials, these materials are heated by the laser to evaporate, vaporize, and produce various toxic metal fumes, and ozone generated by the plasma formed in the vicinity of the cutting surface during high-power laser heating. There is certain damage to the human body;
    Therefore, when using the laser engraving machine, avoid looking directly at the laser light. When purchasing the product, pay attention to whether it is equipped with protective goggles; at the same time, whether there is a protective function when the engraving machine is displaced, the computer crashes, or is not working for a long time. Machine; Special attention must be paid to prevent children from operating the machine alone to prevent unnecessary injury;
    5) Engraving size: Know the size of the product you want to process: choose the appropriate laser engraving machine according to the actual size of the product you want to engrave, that is, the choice of laser engraving machine engraving size, for example, the product you want to engrave The size is: 130mm*90mm, then you can choose the model with the engraving size: 150mm*160mm, but it is not necessarily good for the machine format to be large, because the large format equipment is of course more expensive, and some machines of poor quality The average laser output of each point of the equipment on the large format is unstable, resulting in different depths of engraved products on the same table, so it is correct to choose the most appropriate engraving size.
  • View More

Customer Questions

  • All(7)
  • Product Information(4)
  • Stock Status(2)
  • Payment
  • About Shipping
  • Others
Q

Does this also burn letter and words? I see it can definitely do a logo but can it do, say a company name above and below?

By Chris May-13/2020 22:51:35

A
Hello Chris, Yes, it could burn letter and words.
Q

Is it currently available?

By Tihomir Apr-25/2020 16:35:28

A
Hello Tihomir, yes it is in stock now.
Q

available in stock?

By Patrik Holácsik Apr-18/2020 11:07:21

A
Hi! It is in stock now.
Q

is this dsp or g code?

By Bob T Apr-15/2020 04:38:45

A
Hi,it is G code.
Q

Will the engraver ship to United States

By Terry Mar-18/2020 12:52:06

A
Hello Terry, yes the item can be shipped to United States.
Q

Hi, what is the maximum height the machine can engrave on?

By Roei Sagian Mar-09/2020 13:29:40

A
Hi!The maximum height is 65mm.
Q

Can I get a US plug?

By Tracey Mar-05/2020 10:46:09

A
Hi!We will send an adapter with all our products according to the order' s country of delivery.

7 Questions & Answers View All

Sponsored Products Related to This Item

Shipping

There are two key factors which will affect the time you receive your items.

1
Item processing time
After receiving your order,we require some time to test the product to ensure its quality.The exact processing time varies depending on the item.The average processing time is 3 working days.but this can also be affected by the item's stock status. For small quantity orders,the processing time is 1-3days while larger quantity orders may require 2-5days.
2
Shipping methods
China Warehouse:
Shipping Type Country or Region Arrive within 1-7 Days Arrive within 8-15 Days Arrive within 16-30 Days Arrive within 31-45 Days Average Time (Days)
Unregistered Air Mail or Registered Air Mail United States 0.52% 44.87% 49.88% 3.5% 18.13
Spain, United Kingdom, Italy, Germany, France & Portugal 5.18% 43.44% 48.34% 1.17% 15
Netherlands, Greece, Poland, Hungary, Slovakia, Czech Republic 2.96% 40.34% 52.54% 3.74% 18.66
Russia 0% 4.45% 84.41% 11.1% 28
Japan, Korea 0% 21.30% 68.80% 9.66% 17.75
Brazil 0% 0% 23.91% 72.09% 38.6
Turkey 0% 37.75% 59.05% 3.1% 20.33
Thailand, Singapore & Malaysia 0% 40.39% 56.12% 2.6% 16.2
Other countries 0.7% 38.79% 47.94% 8.56% 23.57
Priority Line United States 12.28% 79.05% 7.4% 0.52% 11.75
Spain, United Kingdom, Italy, Germany, France & Portugal 8.44% 66.56% 23.45% 0.45% 13.55
Russia 0% 3.48% 75.79% 20.04% 31
Brazil 2.21% 6% 61.29% 25.46% 30
Turkey 20.42% 77% 3% 0.08% 10
Australia 7.67% 86.60% 5.68% 0% 11
Korea 97.54% 1.57% 0.89% 0% 7
Japan 95.80% 2.09% 0% 0% 6.84
Thailand, Singapore & Malaysia 58.96% 41.04% 0% 0% 8.45
Other countries 22.33% 30.8% 27.62% 17.64% 18.65
Expedited Shipping ALL countries(EMS) 3.8% 46.8% 26% 15% 14.8
ALL countries(DHL) 65.8% 25.75% 3.86% 0.37% 6.72
GW Warehouse: Typically 3-5 days to the UK, 3-7 days to other European countries.
USA Warehouse: Generally, 3-7 days to a USA address.
ES Warehouse: Generally, 2-5 days to the Spain, 3-7 days to the Portugal.
Shipping from warehouse nearest to shipping address is faster. Additional charges may apply.
Note: This is a general guide and delays maybe caused force majeure, natural disasters, inclement weather, war, public holidays, and factors outside our control. Generally speaking, we offer free shipping for ORTUR Laser Master 2 to United States (US, USA), United Kingdom (UK, GB), Germany, Italy, France, Spain, Portugal, Poland, Brazil, Russia, Japan, Greece, Austria, Hungary, Slovakia, Czech Republic, Ireland, Lithuania, Israel, Denmark, Norway, Sweden, Canada, Australia, Netherlands, Korea, Turkey, Mexico, Ukraine, Romania, Columbia, Thailand, Singapore, Malaysia etc. Please choose the shipping methods for the final price.

Payment

Gearbest.com accepts PayPal,Credit Cards,Wire Transfer,Westem Union, YandexMoney,Webmoney,Boleto,OXXO and BKM as secure payment methods.

1
Paypal
The most convenient payment method in the world.
2
Wire transfer
For orders which exceed $1,500,please contact us at support@gearbest.com.
Note: please email us the order number,the amount transferred along with currency type,and the exact date of the wire transfer.
3
Western Union
Please contact us at support@gearbest.com for details.
Note: please email us the following information after you have paid via Westem Union:
· Control Number(10 digits)
· The exact amount sent along with the currency
· Name of sender.
· Address of sender
4
YandexMoney、 Webmoney
With YandexMoney and Webmoney, it is convenient and safe for you to pay via credit card、wallet or cash
5
Boleto
For Brazil customers, we accept Boleto: you only need to fill in the payment information, remember your Boleto Voucher information and pay it within 3 days at any Boleto stores.
6
OXXO
For Mexico customers, we accept OXXO: you can choose OXXO payment on our website, and then remember your OXXO Voucher information and pay it within 3 days at any OXXO stores.

Do you want to bulk buy ORTUR Laser Master 2 ? Please submit your wholesale ORTUR Laser Master 2 inquiry below. Please note we usually don’t offer free shipping on wholesale ORTUR Laser Master 2 orders, but the wholesale price will be a big bargain.

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service